[svn-commits] mspiceland: branch 1.2 r3411 - /branches/1.2/wcte12xp/

[SVN commits to the Digium repositories]

Author: mspiceland
Date: Mon Dec 10 18:53:29 2007
New Revision: 3411

URL: http://svn.digium.com/view/zaptel?view=rev&rev=3411
Log:
Reverting changes from 3405 so that I can do this the correct way.

Modified:
    branches/1.2/wcte12xp/base.c
    branches/1.2/wcte12xp/vpmadt032.c
    branches/1.2/wcte12xp/vpmadt032.h

Modified: branches/1.2/wcte12xp/base.c
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/base.c?view=diff&rev=3411&r1=3410&r2=3411
==============================================================================
--- branches/1.2/wcte12xp/base.c (original)
+++ branches/1.2/wcte12xp/base.c Mon Dec 10 18:53:29 2007
@@ -1425,10 +1425,7 @@
 	t1_setleds(wc, wc->ledtestreg, 0);
 
 #ifdef VPM_SUPPORT
-	if (t1_vpm150m_init(wc) < 0) {
-		module_printk("VPMADT032 module detected but there was an error during initialization.  If you still wish to use this card, please disable echo cancellation using vpmsupport=0 as a module parameter or replace the echo cancellation module.\n");
-		return -1;
-	}
+	t1_vpm150m_init(wc);
 	if (wc->vpm150m) {
 		module_printk("VPM present and operational (Firmware version %x)\n", wc->vpm150m->version);
 		wc->ctlreg |= 0x10; /* turn on vpm (RX audio from vpm module) */
@@ -1958,10 +1955,7 @@
 	
 	t1_enable_interrupts(wc);
 	t1_start_dma(wc);
-	if (t1_hardware_post_init(wc) < 0) {
-		module_printk("Hardware init failed.  Refusing to register broken hardware interface.\n");
-		return 0;
-	}
+	t1_hardware_post_init(wc);
 	t1_software_init(wc);
 	module_printk("Found a %s\n", wc->variety);
 

Modified: branches/1.2/wcte12xp/vpmadt032.c
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/vpmadt032.c?view=diff&rev=3411&r1=3410&r2=3411
==============================================================================
--- branches/1.2/wcte12xp/vpmadt032.c (original)
+++ branches/1.2/wcte12xp/vpmadt032.c Mon Dec 10 18:53:29 2007
@@ -641,7 +641,7 @@
 	return;
 }
 
-int t1_vpm150m_init(struct t1 *wc) {	
+void t1_vpm150m_init(struct t1 *wc) {	
 	struct vpm150m *vpm150m;
 	unsigned short i;
 	unsigned short reg;
@@ -666,14 +666,14 @@
 	if (!vpmsupport) {
 		module_printk("VPM Support Disabled\n");
 		wc->vpm150m = NULL;
-		return 0; /* not fatal for the card */
+		return;
 	}
 
 	vpm150m = kmalloc(sizeof(struct vpm150m), GFP_KERNEL);
 
 	if (!vpm150m) {
 		module_printk("Unable to allocate VPMADT032!\n");
-		return -1;
+		return;
 	}
 	memset(vpm150m, 0, sizeof(struct vpm150m));
 	
@@ -873,7 +873,7 @@
 		if ((request_firmware(&firmware, vpmadt032_firmware, &wc->dev->dev) != 0) ||
 		    !firmware) {
 			printk("VPMADT032: firmware %s not available from userspace\n", vpmadt032_firmware);
-			return -1;
+			return;
 		}
 #else
 		embedded_firmware.data = _binary_vpmadt032_bin_start;
@@ -942,7 +942,7 @@
 		goto failed_exit;
 	}
 
-	return 0;
+	return;
 
 failed_exit:
 	spin_lock_irqsave(&wc->reglock, flags);
@@ -950,7 +950,7 @@
 	spin_unlock_irqrestore(&wc->reglock, flags);
 	kfree(vpm150m);
 
-	return -1;
+	return;
 }
 
 /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Modified: branches/1.2/wcte12xp/vpmadt032.h
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/vpmadt032.h?view=diff&rev=3411&r1=3410&r2=3411
==============================================================================
--- branches/1.2/wcte12xp/vpmadt032.h (original)
+++ branches/1.2/wcte12xp/vpmadt032.h Mon Dec 10 18:53:29 2007
@@ -112,7 +112,7 @@
 extern int vpmdtmfsupport;
 extern struct pci_driver te12xp_driver;
 
-int t1_vpm150m_init(struct t1 *wc);
+void t1_vpm150m_init(struct t1 *wc);
 void vpm150m_cmd_dequeue(struct t1 *wc, volatile unsigned char *writechunk, int whichframe);
 void vpm150m_cmd_decipher(struct t1 *wc, volatile unsigned char *readchunk);
 int vpm150m_config_hw(struct t1 *wc);