[svn-commits] oej: branch oej/codename-pineapple r44695 -
/team/oej/codename-pineapple/conf...
svn-commits at lists.digium.com
svn-commits at lists.digium.com
Sat Oct 7 08:31:33 MST 2006
Author: oej
Date: Sat Oct 7 10:31:32 2006
New Revision: 44695
URL: http://svn.digium.com/view/asterisk?rev=44695&view=rev
Log:
Configuration...
Added:
team/oej/codename-pineapple/configs/sip3.conf.sample (with props)
Added: team/oej/codename-pineapple/configs/sip3.conf.sample
URL: http://svn.digium.com/view/asterisk/team/oej/codename-pineapple/configs/sip3.conf.sample?rev=44695&view=auto
==============================================================================
--- team/oej/codename-pineapple/configs/sip3.conf.sample (added)
+++ team/oej/codename-pineapple/configs/sip3.conf.sample Sat Oct 7 10:31:32 2006
@@ -1,0 +1,596 @@
+;
+; SIP Configuration example for Asterisk
+;
+; Syntax for specifying a SIP device in extensions.conf is
+; SIP/devicename where devicename is defined in a section below.
+;
+; You may also use
+; SIP/username at domain to call any SIP user on the Internet
+; (Don't forget to enable DNS SRV records if you want to use this)
+;
+; If you define a SIP proxy as a peer below, you may call
+; SIP/proxyhostname/user or SIP/user at proxyhostname
+; where the proxyhostname is defined in a section below
+;
+; Useful CLI commands to check peers/users:
+; sip list peers Show all SIP peers (including friends)
+; sip list users Show all SIP users (including friends)
+; sip list registry Show status of hosts we register with
+;
+; sip debug Show all SIP messages
+;
+; module reload chan_sip.so Reload configuration file
+; Active SIP peers will not be reconfigured
+;
+
+[general]
+context=default ; Default context for incoming calls
+;allowguest=no ; Allow or reject guest calls (default is yes)
+allowoverlap=no ; Disable overlap dialing support. (Default is yes)
+;allowtransfer=no ; Disable all transfers (unless enabled in peers or users)
+ ; Default is enabled
+;realm=mydomain.tld ; Realm for digest authentication
+ ; defaults to "asterisk". If you set a system name in
+ ; asterisk.conf, it defaults to that system name
+ ; Realms MUST be globally unique according to RFC 3261
+ ; Set this to your host name or domain name
+bindport=5060 ; UDP Port to bind to (SIP standard port is 5060)
+bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
+srvlookup=yes ; Enable DNS SRV lookups on outbound calls
+ ; Note: Asterisk only uses the first host
+ ; in SRV records
+ ; Disabling DNS SRV lookups disables the
+ ; ability to place SIP calls based on domain
+ ; names to some other SIP users on the Internet
+
+;domain=mydomain.tld ; Set default domain for this host
+ ; If configured, Asterisk will only allow
+ ; INVITE and REFER to non-local domains
+ ; Use "sip show domains" to list local domains
+;pedantic=yes ; Enable checking of tags in headers,
+ ; international character conversions in URIs
+ ; and multiline formatted headers for strict
+ ; SIP compatibility (defaults to "no")
+
+; See doc/README.tos for a description of these parameters.
+;tos_sip=cs3 ; Sets TOS for SIP packets.
+;tos_audio=ef ; Sets TOS for RTP audio packets.
+;tos_video=af41 ; Sets TOS for RTP video packets.
+
+;maxexpiry=3600 ; Maximum allowed time of incoming registrations
+ ; and subscriptions (seconds)
+;minexpiry=60 ; Minimum length of registrations/subscriptions (default 60)
+;defaultexpiry=120 ; Default length of incoming/outgoing registration
+;t1min=100 ; Minimum roundtrip time for messages to monitored hosts
+ ; Defaults to 100 ms
+;notifymimetype=text/plain ; Allow overriding of mime type in MWI NOTIFY
+;checkmwi=10 ; Default time between mailbox checks for peers
+;vmexten=voicemail ; dialplan extension to reach mailbox sets the
+ ; Message-Account in the MWI notify message
+ ; defaults to "asterisk"
+;disallow=all ; First disallow all codecs
+;allow=ulaw ; Allow codecs in order of preference
+;allow=ilbc ; see doc/rtp-packetization for framing options
+;
+; This option specifies a preference for which music on hold class this channel
+; should listen to when put on hold if the music class has not been set on the
+; channel with Set(CHANNEL(musicclass)=whatever) in the dialplan, and the peer
+; channel putting this one on hold did not suggest a music class.
+;
+; This option may be specified globally, or on a per-user or per-peer basis.
+;
+;mohinterpret=default
+;
+; This option specifies which music on hold class to suggest to the peer channel
+; when this channel places the peer on hold. It may be specified globally or on
+; a per-user or per-peer basis.
+;
+;mohsuggest=default
+;
+;language=en ; Default language setting for all users/peers
+ ; This may also be set for individual users/peers
+;relaxdtmf=yes ; Relax dtmf handling
+;rtptimeout=60 ; Terminate call if 60 seconds of no RTP activity
+ ; when we're not on hold
+;rtpholdtimeout=300 ; Terminate call if 300 seconds of no RTP activity
+ ; when we're on hold (must be > rtptimeout)
+;trustrpid = no ; If Remote-Party-ID should be trusted
+;sendrpid = yes ; If Remote-Party-ID should be sent
+;progressinband=never ; If we should generate in-band ringing always
+ ; use 'never' to never use in-band signalling, even in cases
+ ; where some buggy devices might not render it
+ ; Valid values: yes, no, never Default: never
+;useragent=Asterisk PBX ; Allows you to change the user agent string
+;promiscredir = no ; If yes, allows 302 or REDIR to non-local SIP address
+ ; Note that promiscredir when redirects are made to the
+ ; local system will cause loops since Asterisk is incapable
+ ; of performing a "hairpin" call.
+;usereqphone = no ; If yes, ";user=phone" is added to uri that contains
+ ; a valid phone number
+;dtmfmode = rfc2833 ; Set default dtmfmode for sending DTMF. Default: rfc2833
+ ; Other options:
+ ; info : SIP INFO messages
+ ; inband : Inband audio (requires 64 kbit codec -alaw, ulaw)
+ ; auto : Use rfc2833 if offered, inband otherwise
+
+;compactheaders = yes ; send compact sip headers.
+;
+;videosupport=yes ; Turn on support for SIP video
+;maxcallbitrate=384 ; Maximum bitrate for video calls (default 384 kb/s)
+ ; Videosupport and maxcallbitrate is settable
+ ; for peers and users as well
+;callevents=no ; generate manager events when sip ua
+ ; performs events (e.g. hold)
+;alwaysauthreject = yes ; When an incoming INVITE or REGISTER is to be rejected,
+ ; for any reason, always reject with '401 Unauthorized'
+ ; instead of letting the requester know whether there was
+ ; a matching user or peer for their request
+
+;g726nonstandard = yes ; If the peer negotiates G726-32 audio, use AAL2 packing
+ ; order instead of RFC3551 packing order (this is required
+ ; for Sipura and Grandstream ATAs, among others). This is
+ ; contrary to the RFC3551 specification, the peer _should_
+ ; be negotiating AAL2-G726-32 instead :-(
+
+;
+; If regcontext is specified, Asterisk will dynamically create and destroy a
+; NoOp priority 1 extension for a given peer who registers or unregisters with
+; us and have a "regexten=" configuration item.
+; Multiple contexts may be specified by separating them with '&'. The
+; actual extension is the 'regexten' parameter of the registering peer or its
+; name if 'regexten' is not provided. If more than one context is provided,
+; the context must be specified within regexten by appending the desired
+; context after '@'. More than one regexten may be supplied if they are
+; separated by '&'. Patterns may be used in regexten.
+;
+;regcontext=sipregistrations
+;
+;--------------------------- SIP DEBUGGING ---------------------------------------------------
+;sipdebug = yes ; Turn on SIP debugging by default, from
+ ; the moment the channel loads this configuration
+;recordhistory=yes ; Record SIP history by default
+ ; (see sip history / sip no history)
+;dumphistory=yes ; Dump SIP history at end of SIP dialogue
+ ; SIP history is output to the DEBUG logging channel
+
+
+;--------------------------- STATUS NOTIFICATIONS (SUBSCRIPTIONS) ----------------------------
+; You can subscribe to the status of extensions with a "hint" priority
+; (See extensions.conf.sample for examples)
+; chan_sip support two major formats for notifications: dialog-info and SIMPLE
+; Note: Subscriptions does not work if you have a realtime dialplan and use the
+; realtime switch.
+;
+;allowsubscribe=no ; Disable support for subscriptions. (Default is yes)
+;subscribecontext = default ; Set a specific context for SUBSCRIBE requests
+ ; Useful to limit subscriptions to local extensions
+ ; Settable per peer/user also
+;notifyringing = yes ; Notify subscriptions on RINGING state
+;----------------------------------------- T.38 FAX PASSTHROUGH SUPPORT -----------------------
+;
+; This setting is available in the [general] section as well as in device configurations.
+; Setting this to yes, enables T.38 fax (UDPTL) passthrough on SIP to SIP calls, provided
+; both parties have T38 support enabled in their Asterisk configuration (either general or
+; peer/user/friend sections)
+;
+; t38pt_udptl = yes ; Default false
+;
+;----------------------------------------- OUTBOUND SIP REGISTRATIONS ------------------------
+; Asterisk can register as a SIP user agent to a SIP proxy (provider)
+; Format for the register statement is:
+; register => user[:secret[:authuser]]@host[:port][/extension]
+;
+; If no extension is given, the 's' extension is used. The extension needs to
+; be defined in extensions.conf to be able to accept calls from this SIP proxy
+; (provider).
+;
+; host is either a host name defined in DNS or the name of a section defined
+; below.
+;
+; Examples:
+;
+;register => 1234:password at mysipprovider.com
+;
+; This will pass incoming calls to the 's' extension
+;
+;
+;register => 2345:password at sip_proxy/1234
+;
+; Register 2345 at sip provider 'sip_proxy'. Calls from this provider
+; connect to local extension 1234 in extensions.conf, default context,
+; unless you configure a [sip_proxy] section below, and configure a
+; context.
+; Tip 1: Avoid assigning hostname to a sip.conf section like [provider.com]
+; Tip 2: Use separate type=peer and type=user sections for SIP providers
+; (instead of type=friend) if you have calls in both directions
+
+;registertimeout=20 ; retry registration calls every 20 seconds (default)
+;registerattempts=10 ; Number of registration attempts before we give up
+ ; 0 = continue forever, hammering the other server
+ ; until it accepts the registration
+ ; Default is 0 tries, continue forever
+
+;----------------------------------------- NAT SUPPORT ------------------------
+; The externip, externhost and localnet settings are used if you use Asterisk
+; behind a NAT device to communicate with services on the outside.
+
+;externip = 200.201.202.203 ; Address that we're going to put in outbound SIP
+ ; messages if we're behind a NAT
+
+ ; The externip and localnet is used
+ ; when registering and communicating with other proxies
+ ; that we're registered with
+;externhost=foo.dyndns.net ; Alternatively you can specify an
+ ; external host, and Asterisk will
+ ; perform DNS queries periodically. Not
+ ; recommended for production
+ ; environments! Use externip instead
+;externrefresh=10 ; How often to refresh externhost if
+ ; used
+ ; You may add multiple local networks. A reasonable
+ ; set of defaults are:
+;localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks
+;localnet=10.0.0.0/255.0.0.0 ; Also RFC1918
+;localnet=172.16.0.0/12 ; Another RFC1918 with CIDR notation
+;localnet=169.254.0.0/255.255.0.0 ;Zero conf local network
+
+; The nat= setting is used when Asterisk is on a public IP, communicating with
+; devices hidden behind a NAT device (broadband router). If you have one-way
+; audio problems, you usually have problems with your NAT configuration or your
+; firewall's support of SIP+RTP ports. You configure Asterisk choice of RTP
+; ports for incoming audio in rtp.conf
+;
+;nat=no ; Global NAT settings (Affects all peers and users)
+ ; yes = Always ignore info and assume NAT
+ ; no = Use NAT mode only according to RFC3581
+ ; never = Never attempt NAT mode or RFC3581 support
+ ; route = Assume NAT, don't send rport
+ ; (work around more UNIDEN bugs)
+
+;canreinvite=yes ; Asterisk by default tries to redirect the
+ ; RTP media stream (audio) to go directly from
+ ; the caller to the callee. Some devices do not
+ ; support this (especially if one of them is behind a NAT).
+ ; The default setting is YES. If you have all clients
+ ; behind a NAT, or for some other reason wants Asterisk to
+ ; stay in the audio path, you may want to turn this off.
+
+;canreinvite=nonat ; An additional option is to allow media path redirection
+ ; (reinvite) but only when the peer where the media is being
+ ; sent is known to not be behind a NAT (as the RTP core can
+ ; determine it based on the apparent IP address the media
+ ; arrives from).
+
+;canreinvite=update ; Yet a third option... use UPDATE for media path redirection,
+ ; instead of INVITE. This can be combined with 'nonat', as
+ ; 'canreinvite=update,nonat'. It implies 'yes'.
+
+;----------------------------------------- REALTIME SUPPORT ------------------------
+; For additional information on ARA, the Asterisk Realtime Architecture,
+; please read realtime.txt and extconfig.txt in the /doc directory of the
+; source code.
+;
+;rtcachefriends=yes ; Cache realtime friends by adding them to the internal list
+ ; just like friends added from the config file only on a
+ ; as-needed basis? (yes|no)
+
+;rtsavesysname=yes ; Save systemname in realtime database at registration
+ ; Default= no
+
+;rtupdate=yes ; Send registry updates to database using realtime? (yes|no)
+ ; If set to yes, when a SIP UA registers successfully, the ip address,
+ ; the origination port, the registration period, and the username of
+ ; the UA will be set to database via realtime.
+ ; If not present, defaults to 'yes'.
+;rtautoclear=yes ; Auto-Expire friends created on the fly on the same schedule
+ ; as if it had just registered? (yes|no|<seconds>)
+ ; If set to yes, when the registration expires, the friend will
+ ; vanish from the configuration until requested again. If set
+ ; to an integer, friends expire within this number of seconds
+ ; instead of the registration interval.
+
+;ignoreregexpire=yes ; Enabling this setting has two functions:
+ ;
+ ; For non-realtime peers, when their registration expires, the
+ ; information will _not_ be removed from memory or the Asterisk database
+ ; if you attempt to place a call to the peer, the existing information
+ ; will be used in spite of it having expired
+ ;
+ ; For realtime peers, when the peer is retrieved from realtime storage,
+ ; the registration information will be used regardless of whether
+ ; it has expired or not; if it expires while the realtime peer
+ ; is still in memory (due to caching or other reasons), the
+ ; information will not be removed from realtime storage
+
+;----------------------------------------- SIP DOMAIN SUPPORT ------------------------
+; Incoming INVITE and REFER messages can be matched against a list of 'allowed'
+; domains, each of which can direct the call to a specific context if desired.
+; By default, all domains are accepted and sent to the default context or the
+; context associated with the user/peer placing the call.
+; Domains can be specified using:
+; domain=<domain>[,<context>]
+; Examples:
+; domain=myasterisk.dom
+; domain=customer.com,customer-context
+;
+; In addition, all the 'default' domains associated with a server should be
+; added if incoming request filtering is desired.
+; autodomain=yes
+;
+; To disallow requests for domains not serviced by this server:
+; allowexternaldomains=no
+
+;domain=mydomain.tld,mydomain-incoming
+ ; Add domain and configure incoming context
+ ; for external calls to this domain
+;domain=1.2.3.4 ; Add IP address as local domain
+ ; You can have several "domain" settings
+;allowexternalinvites=no ; Disable INVITE and REFER to non-local domains
+ ; Default is yes
+;autodomain=yes ; Turn this on to have Asterisk add local host
+ ; name and local IP to domain list.
+
+; fromdomain=mydomain.tld ; When making outbound SIP INVITEs to
+ ; non-peers, use your primary domain "identity"
+ ; for From: headers instead of just your IP
+ ; address. This is to be polite and
+ ; it may be a mandatory requirement for some
+ ; destinations which do not have a prior
+ ; account relationship with your server.
+
+;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
+; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
+ ; SIP channel. Defaults to "no". An enabled jitterbuffer will
+ ; be used only if the sending side can create and the receiving
+ ; side can not accept jitter. The SIP channel can accept jitter,
+ ; thus a jitterbuffer on the receive SIP side will be used only
+ ; if it is forced and enabled.
+
+; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a SIP
+ ; channel. Defaults to "no".
+
+; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
+
+; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
+ ; resynchronized. Useful to improve the quality of the voice, with
+ ; big jumps in/broken timestamps, usually sent from exotic devices
+ ; and programs. Defaults to 1000.
+
+; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
+ ; channel. Two implementations are currently available - "fixed"
+ ; (with size always equals to jbmaxsize) and "adaptive" (with
+ ; variable size, actually the new jb of IAX2). Defaults to fixed.
+
+; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
+;-----------------------------------------------------------------------------------
+
+[authentication]
+; Global credentials for outbound calls, i.e. when a proxy challenges your
+; Asterisk server for authentication. These credentials override
+; any credentials in peer/register definition if realm is matched.
+;
+; This way, Asterisk can authenticate for outbound calls to other
+; realms. We match realm on the proxy challenge and pick an set of
+; credentials from this list
+; Syntax:
+; auth = <user>:<secret>@<realm>
+; auth = <user>#<md5secret>@<realm>
+; Example:
+;auth=mark:topsecret at digium.com
+;
+; You may also add auth= statements to [peer] definitions
+; Peer auth= override all other authentication settings if we match on realm
+
+;------------------------------------------------------------------------------
+; Users and peers have different settings available. Friends have all settings,
+; since a friend is both a peer and a user
+;
+; User config options: Peer configuration:
+; -------------------- -------------------
+; context context
+; callingpres callingpres
+; permit permit
+; deny deny
+; secret secret
+; md5secret md5secret
+; dtmfmode dtmfmode
+; canreinvite canreinvite
+; nat nat
+; callgroup callgroup
+; pickupgroup pickupgroup
+; language language
+; allow allow
+; disallow disallow
+; insecure insecure
+; trustrpid trustrpid
+; progressinband progressinband
+; promiscredir promiscredir
+; useclientcode useclientcode
+; accountcode accountcode
+; setvar setvar
+; callerid callerid
+; amaflags amaflags
+; call-limit call-limit
+; allowoverlap allowoverlap
+; allowsubscribe allowsubscribe
+; allowtransfer allowtransfer
+; subscribecontext subscribecontext
+; videosupport videosupport
+; maxcallbitrate maxcallbitrate
+; rfc2833compensate mailbox
+; username
+; template
+; fromdomain
+; regexten
+; fromuser
+; host
+; port
+; qualify
+; defaultip
+; rtptimeout
+; rtpholdtimeout
+; sendrpid
+; outboundproxy
+; rfc2833compensate
+
+;[sip_proxy]
+; For incoming calls only. Example: FWD (Free World Dialup)
+; We match on IP address of the proxy for incoming calls
+; since we can not match on username (caller id)
+;type=peer
+;context=from-fwd
+;host=fwd.pulver.com
+
+;[sip_proxy-out]
+;type=peer ; we only want to call out, not be called
+;secret=guessit
+;username=yourusername ; Authentication user for outbound proxies
+;fromuser=yourusername ; Many SIP providers require this!
+;fromdomain=provider.sip.domain
+;host=box.provider.com
+;usereqphone=yes ; This provider requires ";user=phone" on URI
+;call-limit=5 ; permit only 5 simultaneous outgoing calls to this peer
+;outboundproxy=proxy.provider.domain ; send outbound signaling to this proxy, not directly to the peer
+ ; Call-limits will not be enforced on real-time peers,
+ ; since they are not stored in-memory
+
+;------------------------------------------------------------------------------
+; Definitions of locally connected SIP devices
+;
+; type = user a device that authenticates to us by "from" field to place calls
+; type = peer a device we place calls to or that calls us and we match by host
+; type = friend two configurations (peer+user) in one
+;
+; For device names, we recommend using only a-z, numerics (0-9) and underscore
+;
+; For local phones, type=friend works most of the time
+;
+; If you have one-way audio, you probably have NAT problems.
+; If Asterisk is on a public IP, and the phone is inside of a NAT device
+; you will need to configure nat option for those phones.
+; Also, turn on qualify=yes to keep the nat session open
+
+;[grandstream1]
+;type=friend
+;context=from-sip ; Where to start in the dialplan when this phone calls
+;callerid=John Doe <1234> ; Full caller ID, to override the phones config
+ ; on incoming calls to Asterisk
+;host=192.168.0.23 ; we have a static but private IP address
+ ; No registration allowed
+;nat=no ; there is not NAT between phone and Asterisk
+;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk
+;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone
+;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time
+ ; from the phone to asterisk
+ ; 1 for the explicit peer, 1 for the explicit user,
+ ; remember that a friend equals 1 peer and 1 user in
+ ; memory
+ ; This will affect your subscriptions as well.
+ ; There is no combined call counter for a "friend"
+ ; so there's currently no way in sip.conf to limit
+ ; to one inbound or outbound call per phone. Use
+ ; the group counters in the dial plan for that.
+ ;
+;mailbox=1234 at default ; mailbox 1234 in voicemail context "default"
+;disallow=all ; need to disallow=all before we can use allow=
+;allow=ulaw ; Note: In user sections the order of codecs
+ ; listed with allow= does NOT matter!
+;allow=alaw
+;allow=g723.1 ; Asterisk only supports g723.1 pass-thru!
+;allow=g729 ; Pass-thru only unless g729 license obtained
+;callingpres=allowed_passed_screen ; Set caller ID presentation
+ ; See README.callingpres for more information
+
+
+;[xlite1]
+; Turn off silence suppression in X-Lite ("Transmit Silence"=YES)!
+; Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
+;type=friend
+;regexten=1234 ; When they register, create extension 1234
+;callerid="Jane Smith" <5678>
+;host=dynamic ; This device needs to register
+;nat=yes ; X-Lite is behind a NAT router
+;canreinvite=no ; Typically set to NO if behind NAT
+;disallow=all
+;allow=gsm ; GSM consumes far less bandwidth than ulaw
+;allow=ulaw
+;allow=alaw
+;mailbox=1234 at default,1233 at default ; Subscribe to status of multiple mailboxes
+
+
+;[snom]
+;type=friend ; Friends place calls and receive calls
+;context=from-sip ; Context for incoming calls from this user
+;secret=blah
+;subscribecontext=localextensions ; Only allow SUBSCRIBE for local extensions
+;language=de ; Use German prompts for this user
+;host=dynamic ; This peer register with us
+;dtmfmode=inband ; Choices are inband, rfc2833, or info
+;defaultip=192.168.0.59 ; IP used until peer registers
+;mailbox=1234 at context,2345 ; Mailbox(-es) for message waiting indicator
+;subscribemwi=yes ; Only send notifications if this phone
+ ; subscribes for mailbox notification
+;vmexten=voicemail ; dialplan extension to reach mailbox
+ ; sets the Message-Account in the MWI notify message
+ ; defaults to global vmexten which defaults to "asterisk"
+;disallow=all
+;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw!
+
+
+;[polycom]
+;type=friend ; Friends place calls and receive calls
+;context=from-sip ; Context for incoming calls from this user
+;secret=blahpoly
+;host=dynamic ; This peer register with us
+;dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
+;username=polly ; Username to use in INVITE until peer registers
+ ; Normally you do NOT need to set this parameter
+;disallow=all
+;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw!
+;progressinband=no ; Polycom phones don't work properly with "never"
+
+
+;[pingtel]
+;type=friend
+;secret=blah
+;host=dynamic
+;insecure=port ; Allow matching of peer by IP address without
+ ; matching port number
+;insecure=invite ; Do not require authentication of incoming INVITEs
+;insecure=port,invite ; (both)
+;qualify=1000 ; Consider it down if it's 1 second to reply
+ ; Helps with NAT session
+ ; qualify=yes uses default value
+;
+; Call group and Pickup group should be in the range from 0 to 63
+;
+;callgroup=1,3-4 ; We are in caller groups 1,3,4
+;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5
+;defaultip=192.168.0.60 ; IP address to use if peer has not registered
+;deny=0.0.0.0/0.0.0.0 ; ACL: Control access to this account based on IP address
+;permit=192.168.0.60/255.255.255.0
+
+;[cisco1]
+;type=friend
+;secret=blah
+;qualify=200 ; Qualify peer is no more than 200ms away
+;nat=yes ; This phone may be natted
+ ; Send SIP and RTP to the IP address that packet is
+ ; received from instead of trusting SIP headers
+;host=dynamic ; This device registers with us
+;canreinvite=no ; Asterisk by default tries to redirect the
+ ; RTP media stream (audio) to go directly from
+ ; the caller to the callee. Some devices do not
+ ; support this (especially if one of them is
+ ; behind a NAT).
+;defaultip=192.168.0.4 ; IP address to use until registration
+;username=goran ; Username to use when calling this device before registration
+ ; Normally you do NOT need to set this parameter
+;setvar=CUSTID=5678 ; Channel variable to be set for all calls from this device
+
+;[pre14-asterisk]
+;type=friend
+;secret=digium
+;host=dynamic
+;rfc2833compensate=yes ; Compensate for pre-1.4 DTMF transmission from another Asterisk machine.
+ ; You must have this turned on or DTMF reception will work improperly.
Propchange: team/oej/codename-pineapple/configs/sip3.conf.sample
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: team/oej/codename-pineapple/configs/sip3.conf.sample
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: team/oej/codename-pineapple/configs/sip3.conf.sample
------------------------------------------------------------------------------
svn:mime-type = text/plain
More information about the svn-commits
mailing list