[Asterisk-cvs] zaptel/doc ztcfg.8, NONE, 1.1 ztmonitor.8, NONE, 1.1 zttool.8, NONE, 1.1 ztcfg.8.gz, 1.1, NONE ztcfg.sgml, 1.1, NONE ztmonitor.8.gz, 1.1, NONE ztmonitor.sgml, 1.1, NONE zttool.8.gz, 1.1, NONE zttool.sgml, 1.1, NONE

[kpfleming]

Update of /usr/cvsroot/zaptel/doc
In directory mongoose.digium.com:/tmp/cvs-serv6745/doc

Added Files:
	ztcfg.8 ztmonitor.8 zttool.8 
Removed Files:
	ztcfg.8.gz ztcfg.sgml ztmonitor.8.gz ztmonitor.sgml 
	zttool.8.gz zttool.sgml 
Log Message:
only put uncompressed man pages into source tree (issue #5158)
don't keep SGML sources (troff version is fine)


--- NEW FILE: ztcfg.8 ---
.\" This manpage has been automatically generated by docbook2man 
.\" from a DocBook document.  This tool can be found at:
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
.\" Please send any bug reports, improvements, comments, patches, 
.\" etc. to Steve Cheng <steve at ggi-project.org>.
.TH "ZTCFG" "8" "15 July 2005" "" ""

.SH NAME
ztcfg \- reads and loads zaptel.conf
.SH SYNOPSIS

\fBztcfg\fR [ \fB-c \fICFG_FILE\fB \fR ] [ \fB-s\fR ] [ \fB-t\fR ] [ \fB-v [ -v\fI ...\fB ]\fR ]


\fBztcfg\fR [ \fB-h\fR ]

.SH "DESCRIPTION"
.PP
\fBztcfg\fR configures zaptel interface cards
from a config file.
.PP
You  generally  need to run it with a valid configurations
in order for zaptel modules to work properly.
.SH "OPTIONS"
.TP
\fB-c \fICFG_FILE\fB\fR
Use an alternative configuration file instead of
\fI/etc/zaptel.conf\fR
.TP
\fB-s\fR
Only shutdown spans.
.TP
\fB-t\fR
Test mode. Don't do anything, just report what you
wanted to do.
.TP
\fB-v\fR
Be more verbose. Add extra v-s for extra verbosity.
.TP
\fB-h\fR
Display a brief help about the usage of \fBztcfg\fR
.SH "FILES"
.PP
\fI/etc/zaptel.conf\fR The default location for the configuration file.
.SH "SEE ALSO"
.PP
zttool(8), ztmonitor(8), asterisk(8).
.SH "AUTHOR"
.PP
This manual page was written by Santiago Ruano Rincón <santiago at unicauca.edu.co> for
the Debian system (but may be used by others).  Permission is
granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any 
later version published by the Free Software Foundation.
.PP
On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.

--- NEW FILE: ztmonitor.8 ---
.\" This manpage has been automatically generated by docbook2man 
.\" from a DocBook document.  This tool can be found at:
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
.\" Please send any bug reports, improvements, comments, patches, 
.\" etc. to Steve Cheng <steve at ggi-project.org>.
.TH "ZTMONITOR" "8" "15 July 2005" "" ""

.SH NAME
ztmonitor \- checks the rx/tx levels of the zaptel    inteface cards.
.SH SYNOPSIS

\fBztmonitor \fR \fBchannel number\fR [ \fB-v\fR ] [ \fB-f \fIFILE\fB\fR ]

.SH "DESCRIPTION"
.PP
ztmonitor monitors a zaptel channel. It gives you a visual
representation of the sound strengths and makes it easy to see if
the received or transmitted signals are too high or out of
balance
.SH "OPTIONS"
.PP
The first (mandatory) parameter is the number of the channel
to monitor.
.TP
\fB   -v \fR
Display visual audio levels.
.TP
\fB   -f \fIFILE\fB \fR
Write output to FILE
.SH "SEE ALSO"
.PP
zttool(8), ztcfg(8), asterisk(8).
.SH "AUTHOR"
.PP
This manual page was written by Santiago Ruano Rincón <santiago at unicauca.edu.co> for
the Debian system (but may be used by others).  Permission is
granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any 
later version published by the Free Software Foundation.
.PP
On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.

--- NEW FILE: zttool.8 ---
.\" This manpage has been automatically generated by docbook2man 
.\" from a DocBook document.  This tool can be found at:
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
.\" Please send any bug reports, improvements, comments, patches, 
.\" etc. to Steve Cheng <steve at ggi-project.org>.
.TH "ZTTOOL" "8" "15 July 2005" "" ""

.SH NAME
zttool \- Zaptel Tool shows status of Digium's interface cards.
.SH SYNOPSIS

\fBzttool\fR

.SH "DESCRIPTION"
.PP
zttool shows the current status the Digium Zaptel inteface
cards plugged to the computer.
.PP
It displays values like Current Alarms, SyncSource, Tx/Rx
Levels for each Zaptel interface.
.SH "SEE ALSO"
.PP
ztmonitor(8), asterisk (8).
.SH "AUTHOR"
.PP
This manual page was written by Santiago Ruano Rincón <santiago at unicauca.edu.co> for
the Debian system (but may be used by others).  Permission is
granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any 
later version published by the Free Software Foundation.
.PP
On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.

--- ztcfg.8.gz DELETED ---

--- ztcfg.sgml DELETED ---

--- ztmonitor.8.gz DELETED ---

--- ztmonitor.sgml DELETED ---

--- zttool.8.gz DELETED ---

--- zttool.sgml DELETED ---