[Asterisk-cvs]
asterisk-addons/asterisk-ooh323c/config config.guess, NONE,
1.1 config.sub, NONE, 1.1 depcomp, NONE, 1.1 install-sh, NONE,
1.1 ltmain.sh, NONE, 1.1 missing, NONE, 1.1 mkinstalldirs, NONE, 1.1
vphirke at lists.digium.com
vphirke at lists.digium.com
Mon May 23 16:53:29 CDT 2005
Update of /usr/cvsroot/asterisk-addons/asterisk-ooh323c/config
In directory mongoose.digium.com:/tmp/cvs-serv20293/config
Added Files:
config.guess config.sub depcomp install-sh ltmain.sh missing
mkinstalldirs
Log Message:
Added
--- NEW FILE: config.guess ---
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
timestamp='2003-01-10'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
[...1370 lines suppressed...]
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
UNAME_MACHINE = ${UNAME_MACHINE}
UNAME_RELEASE = ${UNAME_RELEASE}
UNAME_SYSTEM = ${UNAME_SYSTEM}
UNAME_VERSION = ${UNAME_VERSION}
EOF
exit 1
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
--- NEW FILE: config.sub ---
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
timestamp='2003-01-03'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[...1430 lines suppressed...]
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
vendor=atari
;;
-vos*)
vendor=stratus
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
--- NEW FILE: depcomp ---
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. This file always lives in the current directory.
# Also, the AIX compiler puts `$object:' at the start of each line;
# $object doesn't have directory information.
stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
outname="$stripped.o"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d"
tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
tmpdepfile1="$dir$base.o.d"
tmpdepfile2="$dir$base.d"
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a space and a tab in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'. We will use -o /dev/null later,
# however we can't do the remplacement now because
# `-o $object' might simply not be used
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
"$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# X makedepend
shift
cleared=no
for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
-*)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
"$@" || exit $?
IFS=" "
for arg
do
case "$arg" in
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
--- NEW FILE: install-sh ---
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
:
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
:
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
--- NEW FILE: ltmain.sh ---
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
[...5079 lines suppressed...]
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$help" 1>&2
exit 1
;;
esac
echo
$echo "Try \`$modename --help' for more information about other modes."
exit 0
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
--- NEW FILE: missing ---
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1Help2man' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0
--- NEW FILE: mkinstalldirs ---
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman at prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain
errstatus=0
dirmode=""
usage="\
Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
case "${1}" in
-h | --help | --h* ) # -h for help
echo "${usage}" 1>&2; exit 0 ;;
-m ) # -m PERM arg
shift
test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
dirmode="${1}"
shift ;;
-- ) shift; break ;; # stop option processing
-* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
* ) break ;; # first non-opt arg
esac
done
for file
do
if test -d "$file"; then
shift
else
break
fi
done
case $# in
0) exit 0 ;;
esac
case $dirmode in
'')
if mkdir -p -- . 2>/dev/null; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
fi ;;
*)
if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
fi ;;
esac
for file
do
set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
shift
pathcomp=
for d
do
pathcomp="$pathcomp$d"
case "$pathcomp" in
-* ) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp"
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
errstatus=$lasterr
else
if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
lasterr=""
chmod "$dirmode" "$pathcomp" || lasterr=$?
if test ! -z "$lasterr"; then
errstatus=$lasterr
fi
fi
fi
fi
pathcomp="$pathcomp/"
done
done
exit $errstatus
# Local Variables:
# mode: shell-script
# sh-indentation: 3
# End:
# mkinstalldirs ends here
More information about the svn-commits
mailing list