[Asterisk-cvs] asterisk/configs rpt.conf.sample,1.5,1.6
jim at lists.digium.com
jim at lists.digium.com
Wed Jul 14 02:09:09 CDT 2004
Update of /usr/cvsroot/asterisk/configs
In directory mongoose.digium.com:/tmp/cvs-serv21639/configs
Modified Files:
rpt.conf.sample
Log Message:
Made changes to app_rpt.c and rpt.conf, including fully user-definable DTMF
command definitions, and an improved ID methodology.
Index: rpt.conf.sample
===================================================================
RCS file: /usr/cvsroot/asterisk/configs/rpt.conf.sample,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -d -r1.5 -r1.6
--- rpt.conf.sample 27 Jun 2004 20:16:58 -0000 1.5
+++ rpt.conf.sample 14 Jul 2004 05:54:54 -0000 1.6
@@ -7,18 +7,24 @@
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/2 ; Tx audio/signalling channel
+;functions = functions-repeater ; DTMF function list
+;; specify this for a different function list then local when on link
+;;link_functions = functions-different ; DTMF function list for link
;tonezone = us ; use US tones (default)
-;simple = no ; Not in "simple" mode
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
+;funcchar = * ; function lead-in character (defaults to '*')
+;endchar = # ; command mode end character (defaults to '#')
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
-politeid=30000 ; time in milliseconds before ID timer
+;politeid=30000 ; time in milliseconds before ID timer
; expires to try and ID in the tail.
; (optional, default is 30000).
+;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
+;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
@@ -31,14 +37,20 @@
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/4 ; Tx audio/signalling channel
;tonezone = us ; use US tones (default)
-;simple = no ; Not in "simple" mode
;context = default ; dialing context for phone
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
;idrecording = wb6nil ; id recording
;accountcode=RADIO ; account code (optional)
+;funcchar = * ; function lead-in character (defaults to '*')
+;endchar = # ; command mode end character (defaults to '#')
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
;totime=100000 ; transmit time-out time (in ms) (optional)
;idtime=30000 ; id interval time (in ms) (optional)
+;politeid=30000 ; time in milliseconds before ID timer
+ ; expires to try and ID in the tail.
+ ; (optional, default is 30000).
+;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
+;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
;[002] ; Node ID of remote base
@@ -46,26 +58,106 @@
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;txchannel = Zap/6 ; Tx audio/signalling channel
+;functions = functions-remote
;remote = yes
;iobase = 0x378 ; Specify IO port for parallel port (optional)
-[nodes]
+;[functions-repeater]
+;1=ilink,1 ; Specific link disconnect
+;2=ilink,2 ; Specific Link connect - monitor only
+;3=ilink,3 ; Specific Link connect - transceive
+;4=ilink,4 ; Enter command mode on a specific link
+;7=ilink,5 ; Link status
+;;XX=ilink,6 ; Disconnect all links (not used here)
-000 = context_A at 1.2.3.4/1234
-001 = context_B at 5.6.7.8/4321
+;80=status,1 ; System info
+;81=status,2 ; Time
+;82=status,3 ; app_rpt.c Version
+
+;6=autopatchup ; Autopatch up
+;0=autopatchdn ; Autopatch down
+
+;90=cop,1 ; System warm boot
+;91=cop,2 ; System enable
+;92=cop,3 ; System disable
+
+;[functions-remote]
+
+;0=remote,1 ; Retrieve Memory
+;1=remote,2 ; Set freq.
+;2=remote,3 ; Set Rx PL tone.
+;40=remote,100 ; Rx PL off
+;41=remote,101 ; Rx PL on
+;42=remote,102 ; Tx PL off
+;43=remote,103 ; Tx PL on
+;44=remote,104 ; Low Pwr
+;45=remote,105 ; Med Pwr
+;46=remote,106 ; Hi Pwr
+;5=remote,5 ; Status
+
+;[telemetry]
+
+; Telemetry entries are shared across all repeaters
+; Can be a tone sequence, morse string, or a file
+;
+; |t - Tone escape sequence
+;
+; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
+; Single frequencies are created by setting freq1 or freq2 to zero.
+;
+; |m - Morse escape sequence
+;
+; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
+; [morse] section.
+;
+; Follow with an alphanumeric string
+;
+; |i - Morse ID escape sequence
+;
+; Sends Morse code at the ID amplitude and ID frequency as defined in the
+; [morse] section.
+;
+; Follow with an alphanumeric string
+
+
+;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
+;ct2=|t(660,880,150,2048)
+;ct3=|t(440,0,150,2048)
+;ct4=|t(550,0,150,2048)
+;ct5=|t(660,0,150,2048)
+;ct6=|t(880,0,150,2048)
+;ct7=|t(660,440,150,2048)
+;ct8=|t(700,1100,150,2048)
+;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048);
+;remotemon=|t(1600,0,75,2048)
+;cmdmode=|t(900,903,200,2048)
+;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
+
+
+;[morse]
+
+;speed=20 ; Approximate speed in WPM
+;frequency=800 ; Morse Telemetry Frequency
+;amplitude=4096 ; Morse Telemetry Amplitude
+;idfrequency=330 ; Morse ID Frequency
+;idamplitude=2048 ; Morse ID Amplitude
+
+;[nodes]
+
+;000 = context_A at 1.2.3.4/1234
+;001 = context_B at 5.6.7.8/4321
;of course, you can also specify these with domain names, but why rely
;on DNS working unnecessarily?
-[memory]
+;[memory]
-; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
-00 = 146.460,100.0,sht
-; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
-01 = 146.940,100.0,-l
+;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
+;00 = 146.460,100.0,sht
+;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
+;01 = 146.940,100.0,-l
; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes
; Attributes: l=low power, m=medium power, h=high power, -=minus offset,
; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable
-
More information about the svn-commits
mailing list