[Asterisk-cvs] asterisk/configs iaxprov.conf.sample,NONE,1.1

[markster at lists.digium.com]

Update of /usr/cvsroot/asterisk/configs
In directory mongoose.digium.com:/tmp/cvs-serv27291/configs

Added Files:
	iaxprov.conf.sample 
Log Message:
Add IAX provisioning support to Asterisk


--- NEW FILE: iaxprov.conf.sample ---
;
; IAX2 Provisioning Information
;
; Contains provisioning information for templates
; and for specific service entries.
;
; Templates provide a group of settings from which provisioning takes
; place.  A template may be based upon any template that has been
; specified before it.  If the template that an entry is based on is not
; specified then it is presumed to be 'default' (unless it is the first
; of course).  
;
; Templates which begin with 'si-' are used for provisioning 
; units with specific service identifiers.  For example the
; entry "si-000364000126" would be used when the device with the
; corresponding service identifier of "000364000126" attempts
; to register or make a call.
;
[default]
;
; The port number the device should use to bind to.  The default
; is 4569
;
;port=4569
;
; server is our PRIMARY server for registration and placing calls
;
;server=192.168.69.3
;
; altserver is the BACKUP server for registration and placing calls
; in the event the primary server is unavailable.
;
;altserver=192.168.69.4
;
; port is the port number to use for IAX2 outbound.  The 
; connections to the server and altserver -- default is of course
; 4569.
;serverport=4569
;
; language is the preferred language for the device
;
;language=en
;
; codec is the requested codec.  The iaxy supports ulaw and adpcm
;
codec=ulaw
;
; flags is a comma separated list of flags which the device should
; use and may contain any of the following keywords:
;
;  "register"  - Register with server
;  "secure"    - Do not accept calls / provisioning not originated by the server
;  "heartbeat" - Generate status packets on port 9999 sent to 255.255.255.255
;  "debug"     - Output extra debugging to port 9999
;
;  Note that use can use += and -= to adjust parameters
;
flags=register,heartbeat
;
; tos is the requested type of service setting and may be one a number or
; 'lowdelay','throughput','reliability','mincost' or 'none'
;
tos=lowdelay
;
; Example iaxy provisioning
;
;[si-000364000126]
;user=iaxy
;pass=bitsy
;flags += debug

;[si-000364000127]
;user=iaxy2
;pass=bitsy2
;template=si-000364000126
;flags += debug

;
;[*]
;
;  If specified, the '*' provisioning is used for all devices which do
;  not have another provisioning entry within the file.  If unspecified, no
;  provisioning will take place for devices which have no entry.  DO NOT
;  USE A '*' PROVISIONING ENTRY UNLESS YOU KNOW WHAT YOU'RE DOING.
;
;template=default