[libpri-commits] russell: tag 1.4.11 r1713 - in /tags/1.4.11: .version ChangeLog
SVN commits to the libpri project
libpri-commits at lists.digium.com
Thu May 20 14:32:34 CDT 2010
Author: russell
Date: Thu May 20 14:32:32 2010
New Revision: 1713
URL: http://svnview.digium.com/svn/libpri?view=rev&rev=1713
Log:
Importing files for 1.4.11 release.
Added:
tags/1.4.11/.version (with props)
tags/1.4.11/ChangeLog (with props)
Added: tags/1.4.11/.version
URL: http://svnview.digium.com/svn/libpri/tags/1.4.11/.version?view=auto&rev=1713
==============================================================================
--- tags/1.4.11/.version (added)
+++ tags/1.4.11/.version Thu May 20 14:32:32 2010
@@ -1,0 +1,1 @@
+1.4.11
Propchange: tags/1.4.11/.version
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: tags/1.4.11/.version
------------------------------------------------------------------------------
svn:keywords = none
Propchange: tags/1.4.11/.version
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: tags/1.4.11/ChangeLog
URL: http://svnview.digium.com/svn/libpri/tags/1.4.11/ChangeLog?view=auto&rev=1713
==============================================================================
--- tags/1.4.11/ChangeLog (added)
+++ tags/1.4.11/ChangeLog Thu May 20 14:32:32 2010
@@ -1,0 +1,1093 @@
+2010-05-20 Russell Bryant <russell at digium.com>
+
+ * libpri 1.4.11 released.
+
+2010-05-19 21:50 +0000 [r1703] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: T309 should not do anything with the global call
+ reference call record.
+
+2010-05-19 21:30 +0000 [r1702] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: It's amazing what a tiny bug in the Q.921 SDL diagram can
+ do to cause trouble.... Fix issue where V_R was not reset and N_R
+ was consequentially transmitted incorrectly. Particularly in
+ layer 2 initiated re-establishments.
+
+2010-05-11 22:14 +0000 [r1688] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: Dialing an invalid
+ extension causes incomplete hangup sequence. Revision -r1489
+ corrected a deviation from Q.931 Section 5.3.2. However, this
+ resulted in an unexpected behaviour change to the upper layer
+ (Asterisk). This change restores the legacy hangup behaviour if
+ the new API call is not used. Use pri_hangup_fix_enable() to
+ follow Q.931 Section 5.3.2 call hangup better. (closes issue
+ #17104) Reported by: shawkris Tested by: rmudgett
+
+2010-04-26 19:54 +0000 [r1664-1675] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Simplified some protocol discriminator handling code.
+
+ * q931.c: Garbage on the end of Q.931 messages causing calls to
+ fail to connect. The DAHDI driver had a bug where an extra byte
+ appeared on the end of Q.931 messages. This garbage byte caused
+ the message to be discarded with the diagnostic "XXX Message
+ longer than it should be?? XXX". The Q.931 message will no longer
+ be discarded if there were earlier ie's in the message. This
+ patch also addresses the potential problem of reading beyond the
+ buffer when trying to parse the garbage data. Thanks to roeften
+ for the base patch. (closes issue #14378) Reported by: timking
+
+ * q921.c: Avoid using a cast.
+
+ * q931.c: Cleanup some pri debug output line presentation.
+
+2010-04-19 22:40 +0000 [r1625-1630] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_internal.h, pri_q931.h, q931.c, pridump.c: PTMP NT mode call
+ reference value ambiguity. Since the TE side can pick CR values
+ independently, the TE CR needs to be qualified by TEI to
+ distinguish CR values from other devices. Without doing this,
+ multiple phones on the BRI line will have intermittent call
+ failures. JIRA LIBPRI-30 Also eliminated some wierdness in
+ q931_status() and several places where it is called.
+
+ * q921.c: Fix potential crash when pridump.c calls q921_dump() with
+ NULL pri ptr.
+
+2010-04-15 18:43 +0000 [r1596] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h: Make some internal routines available to
+ other libpri components.
+
+2010-04-09 21:43 +0000 [r1577] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Only one PROCEEDING message per call please.
+
+2010-03-18 15:50 +0000 [r1534-1547] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Move a comment closer to where it has relevance.
+
+ * pri.c, pri_internal.h, q921.c, q931.c, pri_facility.c:
+ Miscellaneous simple reorganization. 1) Make PRI_MASTER() no
+ longer check for a NULL parameter. It is the caller's
+ responsibility. Not many callers could have passed a NULL without
+ crashing before or after anyway. 2) Replace calls to
+ q931_is_ptmp() with PTMP_MODE(). They were equivalent. 3) Made
+ the following boolean config options bit fields: sendfacility,
+ overlapdial, chan_mapping_logical, and service_message_support.
+
+2010-03-02 23:47 +0000 [r1511] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, q921.c: Restore ability to change the
+ Q.921 K value. The Q.921 rewrite only used value of PRI_TIMER_K
+ right after it was set to the default. The Q.921 window size was
+ thus no longer alterable by the user. (closes issue #16909)
+ Reported by: alecdavis Patches: pritimer.libpri.diff.txt uploaded
+ by alecdavis (license 585) Tested by: alecdavis
+
+2010-02-11 21:47 +0000 [r1488-1489] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Must send DISCONNECT if we have sent a response to a
+ SETUP message. Q.931 Section 5.3.2 a) says we send a
+ RELEASE_COMPLETE to reject a call SETUP if we have not already
+ sent a message in response to the SETUP message.
+
+ * pri.c, libpri.h: Minor comment changes.
+
+2010-02-11 17:35 +0000 [r1482] Wendell Thompson <wthompson at digium.com>
+
+ * Makefile: Added CPUARCH option for selecting a 32-bit build from
+ the command line.
+
+2010-02-08 23:29 +0000 [r1470-1476] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Revert useless check of pri->t200_timer value, since
+ scheduler routines check the value anyways.
+
+ * q921.c: Make sure we set the l3initiated flag when PTP links are
+ attempted to be re-established
+
+2010-02-05 23:34 +0000 [r1464] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c: pri_restart() is no longer needed since the Q.921 rewrite.
+ Don't output error message for a deprecated function.
+
+2010-01-29 21:55 +0000 [r1457] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Sense of statement was inverted from what it should have
+ been. Might have caused false T200 operation on reception of
+ I-frames.
+
+2010-01-29 19:32 +0000 [r1451] Richard Mudgett <rmudgett at digium.com>
+
+ * q921.c: Only set eres if there actually is an event to pass up.
+ (issue 16713)
+
+2010-01-29 17:27 +0000 [r1445] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Fix bug in which an event was lost if an I-frame was
+ received during a timer recovery state (related to #16713)
+
+2010-01-26 21:04 +0000 [r1439] Richard Mudgett <rmudgett at digium.com>
+
+ * q921.c: Don't be so noisy when D channel is down.
+
+2010-01-19 21:53 +0000 [r1426] Richard Mudgett <rmudgett at digium.com>
+
+ * q921.c, q931.c: Fix TE PTMP side sending FACILITY messages on the
+ dummy call reference. Only the NT PTMP side can send Q.931
+ broadcast messages. Also removed an inaccurate comment in Q.921
+ and made q921_mdl_handle_error_callback() call the correct struct
+ pri free function.
+
+2010-01-15 18:28 +0000 [r1414] Richard Mudgett <rmudgett at digium.com>
+
+ * q921.c, q931.c: Make some debugging messages conditional and some
+ minor reformating changes.
+
+2010-01-13 19:37 +0000 [r1406] Matthew Fredrickson <creslin at digium.com>
+
+ * pri.c, pri_internal.h, pri_q921.h, Makefile, pri_q931.h, q921.c,
+ q931.c: Merge of Q.921 rewrite branch for wider testing.
+
+2009-12-09 20:59 +0000 [r1374] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Extracted q931_fill_ring_event() from
+ post_handle_q931_message(). Done so it is easier to see what was
+ done in ccbs branch.
+
+2009-11-21 02:40 +0000 [r1345-1351] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h: Fix debug output so built up output lines
+ are readable again. A recent change to Asterisk put the span
+ number at the begining of each line. This is a good thing if you
+ need to debug multiple spans or forget which span you are
+ debugging. Unfortunately, any pri_message() output that is not a
+ complete line is messed up. The pri_message() function now will
+ accumulate line output until a '\n' is seen on the end.
+
+ * pri_internal.h, q931.c, pri_facility.c: Delay processing of
+ facility ie's after all other ie's are processed. * Some ROSE
+ message processing depends on the presence of other ies. The
+ DivertingLegInformation1, and 3 messages will be used as the
+ default connected line number if the connected number ie is not
+ present. The redirecting number ie is used as a default to the
+ redirecting number in the DivertingLegInformation2 message if the
+ ROSE message does not contain it and the redirecting number ie is
+ present. * Some ROSE message processing depends upon other ie
+ values. The StatusRequest, CCBS-T-Call, and CcRingout messages
+ collectively need the BC, HLC, LLC, called number, called
+ subaddress, calling number, and calling subaddress ie information
+ to be available.
+
+2009-11-18 00:36 +0000 [r1331] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Merged revision 1328 from
+ https://origsvn.digium.com/svn/libpri/team/mattf/libpri-1.4-q921-rewrite
+ .......... r1328 | mattf | 2009-11-17 15:16:11 -0600 (Tue, 17 Nov
+ 2009) | 1 line outboundbroadcast isn't set at this time, since it
+ is set after the message is transmited, so we must use other
+ criteria to determine the need for broadcast on a setup
+ ..........
+
+2009-11-14 00:20 +0000 [r1310-1322] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, q931.c, pri_facility.c, pri_facility.h,
+ libpri.h: Reimplement callback mechanism to handle APDU response
+ messages that we care about. 1) No sent messages will remain in
+ the APDU queue unless they have an active timer to remove them.
+ The dummy call reference call and global call reference call
+ structures will not act like a memory leak to sent messages. 2)
+ The new T-RESPONSE timer will be the generic response guard if
+ the standards do not otherwise specify a timer for a message
+ response. 3) The callback will be called. If it is called because
+ of a response message, then the callback has an opportunity to
+ indicate if more responses are expected.
+
+ * libpri.h: We now have 32 timers. No need to reserve minimum space
+ anymore.
+
+ * pri_internal.h, pri_facility.c: There must be only one source for
+ the invoke id values per D channel group. If there are
+ potentially multiple sources for the invoke id sequence then we
+ could get confused if there are multiple outstanding messages
+ with the same invoke id that get responses.
+
+2009-11-11 00:22 +0000 [r1291] Matthew Fredrickson <creslin at digium.com>
+
+ * pri_internal.h, q921.c: Make sure we also revive links for PRIs,
+ not just PTMP TE BRIs when we get a disconnect message
+
+2009-11-10 21:51 +0000 [r1283] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_internal.h, q931.c, pri_facility.c, pri_facility.h: The
+ facility ie queue needs to remove facilities that have been sent.
+ The facility ie queue needs to remove facilities that have been
+ sent. Otherwise, the queue just grows until the call is
+ terminated. AOC messages can clog the queue during a long call
+ and the dummy call reference may never be deleted. Also removed
+ unneeded elements of struct apdu_event. The callback function was
+ not a good idea since many facility messages do not have
+ responses and the callback would prevents removal of events from
+ the list.
+
+2009-11-10 20:25 +0000 [r1276] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Re-add back in support for TE initiated layer 2
+ activation
+
+2009-11-10 19:27 +0000 [r1268-1275] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: Add dummy call reference
+ support. Fixes problem where PTMP NT mode responds erroneously to
+ a FACILITY message from a phone on the dummy call reference.
+ LibPRI behaved as if the dummy call reference were an invalid
+ call reference and proceeded to respond on the global call
+ reference.
+
+ * pri_internal.h: Remove unused callingsubaddr[].
+
+2009-11-03 17:19 +0000 [r1255-1261] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_q931.h, q931.c: Unknown IE 50 (cs5, Unknown Information
+ Element) Add code to recognize the code set 5 ie 50 (calling
+ party category) to suppress the unknown IE message. (closes issue
+ #13828) Reported by: fdecher Patches:
+ libpri_ie50_cs5-trunk.diff3.txt uploaded by alecdavis (license
+ 585) Tested by: alecdavis
+
+ * q931.c: NT PTMP did not report busy when calling a busy phone.
+ The caller would not get a busy indication when calling a busy
+ phone. Timer T303 is not supposed to be stopped when
+ RELEASE_COMPLETE received. When T303 expires we will now report
+ the last clearing cause code to the caller if we received one.
+
+2009-10-23 23:47 +0000 [r1242-1249] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_internal.h, pri_facility.c: Add subaddress handling to
+ existing messages and functions. Connected line updates when
+ transfering calls does not completely support subaddresses yet.
+
+ * pri.c, pri_internal.h, pri_q921.h, pri_q931.h, q921.c, q931.c,
+ pri_facility.c, pri_facility.h, libpri.h: Add BRI PTMP NT mode,
+ HOLD/RETRIEVE, Call rerouting/deflection, and keypad facility
+ support. * Added support for BRI PTMP NT mode. (Overlap dialing
+ NT -> TE not supported.) * Added handling of received
+ HOLD/RETRIEVE messages and the optional ability to transfer a
+ held call on disconnect similar to an analog phone. * Added
+ CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI
+ PTMP. Will reroute/deflect an outgoing call when receive the
+ message. Can use the DAHDISendCallreroutingFacility to send the
+ message for the supported switches. * Added ability to
+ send/receive keypad digits in the SETUP message. Send keypad
+ digits in SETUP message:
+ Dial(DAHDI/g1[/K<keypad_digits>][/extension]) Access any received
+ keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
+ (closes issue #15048) Tested by: rmudgett, mattf
+
+2009-10-22 16:16 +0000 [r1230] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, pri_q931.h, q931.c, libpri.h: Add support
+ for calling and called subaddress. Partial support for COLP
+ subaddress. The Telecom Specs in NZ suggests that SUB ADDRESS is
+ always on, so doing "desk to desk" between offices each with an
+ asterisk box over the ISDN should then be possible, without a
+ whole load of DDI numbers required. (closes issue #15604)
+ Reported by: alecdavis Patches: libpri_subaddr_trunk.diff11.txt
+ uploaded by alecdavis (license 585) Some minor modificatons were
+ made. Tested by: alecdavis, rmudgett Review:
+ https://reviewboard.asterisk.org/r/406/
+
+2009-10-19 22:49 +0000 [r1219-1220] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Fix call state ie transmission. Sending a STATUS message
+ failed to include the call state ie for some reason. We will now
+ always send a call state ie when a message ie list includes one.
+
+ * q931.c: Fix comparision of invalid party name and number structs
+ in comparison functions.
+
+2009-10-15 22:34 +0000 [r1212] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Take diverted-to-number from DivLegInfo1 and use
+ it as connected number. If no connected number is signaled in the
+ CONNECT message we will use the last diverted to number. (issue
+ #14292) Reported by: tomaso Patches:
+ divleginfo1_to_connectednum.patch uploaded by tomaso (license
+ 564) (Used as a guide since it no longer will apply.) (This patch
+ is unrelated to the issue.)
+
+2009-10-14 19:03 +0000 [r1191-1205] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: In q931_getcall(): Simplify test and add related switch
+ types.
+
+ * q931.c: Reduce future conflicts when adding ie's to the SETUP
+ message.
+
+2009-10-12 17:17 +0000 [r1177] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c, pri_internal.h, pri_q931.h, q931.c, pri_facility.c:
+ Miscellaneous changes: * Removed unnecessary
+ Q931_IE_CONNECTED_NUM ie from setup_ack_ies[]. * Added internal
+ state Q931_CALL_STATE_NOT_SET to Q.931 state enum. * Made
+ q931_is_ptmp() take a const pointer. * pri_facility.c: Some
+ preparations for subaddressing. * pri.c: Eliminate use of a magic
+ number.
+
+2009-10-09 23:20 +0000 [r1169] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Conditional out noisy and redundant ASN.1 parse dump of
+ facility ie contents. 1) Outgoing messages have the facility ie
+ ASN.1 decoded and dumped when the ie is added to the message. The
+ whole message is then dumped. 2) Incoming messages have the
+ facility ie ASN.1 decoded and dumped when the ie is processed.
+ The whole message has already been dumped.
+
+2009-10-07 18:34 +0000 [r1151-1152] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Sent Q.SIG call rerouting message fixes. a)
+ Account for pSS1InfoElement where the bearer capability for the
+ new rerouted call is described. The call could be a fax or data
+ call, let's use the appropriate signaling to avoid call rejects
+ on the other end. b) Handle calling number appropriately, number
+ can be prohibited or non-existent. c) Add calling name if
+ available. d) Use the diversion counter from DivLegInfo2 (if was
+ present in the incoming Setup) and increment. (issue #14292)
+ Reported by: tomaso Patches:
+ libpri-1.4-2009-01-29-rerouting-0.1.9.patch uploaded by tomaso
+ (license 564) (Used as a guide since it no longer will apply.)
+ (This patch is unrelated to the issue.)
+
+ * pri.c, pri_q921.h, q921.c: Merged revisions 1143, 1144 from
+ https://origsvn.digium.com/svn/libpri/tags/1.4.10.2 ..........
+ r1144 | mattf | 2009-09-29 10:32:23 -0500 (Tue, 29 Sep 2009) | 1
+ line This fix is more like the fix that was used to resolve the
+ issue for the PRI case .......... r1143 | mattf | 2009-09-28
+ 14:07:01 -0500 (Mon, 28 Sep 2009) | 1 line Changes for 1.4.10.2
+ ..........
+
+2009-09-22 17:12 +0000 [r1120] Jeff Peeler <jpeeler at digium.com>
+
+ * q931.c: Fix call reference to be associated with the D channel
+ message was received The problem is that once a call reference
+ was associated with a particular D channel, it always was. This
+ created an issue with NFAS when the secondary D channel became
+ active as the messages were still being sent on the non-active D
+ channel. (closes issue #14959) Reported by: remiq Patches:
+ bug14959.patch uploaded by jpeeler (license 325) Tested by: remiq
+
+2009-09-22 02:23 +0000 [r1107] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c: Update pri_event2str() to current defined events.
+
+2009-09-18 00:31 +0000 [r1097] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Another place where timeout events with subcmds should
+ clear any old subcmds.
+
+2009-09-15 22:24 +0000 [r1084] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Timeout events with subcmds should clear any old subcmds.
+
+2009-09-14 22:32 +0000 [r1077] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Output multiline output with multiple calls to
+ pri_message, so that logs look normal in Asterisk
+
+2009-09-13 22:54 +0000 [r1072] Dwayne M. Hubbard <dwayne.hubbard at gmail.com>
+
+ * pri_q931.h, q931.c: Add SERVICE message support for the
+ 'national' switchtype This set of changes integrates SERVICE
+ message support for the 'national' switchtype. The 'national'
+ switchtype uses the 0x43 protocol discriminator. The 'national'
+ SERVICE/SERVICE ACKNOWLEDGE and AT&T SERVICE/SERVICE ACKNOWLEDGE
+ message values are opposite of each other. This is handled by
+ first determining which protocol discriminator is in use, then
+ responding with the appropriate SERVICE ACKNOWLEDGE value. AT&T
+ SERVICE messages use the 0x3 protocol discriminator. (closes
+ issue #15803) Reported by: dhubbard Review:
+ https://reviewboard.asterisk.org/r/347/
+
+2009-09-02 20:19 +0000 [r1059-1061] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_internal.h, pri_q931.h, q931.c: Converted Q931_CALL_STATE_xxx
+ defines to an enum.
+
+ * q921.c, q931.c: Optimized calls to pri_schedule_del(). There is
+ no need to test if a scheduled event is running before calling
+ pri_schedule_del().
+
+ * prisched.c: Cleaned up scheduled events handling code. * Fixed
+ pri_schedule_event() to return 0 on error instead of -1. Zero is
+ a safer value to return. Users would not think that a timer was
+ scheduled. * Fixed potential for pri_schedule_del() to write out
+ of bounds of pri_sched[]. The out of bounds access could occur
+ when pri_schedule_event() returned -1. * Made use all pri_sched[]
+ entries. pri_sched[0] was previously unused. * Removed some
+ unneeded code and recursion since scheduling only runs on master
+ D channel structures. * Added doxygen comments. * Renamed struct
+ pri *pri variables to struct pri *ctrl in this file.
+
+2009-08-31 22:57 +0000 [r1042-1051] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c, libpri.h: Make event channel parameter encoding
+ consistent. Also make sure that service maintenance messages have
+ the channel id parameters reinitialized for each message since
+ they are sent over the global call reference.
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: Split justsignalling
+ into cis_call and cis_auto_disconnect functionality.
+
+2009-08-26 15:24 +0000 [r1006-1028] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Fix BRI PTP broken by -r790.
+
+ * q931.c: Put connected name in display ie for CONNECT message.
+
+ * q931.c: Fix ie ordering in some ie lists for send_message().
+
+ * q931.c: Make dump_channel_id() handle variable length fields.
+ Also did some other minor miscellaneous changes.
+
+ * q931.c: Make sure reversecharge is initialized.
+
+2009-08-21 19:51 +0000 [r1000] Jason Parker <jparker at digium.com>
+
+ * Makefile: Add -n to ldconfig on HURD too. (closes issue #15130)
+ Reported by: tzafrir Patches: osarch_hurd.diff uploaded by
+ tzafrir (license 46)
+
+2009-08-20 15:52 +0000 [r994] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Made the call state to string table use the state
+ defines.
+
+2009-08-18 23:53 +0000 [r982] Richard Mudgett <rmudgett at digium.com>
+
+ * rose.c, rosetest.c, rose_internal.h, pri.c, pri_internal.h,
+ Makefile, q931.c, rose.h, rose_etsi_diversion.c (added),
+ pri_facility.c, pri_facility.h, libpri.h, rose_etsi_ect.c
+ (added): Add COLP support to libpri for ETSI PTP, ETSI PTMP, and
+ Q.SIG. Add Connected Line Presentation (COLP) support to
+ chan_dahdi/libpri as an addition to issue 8824. This is the
+ libpri portion. COLP support is now available for ETSI PTP, ETSI
+ PTMP, and Q.SIG with this patch. (closes issue #14068) Tested by:
+ rmudgett Review: https://reviewboard.asterisk.org/r/339/
+
+2009-08-18 20:59 +0000 [r976] Jeff Peeler <jpeeler at digium.com>
+
+ * Makefile: Allow custom CPU optimization flags Added make variable
+ LIBPRI_OPT to set optimization level. By default the optimization
+ level is now set to -O2. (closes issue #12676) Reported by:
+ tzafrir Patches: libpri_opt.diff uploaded by tzafrir (license 46)
+
+2009-08-07 15:53 +0000 [r968] Richard Mudgett <rmudgett at digium.com>
+
+ * rose_qsig_diversion.c: Corrected standard document reference.
+
+2009-07-23 20:53 +0000 [r952] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Fixed potential NULL pointer dereference.
+
+2009-06-26 19:50 +0000 [r914-921] Richard Mudgett <rmudgett at digium.com>
+
+ * pri.c: Fix potential buffer overflow in pri_dump_info_str(). *
+ Created pri_snprintf() to prevent buffer overflow in
+ pri_dump_info_str(). * Extracted timer name to timer number table
+ from pri_timer2idx() so pri_dump_info_str() can use it.
+
+ * pri_internal.h: Eliminate local version of PRI_MAX_TIMERS.
+
+ * libpri.h: Doxygenify the timer comments.
+
+ * pri_internal.h, q931.c: Added printf format attribute to
+ pri_message() and pri_error() and fixed some detected errors.
+
+2009-06-25 18:53 +0000 [r907] Sean Bright <sean at malleable.com>
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: Add support for sending
+ Reverse Charging Indication IE on ISDN PRI. Add the ability to
+ transmit a Reverse Charging Indication IE during a SETUP message.
+ In passing, re-work some of the receive logic to be forwards
+ compatible with new RCI values that may be added in the future.
+ Also removed the PRI_REVERSECHARGE_SUPPORT define that I added on
+ the last commit since we can just check for
+ PRI_REVERSECHARGE_NONE or _REQUESTED on the Asterisk side to
+ determine support for this. Special thanks to rmudgett who could
+ have written this in half the time he spent reviewing it, but
+ instead talked me through it. Much appreciated! (issue #13760)
+ Reported by: mrgabu Review:
+ https://reviewboard.asterisk.org/r/292/
+
+2009-06-25 17:35 +0000 [r894-901] Richard Mudgett <rmudgett at digium.com>
+
+ * libpri.h: Convert PRI_TIMER_xxx to an enum so PRI_MAX_TIMERS can
+ be automatically adjusted.
+
+ * pri.c, pri_timers.h (removed), libpri.h: Make it easier to add
+ more timers/counters and vary the defaults based upon switchtype.
+
+2009-06-24 18:19 +0000 [r878-885] Sean Bright <sean at malleable.com>
+
+ * pri_internal.h, q931.c, libpri.h: Capture and expose the Reverse
+ Charging Indication IE on ISDN PRI. (issue #13760) Reported by:
+ mrgabu Patches: 20090619_libpri_1.4.patch uploaded by seanbright
+ (license 71) Tested by: seanbright, pruonckk Review:
+ https://reviewboard.asterisk.org/r/291/
+
+ * pri_internal.h, q931.c, libpri.h: Revert unintentional changes
+
+ * pri_internal.h, q931.c, /, libpri.h: Set reviewboard property.
+
+2009-06-12 14:29 +0000 [r865] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Miscellaneous minor changes.
+
+2009-06-09 19:47 +0000 [r859] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: There are two changes in this commit that are bug fixes
+ for various Q.921 issues found in internal testing. Both were
+ exposed/introduced by the TBR4 compliance patch for bug #12861,
+ in changing how retransmissions and in how the transmission queue
+ was maintained. TX-RX message flow and acknowledgement was
+ severely restricted, since the patch changed the behavior so that
+ pending untransmitted frames would not actually be send until the
+ next RR was received in normal circumstances, or REJ when a
+ reject frame was received. On busy links, this can severly limit
+ the amount of useful traffic that is sent, and can slow down
+ message transmission. Until someone can point out where in Q.921
+ it is mandated for us to wait for RR frames to start sending
+ untransmitted messages, the first change is to allow us to send
+ untransmitted frames when we receive new I frames as well, with
+ updated N(R). The other bug fixed is a situation caused by the
+ restricted traffic flow, if an outside process tries to send an
+ I-frame asynchronous to an RR frame, when the transmit window was
+ previously closed and then opened up but an RR has not been
+ received yet. A bug was found with the integration of the old
+ transmit code with the new reject handling code which caused the
+ new frame to be sent immediately, regardless if there were any
+ pending untransmitted I-frames in the queue to be sent and
+ causing an out of order I-frame to be sent to the other side.
+ This bug is also fixed in this patch.
+
+2009-06-03 22:51 +0000 [r836-848] Richard Mudgett <rmudgett at digium.com>
+
+ * asn1_primitive.c: Made ASN.1 memory dump also display printable
+ characters.
+
+ * q931.c: Renamed callstate2str() to q931_call_state_str().
+
+ * q931.c: Made transmit_facility() debug message indiate to which
+ message the facility ie is being added.
+
+2009-05-29 15:39 +0000 [r824] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Renamed local struct pri *pri variables to struct pri
+ *ctrl in q931.c. The context tagging for my editor is much
+ happier now that the struct and the variable do not have the same
+ name. (At least for this file.)
+
+2009-05-20 15:03 +0000 [r804] Richard Mudgett <rmudgett at digium.com>
+
+ * q931.c: Removed usage of FUNC_DUMP(), FUNC_RECV(), and
+ FUNC_SEND() defines. They did not really help and hindered easy
+ lookup of parameter types.
+
+2009-05-13 15:17 +0000 [r798] Kevin P. Fleming <kpfleming at digium.com>
+
+ * pri.c, pri_q931.h, q931.c, libpri.h: Add 'const' qualifier to
+ character string argument to keypad facility API calls These API
+ calls do not modify the string supplied, and should not be
+ allowed to modify it, so this patch adds a 'const' qualifier to
+ that argument to allow the compiler to enforce this restriction
+ (and allow callers of the API that already have a 'const' pointer
+ to be able to pass it to this API).
+
+2009-05-07 16:21 +0000 [r790-794] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_internal.h, pri_q931.h, q931.c: Minor code clean up.
+
+ * q931.c: Avoid a stale pointer crash if the TE BRI TEI is removed
+ when active calls exist. Made the q931_call record point to the
+ master D channel control structure instead of the BRI TEI
+ subchannel control structure. When a layer 3 message is sent, the
+ current TEI subchannel control structure is used.
+
+2009-05-05 22:25 +0000 [r786] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_q931.h: Added Q.931 call state description comments.
+
+2009-05-01 22:47 +0000 [r782] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_q931.h, q921.c: Comment changes.
+
+2009-04-21 23:32 +0000 [r766-772] Richard Mudgett <rmudgett at digium.com>
+
+ * rose.c, rosetest.c, rose_internal.h, Makefile, rose.h,
+ rose_qsig_aoc.c (added), pri_facility.c: Added Q.SIG
+ Advice-Of-Charge encode/decode routines.
+
+ * asn1_primitive.c (added), pri_internal.h, rose_qsig_name.c
+ (added), Makefile, q931.c, asn1.h (added), rose_qsig_mwi.c
+ (added), rose.c (added), rosetest.c (added), rose_internal.h
+ (added), rose_other.c (added), rose.h (added), rose_address.c
+ (added), rose_qsig_diversion.c (added), rose_etsi_aoc.c (added),
+ pri_facility.c, rose_qsig_ct.c (added), pri_facility.h,
+ rose_q931.c (added), libpri.h: ROSE ASN.1 facility encode and
+ decode rewrite of existing messages. Several components are now
+ parsed correctly. Most notably: PartyNumber and Q.SIG Name.
+
+2009-04-14 15:05 +0000 [r732] Jeff Peeler <jpeeler at digium.com>
+
+ * pri.c, pri_internal.h, pri_q921.h, pri_q931.h, q921.c, q931.c,
+ libpri.h: Add service maintenance message support This adds
+ support for two new message types: Service and Service
+ Acknowledge. When a channel receives a service message it will
+ either take the channel in or out of service and then send a
+ service acknowledgment. Although not enforced here (enforced in
+ chan_dahdi), the service messages are only supported with switch
+ types 4ess/5ess. The required Asterisk changes will be coming
+ next. (issue #3450) Reported by: cmaj
+
+2009-04-02 19:33 +0000 [r726] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Comment changes and some string content
+ corrections.
+
+2009-04-18 Matthew Fredrickson <creslin at digium.com>
+
+ * libpri 1.4.10 released.
+
+2009-04-02 19:33 +0000 [r726] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Comment changes and some string content
+ corrections.
+
+2009-03-26 16:01 +0000 [r715] Richard Mudgett <rmudgett at digium.com>
+
+ * libpri.h: Comment changes to note what ISDN message type causes
+ the event.
+
+2009-03-19 01:39 +0000 [r711] Richard Mudgett <rmudgett at digium.com>
+
+ * pri_facility.c: Added pSS1InfoElement comments in
+ qsig_cf_callrerouting().
+
+2009-03-13 01:05 +0000 [r705] Richard Mudgett <rmudgett at digium.com>
+
+ * build_tools/make_version: Use the correct branch integrated
+ property when generating the version string. Update the
+ make_version file to the latest Asterisk version with the
+ appropriate libpri required chage.
+
+2009-03-04 20:31 +0000 [r701] Joshua Colp <jcolp at digium.com>
+
+ * q931.c: Make sure we only have 4 octects on unrestricted 64k data
+ calls. (closes issue #14507) Reported by: jsmith Patches:
+ 64k-data.patch uploaded by jsmith (license 15) Tested by: jsmith
+ (closes issue #13118) Reported by: radpeter
+
+2009-02-02 20:18 +0000 [r687] Leif Madsen <lmadsen at digium.com>
+
+ * libpri.h: Fix a small spelling error. (closes issue #14375)
+ Reported by: jeremy1
+
+2009-01-27 23:22 +0000 [r680] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: A couple of last BRI fixes in libpri... don't discard
+ pending iframes when we call the q921_dchannel_up routine, since
+ we need to be able to send the ones that were queued up while the
+ D-channel went down and is being reactivated. Also fix some buggy
+ logic in the frame transmission decision code.
+
+2009-01-22 21:48 +0000 [r675] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Change behavior so that we do not send I-frames when link
+ is down, but instead queue them up until the link comes up and
+ send them out then.
+
+2009-01-09 Matthew Fredrickson <creslin at digium.com>
+
+ * libpri 1.4.9 released.
+
+2009-01-09 17:58 +0000 [r656] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Add additional case where T200 expires greater than N200
+ times and we need to release and reacquire the TEI.
+
+2008-12-23 21:38 +0000 [r653] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c, q931.c: Add some additional debug for Q.921 MDL messages
+ as well as fix a bug in RESTART messages on BRI
+
+2008-11-22 Matthew Fredrickson <creslin at digium.com>
+
+ * libpri 1.4.8 released.
+
+2008-11-22 00:34 +0000 [r645] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Fix a number of Q.921 bugs, found doing TBR4 compliance
+ testing, thanks to Tzafrir, Xorcom, and co. (#12861). Thanks!
+
+2008-10-17 16:13 +0000 [r636] Matthew Fredrickson <creslin at digium.com>
+
+ * pri.c, pri_internal.h, pri_q931.h, q931.c, pri_facility.c,
+ pri_facility.h, libpri.h: Merging in additional Q.SIG features in
+ #13454. Includes Q.SIG physical/logical channel mapping support,
+ extended coding of Q.SIG name operations (calling name), and call
+ rerouting support via added dialplan application.
+
+2008-08-06 18:20 +0000 [r616] Jason Parker <jparker at digium.com>
+
+ * Makefile: Make install paths use libdir, like libss7
+
+2008-08-05 Kevin P. Fleming <kpfleming at digium.com>
+
+ * libpri 1.4.7 released.
+
+2008-08-05 22:18 +0000 [r611] Kevin P. Fleming <kpfleming at digium.com>
+
+ * pritest.c, pri.c, pri_internal.h, q921.c, q931.c, copy_string.c,
+ prisched.c, pri_q921.h, pri_q931.h, pri_facility.c, /,
+ compiler.h, pridump.c, testprilib.c, pri_timers.h,
+ pri_facility.h, libpri.h: Merged revisions 610 via svnmerge from
+ https://origsvn.digium.com/svn/libpri/branches/1.2 ........ r610
+ | kpfleming | 2008-08-05 17:16:58 -0500 (Tue, 05 Aug 2008) | 2
+ lines clean up license headers, and explicitly grant additional
+ permissions when used with Asterisk ........
+
+2008-07-30 15:43 +0000 [r606-607] Kevin P. Fleming <kpfleming at digium.com>
+
+ * /: update ignore list
+
+ * Makefile, mkdep (removed): use better version.c creation process,
+ and better dependency tracking process too
+
+2008-07-29 22:47 +0000 [r598-602] Jason Parker <jparker at digium.com>
+
+ * build_tools/make_version: I believe this is what was meant. (it
+ matches how Asterisk does it)
+
+ * build_tools/make_version: libpri is not libss7 :D
+
+2008-07-22 22:36 +0000 [r594] Kevin P. Fleming <kpfleming at digium.com>
+
+ * pri_internal.h, libpri.h: correct comments to match code
+
+2008-07-22 Kevin P. Fleming <kpfleming at digium.com>
+
+ * Libpri 1.4.6 released.
+
+2008-07-22 19:43 +0000 [r589] Kevin P. Fleming <kpfleming at digium.com>
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: rename API call and
+ option (nothing has been released to use it yet so this should be
+ safe) to be more accurate in describing what it does (closes
+ issue #13042)
+
+2008-07-11 Jason Parker <jparker at digium.com>
+
+ * Libpri 1.4.5 released.
+
+2008-07-11 16:44 +0000 [r574-579] Kevin P. Fleming <kpfleming at digium.com>
+
+ * /: ignore generated files
+
+ * pri.c, pri_internal.h, q931.c, libpri.h: modify work done for
+ issue #10552, making the support of inband audio after RELEASE a
+ configurable option, since it is causing problems for a number of
+ users (closes issue #13042)
+
+2008-06-04 17:02 +0000 [r562] Dwayne M. Hubbard <dhubbard at digium.com>
+
+ * q931.c: While working on issue 3450 I noticed that the
+ information channel selection field in the channel identification
+ IE was displayed incorrectly when using 'pri intense debug'. I
+ wanted another pair of eyes to look at the code because
+ everything looked correct until Shaun Ruffell noticed the missing
+ comma in the msg_chan_sel array.
+
+2008-05-07 19:51 +0000 [r557] Matthew Fredrickson <creslin at digium.com>
+
+ * pri.c, pritest.c, pri_internal.h, pri_q921.h, Makefile, q921.c,
+ q931.c, pri_facility.c, prisched.c, testprilib.c, pri_timers.h,
+ pri_facility.h, libpri.h: Moving trunk changes back into 1.4
+
+2008-05-07 Matthew Fredrickson <creslin at digium.com>
+
+ * Libpri 1.4.4 released.
+
+2008-05-06 16:43 +0000 [r553-555] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c, pri.c: Remove some unnecessary debug messages
+
+ * q931.c: We passed TBR3 layer 2 and layer 3 testing with this
+ commit in for BRI-TE PTMP.
+
+ * q931.c: Final patch to pass certification
+
+2008-04-22 15:30 +0000 [r546] Russell Bryant <russell at digium.com>
+
+ * Makefile: All versions of libpri have been installed as
+ libpri.so.1.0, even though the API and ABI have changed over
+ time. This patch changes the Makefile to install the library as
+ libpri.so.1.4 to indicate that this is not compatible with
+ previous versions. In the future, this should be changed as we
+ make ABI changes. (closes issue #10376) Reported by: tzafrir
+ Patches: libpri-soname.diff uploaded by tzafrir (license 46) --
+ with very minor changes by me
+
+2008-03-15 19:57 +0000 [r541-543] Matthew Fredrickson <creslin at digium.com>
+
+ * libpri.h, pri.c: Remove some useless event items
+
+ * q921.c, pri_internal.h: Make sure if we're a bri and in PTMP mode
+ that we release the TEI and try to get a new one with the other
+ end when we lose activity in multiframe mode
+
+ * q921.c, pri.c, pri_q921.h: When we recieve a UA in any TEI
+ established state other than awaiting establishement make sure we
+ drop the TEI and get a new one. For passing tests PC37.2 - PC41.2
+ in Q.921
+
+2008-03-06 23:43 +0000 [r538-539] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Make sure we are sending as command not as response
+
+ * q921.c: Make sure C/R bit is correct
+
+2008-03-01 23:30 +0000 [r531-535] Matthew Fredrickson <creslin at digium.com>
+
+ * q921.c: Remove some (currently) useless code
+
+ * q921.c, pri.c, pri_internal.h: Some more updates to add code for
+ passing PC 27.1 in Q.921
+
+ * q921.c, pri.c: Various coding style cleanups as well as a bug fix
+ for TEI removal
+
+ * q921.c, q931.c, pri.c, pri_internal.h: Initial checkin of code to
[... 234 lines stripped ...]
More information about the libpri-commits
mailing list