[dahdi-commits] dahdi/tools.git branch "master" updated.

[SVN commits to the DAHDI project]

branch "master" has been updated
       via  e4197cc4991eeb99246b50d70b1fedc978214e22 (commit)
       via  abd139ae910f22b9764fc763c9a65fb620b2e42b (commit)
      from  6b2c6d72d8e3c0763623416b6a27d9b27cdefd8b (commit)

Summary of changes:
 xpp/README.Astribank |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)


- Log -----------------------------------------------------------------
commit e4197cc4991eeb99246b50d70b1fedc978214e22
Author: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
Date:   Tue Mar 21 18:45:19 2017 +0200

    xpp: README: libusb1
    
    Signed-off-by: Tzafrir Cohen <tzafrir.cohen at xorcom.com>

diff --git a/xpp/README.Astribank b/xpp/README.Astribank
index 6a3bf7a..32cb5e7 100644
--- a/xpp/README.Astribank
+++ b/xpp/README.Astribank
@@ -47,9 +47,9 @@ Apart from the standard DAHDI build requirements, you also need:
 
 * *libusb development headers* to build the Astribank firmware tools
   (astribank_tool, astribank_hexload, astribank_allow).
-  This is typically the package libusb-dev on Debian (and derivatives
-  like Ubuntu) or libusb-devel on RedHat (and derivatives like
-  CentOS/Trixbox).
+  This is typically the package libusb-1.0-0-dev on Debian (and
+  derivatives such as Ubuntu) or libusbx-devel on RedHat (and derivatives
+  such as CentOS).
 * *Echo Canceller Module firmware*: If you have an Astribank with an
   echo canceller module, see the following section.
 

commit abd139ae910f22b9764fc763c9a65fb620b2e42b
Author: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
Date:   Tue Mar 21 17:53:01 2017 +0200

    xpp: README: hwid attribute of the xpd sysfs node
    
    Signed-off-by: Tzafrir Cohen <tzafrir.cohen at xorcom.com>

diff --git a/xpp/README.Astribank b/xpp/README.Astribank
index e71bcb7..6a3bf7a 100644
--- a/xpp/README.Astribank
+++ b/xpp/README.Astribank
@@ -1488,6 +1488,9 @@ other side.
 current. That is: which ones are connected to an active FXS on the
 other side.
 
+===== /sys/bus/astribanks/devices/xbus-NN/NN:M:P/hwid
+Prints <module type>.<module subtype>. Both are small numbers.
+
 ===== /sys/bus/astribanks/devices/xbus-NN/NN:M:P/offhook
 Shows ports that are (1) or are not (0) off-hook. When a channel is
 not off-hook. For BRI and E1/T1 the value is 1 if the span is in use.

-----------------------------------------------------------------------


-- 
dahdi/tools.git