[dahdi-commits] sruffell: linux/trunk r10696 - /linux/trunk/drivers/dahdi/wcte12xp/
SVN commits to the DAHDI project
dahdi-commits at lists.digium.com
Fri Jun 22 12:59:38 CDT 2012
Author: sruffell
Date: Fri Jun 22 12:59:37 2012
New Revision: 10696
URL: http://svnview.digium.com/svn/dahdi?view=rev&rev=10696
Log:
wcte12xp: Allow default_linemode to be set to j1.
To enable J1 mode previously one would configure the card in T1 mode and then
set the j1mode module parameter. Now "modprobe wcte12xp default_linemode=j1"
will work like the other linemodes globally for all cards manged by this driver.
J1 can also be set on a card-by-card basis in sysfs.
Also move pr_fmt to top of file so pr_xxx macros print the module name as
intended.
Signed-off-by: Shaun Ruffell <sruffell at digium.com>
Modified:
linux/trunk/drivers/dahdi/wcte12xp/base.c
linux/trunk/drivers/dahdi/wcte12xp/wcte12xp.h
Modified: linux/trunk/drivers/dahdi/wcte12xp/base.c
URL: http://svnview.digium.com/svn/dahdi/linux/trunk/drivers/dahdi/wcte12xp/base.c?view=diff&rev=10696&r1=10695&r2=10696
==============================================================================
--- linux/trunk/drivers/dahdi/wcte12xp/base.c (original)
+++ linux/trunk/drivers/dahdi/wcte12xp/base.c Fri Jun 22 12:59:37 2012
@@ -27,6 +27,8 @@
* this program for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
@@ -55,18 +57,14 @@
#error VOICEBUS_SFRAME_SIZE != SFRAME_SIZE
#endif
-#ifndef pr_fmt
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#endif
-
static int debug;
-static int j1mode = 0;
+static int j1mode = -1;
static int alarmdebounce = 2500; /* LOF/LFA def to 2.5s AT&T TR54016*/
static int losalarmdebounce = 2500; /* LOS def to 2.5s AT&T TR54016*/
static int aisalarmdebounce = 2500; /* AIS(blue) def to 2.5s AT&T TR54016*/
static int yelalarmdebounce = 500; /* RAI(yellow) def to 0.5s AT&T devguide */
static int t1e1override = -1; /* deprecated */
-static char *default_linemode = "auto"; /* 'auto', 'e1', or 't1' */
+static char *default_linemode = "auto"; /* 'auto', 'e1', 't1', or 'j1' */
static int latency = VOICEBUS_DEFAULT_LATENCY;
static unsigned int max_latency = VOICEBUS_DEFAULT_MAXLATENCY;
static int vpmsupport = 1;
@@ -883,7 +881,8 @@
fmr1 = 0x9e; /* FMR1: Mode 0, T1 mode, CRC on for ESF, 2.048 Mhz system data rate, no XAIS */
fmr2 = 0x20; /* FMR2: no payload loopback, don't auto yellow alarm */
- if (j1mode)
+
+ if (SPANTYPE_DIGITAL_J1 == wc->span.spantype)
fmr4 = 0x1c;
else
fmr4 = 0x0c; /* FMR4: Lose sync on 2 out of 5 framing bits, auto resync */
@@ -923,7 +922,7 @@
t1_setreg(wc, 0x38, 0x0a); /* PCD: LOS after 176 consecutive "zeros" */
t1_setreg(wc, 0x39, 0x15); /* PCR: 22 "ones" clear LOS */
- if (j1mode)
+ if (SPANTYPE_DIGITAL_J1 == wc->span.spantype)
t1_setreg(wc, 0x24, 0x80); /* J1 overide */
/* Generate pulse mask for T1 */
@@ -1846,18 +1845,32 @@
memset(chans, 0, sizeof(chans));
memset(ec, 0, sizeof(ec));
- if (type == E1) {
+ switch (type) {
+ case E1:
wc->span.channels = 31;
wc->span.spantype = SPANTYPE_DIGITAL_E1;
wc->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_HDB3 |
DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4;
wc->span.deflaw = DAHDI_LAW_ALAW;
- } else {
+ break;
+ case T1:
wc->span.channels = 24;
wc->span.spantype = SPANTYPE_DIGITAL_T1;
wc->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS |
DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF;
wc->span.deflaw = DAHDI_LAW_MULAW;
+ break;
+ case J1:
+ wc->span.channels = 24;
+ wc->span.spantype = SPANTYPE_DIGITAL_J1;
+ wc->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS |
+ DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF;
+ wc->span.deflaw = DAHDI_LAW_MULAW;
+ break;
+ default:
+ spin_unlock_irqrestore(&wc->reglock, flags);
+ res = -EINVAL;
+ goto error_exit;
}
spin_unlock_irqrestore(&wc->reglock, flags);
@@ -1866,7 +1879,7 @@
return -ENOMEM;
t1_info(wc, "Setting up global serial parameters for %s\n",
- (dahdi_is_e1_span(&wc->span) ? "E1" : "T1"));
+ dahdi_spantype2str(wc->span.spantype));
t4_serial_setup(wc);
set_bit(DAHDI_FLAGBIT_RBS, &wc->span.flags);
@@ -1923,17 +1936,25 @@
switch (linemode) {
case SPANTYPE_DIGITAL_T1:
dev_info(&wc->vb.pdev->dev,
- "Changing from E1 to T1 line mode.\n");
+ "Changing from %s to T1 line mode.\n",
+ dahdi_spantype2str(wc->span.spantype));
res = t1_software_init(wc, T1);
break;
case SPANTYPE_DIGITAL_E1:
dev_info(&wc->vb.pdev->dev,
- "Changing from T1 to E1 line mode.\n");
+ "Changing from %s to E1 line mode.\n",
+ dahdi_spantype2str(wc->span.spantype));
res = t1_software_init(wc, E1);
break;
+ case SPANTYPE_DIGITAL_J1:
+ dev_info(&wc->vb.pdev->dev,
+ "Changing from %s to E1 line mode.\n",
+ dahdi_spantype2str(wc->span.spantype));
+ res = t1_software_init(wc, J1);
default:
dev_err(&wc->vb.pdev->dev,
- "Got invalid linemode %d from dahdi\n", linemode);
+ "Got invalid linemode '%s' from dahdi\n",
+ dahdi_spantype2str(linemode));
res = -EINVAL;
}
@@ -1970,14 +1991,15 @@
int x;
/* T1 or E1 */
- if (-1 != t1e1override) {
- pr_info("t1e1override is deprecated. Please use 'default_linemode'.\n");
- *type = (t1e1override) ? E1 : T1;
+ if ((-1 != t1e1override) || (-1 != j1mode)) {
+ *type = (t1e1override) ? E1 : (j1mode) ? J1 : T1;
} else {
if (!strcasecmp(default_linemode, "e1")) {
*type = E1;
} else if (!strcasecmp(default_linemode, "t1")) {
*type = T1;
+ } else if (!strcasecmp(default_linemode, "j1")) {
+ *type = J1;
} else {
u8 pins;
res = t1_getpins(wc, &pins);
@@ -1986,7 +2008,8 @@
*type = (pins & 0x01) ? T1 : E1;
}
}
- debug_printk(wc, 1, "linemode: %s\n", (*type == T1) ? "T1" : "E1");
+ debug_printk(wc, 1, "linemode: %s\n", (*type == T1) ? "T1" :
+ (J1 == *type) ? "J1" : "E1");
/* what version of the FALC are we using? */
reg = t1_setreg(wc, 0x4a, 0xaa);
@@ -2925,13 +2948,18 @@
if (!cmd_cache)
return -ENOMEM;
- if (-1 != t1e1override) {
- pr_info("'t1e1override' is deprecated. "
- "Please use 'default_linemode' instead\n");
+ if ((-1 != t1e1override) || (-1 != j1mode)) {
+ pr_info("'t1e1override' and 'j1mode' are deprecated. "
+ "Please use 'default_linemode' instead.\n");
+ /* If someone is setting j1mode, then, t1e1override most likely
+ * needs to be forced to t1 mode */
+ if (j1mode > 0)
+ t1e1override = 0;
} else if (strcasecmp(default_linemode, "auto") &&
strcasecmp(default_linemode, "t1") &&
+ strcasecmp(default_linemode, "j1") &&
strcasecmp(default_linemode, "e1")) {
- pr_err("'%s' is an unknown span type.", default_linemode);
+ pr_err("'%s' is an unknown span type.\n", default_linemode);
default_linemode = "auto";
kmem_cache_destroy(cmd_cache);
return -EINVAL;
Modified: linux/trunk/drivers/dahdi/wcte12xp/wcte12xp.h
URL: http://svnview.digium.com/svn/dahdi/linux/trunk/drivers/dahdi/wcte12xp/wcte12xp.h?view=diff&rev=10696&r1=10695&r2=10696
==============================================================================
--- linux/trunk/drivers/dahdi/wcte12xp/wcte12xp.h (original)
+++ linux/trunk/drivers/dahdi/wcte12xp/wcte12xp.h Fri Jun 22 12:59:37 2012
@@ -77,6 +77,7 @@
enum linemode {
T1 = 1,
E1,
+ J1,
};
struct command {
More information about the dahdi-commits
mailing list