[dahdi-commits] sruffell: tools/trunk r4860 - in /tools/trunk: Makefile UPGRADE.txt

[SVN commits to the DAHDI project]

Author: sruffell
Date: Thu Sep  4 11:37:21 2008
New Revision: 4860

URL: http://svn.digium.com/view/dahdi?view=rev&rev=4860
Log:
* Updates the instructions presented after 'make config' about where to set
  which modules are loaded.

* Update UPGRADE.txt to indicate where to set which modules are loaded and
  where the module parameters are set.

Issue# DAHDI-187

Modified:
    tools/trunk/Makefile
    tools/trunk/UPGRADE.txt

Modified: tools/trunk/Makefile
URL: http://svn.digium.com/view/dahdi/tools/trunk/Makefile?view=diff&rev=4860&r1=4859&r2=4860
==============================================================================
--- tools/trunk/Makefile (original)
+++ tools/trunk/Makefile Thu Sep  4 11:37:21 2008
@@ -276,9 +276,10 @@
 endif
 	@echo "DAHDI has been configured."
 	@echo ""
-	@echo "If you have any DAHDI hardware it is now recommended to "
-	@echo "edit /etc/dahdi/init.conf and set there an optimal value "
-	@echo "for the variable MODULES ."
+	@echo "If you have any DAHDI hardware it is now recommended you "
+	@echo "edit /etc/dahdi/modules in order to oad support for only "
+	@echo "the DAHDI hardware installed in this system . By default "
+	@echo "support for all DAHDI hardware is loaded at DAHDI start. "
 	@echo ""
 	@echo "I think that the DAHDI hardware you have on your system is:"
 	@xpp/dahdi_hardware || true

Modified: tools/trunk/UPGRADE.txt
URL: http://svn.digium.com/view/dahdi/tools/trunk/UPGRADE.txt?view=diff&rev=4860&r1=4859&r2=4860
==============================================================================
--- tools/trunk/UPGRADE.txt (original)
+++ tools/trunk/UPGRADE.txt Thu Sep  4 11:37:21 2008
@@ -96,3 +96,8 @@
 * In Astribank PRI modules, the LED behaviour represents which ports
   are *CLOCK MASTER* (red color) and which are *CLOCK SLAVE* (green color).
   Usually (but not always), this corresponds to the NT/TE settings in Asterisk.
+
+* The /etc/sysconfig/zaptel (or /etc/default/zaptel file, depending
+  on your distribution) is now split into two separate files:
+  /etc/dahdi/modules control which modules are loaded and module options are
+  set via /etc/modprobe.d/dahdi.