[dahdi-commits] tzafrir: tools/trunk r4460 - in /tools/trunk: ./ doc/ xpp/
SVN commits to the DAHDI project
dahdi-commits at lists.digium.com
Wed Jun 25 04:16:52 CDT 2008
Author: tzafrir
Date: Wed Jun 25 04:16:51 2008
New Revision: 4460
URL: http://svn.digium.com/view/dahdi?view=rev&rev=4460
Log:
* dahdi.conf -> /etc/dahdi/system.conf in the tools this time.
* Kill some remaining zaptel strings.
Modified:
tools/trunk/Makefile
tools/trunk/dahdi_monitor.c
tools/trunk/doc/dahdi_cfg.8
tools/trunk/xpp/genzaptelconf
tools/trunk/xpp/genzaptelconf.8
Modified: tools/trunk/Makefile
URL: http://svn.digium.com/view/dahdi/tools/trunk/Makefile?view=diff&rev=4460&r1=4459&r2=4460
==============================================================================
--- tools/trunk/Makefile (original)
+++ tools/trunk/Makefile Wed Jun 25 04:16:51 2008
@@ -180,12 +180,12 @@
print (($$1 eq "country")? "* $$2\t":"$$2\n");' $< \
>$@
-dahdi.conf.asciidoc: dahdi.conf.sample
+system.conf.asciidoc: system.conf.sample
perl -n -e \
'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print " $$_" }' \
$< >$@
-README.html: README dahdi.conf.asciidoc tonezones.txt
+README.html: README system.conf.asciidoc tonezones.txt
$(ASCIIDOC) -n -a toc -a toclevels=3 $<
kernel/xpp/README.Astribank.html: kernel/xpp/README.Astribank
@@ -223,7 +223,7 @@
# install -m 644 $(MAN_PAGES) $(DESTDIR)$(MAN_DIR)/
endif
ifeq (,$(wildcard $(DESTDIR)$(CONFIG_FILE)))
-# $(INSTALL) -D -m 644 dahdi.conf.sample $(DESTDIR)$(CONFIG_FILE)
+# $(INSTALL) -D -m 644 system.conf.sample $(DESTDIR)$(CONFIG_FILE)
endif
install-libs: libs
@@ -305,7 +305,7 @@
rm -f core
rm -f dahdi_cfg-shared fxstest
rm -rf $(GROFF_HTML)
- rm -rf README.html xpp/README.Astribank.html dahdi.conf.asciidoc
+ rm -rf README.html xpp/README.Astribank.html system.conf.asciidoc
distclean: dist-clean
Modified: tools/trunk/dahdi_monitor.c
URL: http://svn.digium.com/view/dahdi/tools/trunk/dahdi_monitor.c?view=diff&rev=4460&r1=4459&r2=4460
==============================================================================
--- tools/trunk/dahdi_monitor.c (original)
+++ tools/trunk/dahdi_monitor.c Wed Jun 25 04:16:51 2008
@@ -284,7 +284,7 @@
struct dahdi_confinfo zc;
if ((argc < 2) || (atoi(argv[1]) < 1)) {
- fprintf(stderr, "Usage: ztmonitor <channel num> [-v[v]] [-m] [-o] [-p] [-l limit] [-f FILE | -s FILE | -r FILE1 -t FILE2] [-F FILE | -S FILE | -R FILE1 -T FILE2]\n");
+ fprintf(stderr, "Usage: dahdi_monitor <channel num> [-v[v]] [-m] [-o] [-p] [-l limit] [-f FILE | -s FILE | -r FILE1 -t FILE2] [-F FILE | -S FILE | -R FILE1 -T FILE2]\n");
fprintf(stderr, "Options:\n");
fprintf(stderr, " -v: Visual mode. Implies -m.\n");
fprintf(stderr, " -vv: Visual/Verbose mode. Implies -m.\n");
@@ -302,15 +302,15 @@
fprintf(stderr, " -S FILE: Save pre-echocanceled stereo rx/tx stream to FILE. Implies -p.\n");
fprintf(stderr, "Examples:\n");
fprintf(stderr, "Save a stream to a file\n");
- fprintf(stderr, " ztmonitor 1 -f stream.raw\n");
+ fprintf(stderr, " dahdi_monitor 1 -f stream.raw\n");
fprintf(stderr, "Visualize an rx/tx stream and save them to separate files.\n");
- fprintf(stderr, " ztmonitor 1 -v -r streamrx.raw -t streamtx.raw\n");
+ fprintf(stderr, " dahdi_monitor 1 -v -r streamrx.raw -t streamtx.raw\n");
fprintf(stderr, "Play a combined rx/tx stream via OSS and save it to a file\n");
- fprintf(stderr, " ztmonitor 1 -o -f stream.raw\n");
+ fprintf(stderr, " dahdi_monitor 1 -o -f stream.raw\n");
fprintf(stderr, "Save a combined normal rx/tx stream and a combined 'preecho' rx/tx stream to files\n");
- fprintf(stderr, " ztmonitor 1 -p -f stream.raw -F streampreecho.raw\n");
+ fprintf(stderr, " dahdi_monitor 1 -p -f stream.raw -F streampreecho.raw\n");
fprintf(stderr, "Save a normal rx/tx stream and a 'preecho' rx/tx stream to separate files\n");
- fprintf(stderr, " ztmonitor 1 -m -p -r streamrx.raw -t streamtx.raw -R streampreechorx.raw -T streampreechotx.raw\n");
+ fprintf(stderr, " dahdi_monitor 1 -m -p -r streamrx.raw -t streamtx.raw -R streampreechorx.raw -T streampreechotx.raw\n");
exit(1);
}
@@ -483,7 +483,7 @@
if (visual) {
printf("\nVisual Audio Levels.\n");
printf("--------------------\n");
- printf(" Use dahdi.conf file to adjust the gains if needed.\n\n");
+ printf(" Use /etc/dahdi/system.conf file to adjust the gains if needed.\n\n");
printf("( # = Audio Level * = Max Audio Hit )\n");
draw_barheader();
}
Modified: tools/trunk/doc/dahdi_cfg.8
URL: http://svn.digium.com/view/dahdi/tools/trunk/doc/dahdi_cfg.8?view=diff&rev=4460&r1=4459&r2=4460
==============================================================================
--- tools/trunk/doc/dahdi_cfg.8 (original)
+++ tools/trunk/doc/dahdi_cfg.8 Wed Jun 25 04:16:51 2008
@@ -1,7 +1,7 @@
.TH "DAHDI_CFG" "8" "16 Jun 2008" "" ""
.SH NAME
-dahdi_cfg \- configures dahdi kernel modules from dahdi.conf
+dahdi_cfg \- configures dahdi kernel modules from /etc/dahdi/system.conf
.SH SYNOPSIS
.B dahdi_cfg [-c \fICFG_FILE\fB] [-s] [-f] [-t] [-v [-v ... ] ]
@@ -23,7 +23,7 @@
.B -c \fICFG_FILE
.RS
Use an alternative configuration file instead of
-.I /etc/dahdi.conf
+.I /etc/dahdi/system.conf
.RE
.B -s
@@ -53,7 +53,7 @@
.SH FILES
-.I /etc/dahdi.conf
+.I /etc/dahdi/system.conf
.RS
The default location for the configuration file.
.RE
Modified: tools/trunk/xpp/genzaptelconf
URL: http://svn.digium.com/view/dahdi/tools/trunk/xpp/genzaptelconf?view=diff&rev=4460&r1=4459&r2=4460
==============================================================================
--- tools/trunk/xpp/genzaptelconf (original)
+++ tools/trunk/xpp/genzaptelconf Wed Jun 25 04:16:51 2008
@@ -1,7 +1,7 @@
#! /bin/bash
# genzaptelconf: generate as smartly as you can:
-# /etc/dahdi.conf
+# /etc/dahdi/system.conf
# /etc/asterisk/zapata-channels.conf (to be #include-d into zapata.conf)
# update:
# With '-M' /etc/modules (list of modules to load)
@@ -56,7 +56,7 @@
# Set fxs_immediate to 'yes' to make all FXS lines answer immediately.
fxs_immediate=no
-ZAPCONF_FILE=${ZAPCONF_FILE:-/etc/dahdi.conf}
+ZAPCONF_FILE=${ZAPCONF_FILE:-/etc/dahdi/system.conf}
ZAPCONF_FILE_SYSTEM=$ZAPCONF_FILE
ZAPATA_FILE=${ZAPATA_FILE:-/etc/asterisk/zapata-channels.conf}
ZAPSCAN_FILE=${ZAPSCAN_FILE:-/etc/asterisk/zapscan.conf}
@@ -68,10 +68,10 @@
exten_defs_file=/etc/asterisk/extensions-defs.conf
# perl utilities:
xpp_sync=/usr/sbin/xpp_sync
-zt_registration=/usr/sbin/zt_registration
+dahdi_registration=/usr/sbin/dahdi_registration
# how long to wait for /dev/zap/ctl to appear? (seconds)
DEVZAP_TIMEOUT=${DEVZAP_TIMEOUT:-20}
-ZTCFG=${ZTCFG:-/sbin/ztcfg}
+DAHDI_CFG=${DAHDI_CFG:-/sbin/dahdi_cfg}
# BRI/PRI spans will be in an additional per-span group whose number
# is SPAN_GROUP_BASE + span-number
SPAN_GROUP_BASE=10
@@ -115,13 +115,13 @@
if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi
if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi
-if [ ! -x "$ZTCFG" ]; then
- # Work around a bug in the rpm package: ztcfg should be in
+if [ ! -x "$DAHDI_CFG" ]; then
+ # Work around a bug in the rpm package: dahdi_cfg should be in
# /sbin as it may be required for starting a network interface
- if [ -x /usr/sbin/ztcfg ]; then
- ZTCFG=/usr/sbin/ztcfg
+ if [ -x /usr/sbin/dahdi_cfg ]; then
+ DAHDI_CFG=/usr/sbin/dahdi_cfg
else
- echo >&2 "ztcfg is not on found, do you have dahdi properly installed?"
+ echo >&2 "dahdi_cfg is not on found, do you have dahdi properly installed?"
exit_cleanup 1
fi
fi
@@ -129,7 +129,7 @@
XPP_SYNC=auto # sync mode. can be set to '0' or '1' or HOST explicitly.
# it is safe to use -c twice: the last one will be used.
-ztcfg_cmd="$ZTCFG -c $ZAPCONF_FILE"
+dahdi_cfg_cmd="$DAHDI_CFG -c $ZAPCONF_FILE"
# work around a bug (that was already fixed) in the installer:
if [ "$lc_country" = '' ]; then lc_country=us; fi
@@ -194,17 +194,17 @@
done
if [ "$devzap_found" != 1 ]; then
say "Still no /dev/zap/ctl after $devzap_timeout seconds."
- echo >&2 "No /dev/zap/ctl: cannot run ztcfg. Aborting."
- fi
-}
-
-run_ztcfg() {
- # Run ztcfg itself
+ echo >&2 "No /dev/zap/ctl: cannot run dahdi_cfg. Aborting."
+ fi
+}
+
+run_dahdi_cfg() {
+ # Run dahdi_cfg itself
if [ "$verbose" = no ]; then
- $ztcfg_cmd "$@"
+ $dahdi_cfg_cmd "$@"
else
say "Reconfiguring identified channels"
- $ztcfg_cmd -vv "$@"
+ $dahdi_cfg_cmd -vv "$@"
fi
}
@@ -258,7 +258,7 @@
# this will be the case if you set the parameter zap_autoreg=0 to
# the module xpp
# Append /dev/null to provide a valid file name in case of an empty pattern.
- xbusses_pattern=`echo $xbusses| sed -e 's|XBUS-[0-9]*|/proc/xpp/&/XPD-*/zt_registration|g'`' /dev/null'
+ xbusses_pattern=`echo $xbusses| sed -e 's|XBUS-[0-9]*|/proc/xpp/&/XPD-*/dahdi_registration|g'`' /dev/null'
xpds_to_register=`grep -l 0 $xbusses_pattern`
for file in $xpds_to_register; do
echo 1 >$file
@@ -278,9 +278,9 @@
# overriding locales for the above two, as perl can be noisy
# when locales are missing.
# No register all the devices if they didn't auto-register:
- LC_ALL=C $zt_registration on
-
- # this one could actually be run after ztcfg:
+ LC_ALL=C $dahdi_registration on
+
+ # this one could actually be run after dahdi_cfg:
LC_ALL=C $xpp_sync "$XPP_SYNC"
}
@@ -289,7 +289,7 @@
usage() {
program=`basename $0`
- echo >&2 "$program: generate dahdi.conf and zapata.conf"
+ echo >&2 "$program: generate dahdi system.conf and zapata.conf"
echo >&2 "(version $VERSION, $rcsid)"
echo >&2 "usage:"
echo >&2 " $program [-sRdv] [-m k|l|g] [-c <country_code>] [-e <base_exten>] [-F]"
@@ -301,7 +301,7 @@
echo >&2 " -c CODE: set the country code (default: $lc_country)"
echo >&2 " -e NUM: set the base extension number (default: $base_exten)"
echo >&2 " -F: Don't print FXSs in zapata.conf"
- echo >&2 " -l: output a list of detected channels instead of dahdi.conf"
+ echo >&2 " -l: output a list of detected channels instead of dahdi system.conf"
echo >&2 " -d: Perform hardware detection"
echo >&2 " -u: Unload dahdi modules (will not restart Asterisk)."
echo >&2 " -v: verbose"
@@ -374,7 +374,7 @@
then echo "# astbanktype: $astbank_type" >>$dahdi_file;
fi
echo "${sig}$method=$chan" >>$dahdi_file
- # zap2amp will rewrite those from dahdi.conf and hints there
+ # zap2amp will rewrite those from dahdi system.conf and hints there
if [ "$fxsdisable" = 'yes' ] && [ "$sig" = 'fxo' ]; then return; fi
echo "signalling=${sig}_$method" >>$zapata_file
@@ -575,10 +575,10 @@
}
# The module configuration generated by dahdi includes a totally useless
-# automatic run of ztcfg after modules loading. As a workaround for that,
-# we provide an empty dahdi.conf temporarily.
+# automatic run of dahdi_cfg after modules loading. As a workaround for that,
+# we provide an empty dahdi system.conf temporarily.
#
-# At hardware detection time we shouldn't really touch dahdi.conf . So we
+# At hardware detection time we shouldn't really touch dahdi system.conf . So we
# must keep a copy of it somewhere.
#
# I use ZAPCONF_FILE_SYSTEM rather than ZAPCONF_FILE, as the bogus modprobe
@@ -590,15 +590,15 @@
temporary_zapconf() {
case "$1" in
save)
- say "Temporarily moving dahdi.conf aside to work around broken modprobe.conf"
- ZAPCONF_FILE_TMP=`mktemp /tmp/genzaptelconf-dahdi.conf-XXXXXX` || die "Error creating temporary dahdi.conf"
+ say "Temporarily moving dahdi system.conf aside to work around broken modprobe.conf"
+ ZAPCONF_FILE_TMP=`mktemp /tmp/genzaptelconf-dahdi-system.conf-XXXXXX` || die "Error creating temporary dahdi system.conf"
if [ -f $ZAPCONF_FILE_SYSTEM ]; then
cp -a $ZAPCONF_FILE_SYSTEM $ZAPCONF_FILE_TMP
fi
echo -n >$ZAPCONF_FILE_SYSTEM
;;
restore)
- # restore original dahdi.conf:
+ # restore original dahdi system.conf:
if [ "$ZAPCONF_FILE_TMP" = '' ]; then return; fi
mv $ZAPCONF_FILE_TMP $ZAPCONF_FILE_SYSTEM
ZAPCONF_FILE_TMP=''
@@ -787,7 +787,7 @@
case "$mode" in
files)
echo span=$span_num,$span_timing,$span_lbo,$span_framing,$span_coding$span_yellow >> $dahdi_file
- # leave a comment in dahdi.conf that allows to tell if
+ # leave a comment in dahdi system.conf that allows to tell if
# this span is TE or NT:
if [ "$span_termtype" != '' ]
then echo "# termtype: $span_termtype" >>$dahdi_file
@@ -885,7 +885,7 @@
# Autogenerated by $0 -- do not hand edit
# Dahdi Configuration File
#
-# This file is parsed by the Dahdi Configurator, ztcfg
+# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# It must be in the module loading order
@@ -904,7 +904,7 @@
# For each line in the spanlist: see if it represents a channel.
# if it does, test that the channel is usable.
- # we do that by configuring it (using ztcfg with a 1-line config file)
+ # we do that by configuring it (using dahdi_cfg with a 1-line config file)
# and then trying to read 1 byte from the device file.
#
# The '<(command)' syntax creates a temporary file whose content is is the
@@ -913,7 +913,7 @@
# Another problem with such an approach is how to include an existing
# configuration file. For instance: how to include some default settings.
#
- # Maybe an 'include' directive should be added to dahdi.conf ?
+ # Maybe an 'include' directive should be added to dahdi system.conf ?
#cat $spanlist |
for procfile in $spanlist
do
@@ -965,8 +965,8 @@
# this can be either FXS or FXO
maybe_fxs=0
maybe_fxo=0
- $ztcfg_cmd -c <(echo fxoks=$chan_num) &>/dev/null && maybe_fxs=1
- $ztcfg_cmd -c <(echo fxsks=$chan_num) &>/dev/null && maybe_fxo=1
+ $dahdi_cfg_cmd -c <(echo fxoks=$chan_num) &>/dev/null && maybe_fxs=1
+ $dahdi_cfg_cmd -c <(echo fxsks=$chan_num) &>/dev/null && maybe_fxo=1
if [ $maybe_fxs = 1 ] && [ $maybe_fxo = 1 ]
then
# An installed module won't accept both FXS and FXO signalling types:
@@ -1164,7 +1164,7 @@
wait_for_zapctl
say "Generating '${ZAPCONF_FILE} and ${ZAPATA_FILE}'"
genconf files
- run_ztcfg
+ run_dahdi_cfg
fi
if [ "$tmp_dir" != '' ]
Modified: tools/trunk/xpp/genzaptelconf.8
URL: http://svn.digium.com/view/dahdi/tools/trunk/xpp/genzaptelconf.8?view=diff&rev=4460&r1=4459&r2=4460
==============================================================================
--- tools/trunk/xpp/genzaptelconf.8 (original)
+++ tools/trunk/xpp/genzaptelconf.8 Wed Jun 25 04:16:51 2008
@@ -20,7 +20,7 @@
.B genzaptelconf
is a script to detect dahdi devices (currently mostly TDM cards are
supported). It generates both
-.I /etc/dahdi.conf
+.I /etc/dahdi/system.conf
and
.I /etc/asterisk/zapata-channels.conf
@@ -36,7 +36,7 @@
.RS
A two-letter country code. Sets the country-code for the zonezone
entries in
-.I dahdi.conf
+.I system.conf
, The default is the value of
.I lc_country
from
@@ -205,7 +205,7 @@
.I ZAPCONF_FILE
.RS
-ztcfg's configuration file. The sane default is /etc/dahdi.conf .
+ztcfg's configuration file. The sane default is /etc/dahdi/system.conf .
.RE
.I ZAPATA_FILE
@@ -246,14 +246,14 @@
.RE
.SH FILES
-.I /etc/dahdi.conf
+.I /etc/dahdi/system.conf
.RS
The configuration file used by
.I ztcfg
to configure dahdi devices. re-written by
.I genzaptelconf
. A backup copy is saved to
-.I /etc/dahdi.conf.bak
+.I /etc/dahdi/system.conf.bak
.
.RE
More information about the dahdi-commits
mailing list