[dahdi-commits] tzafrir: linux/trunk r4408 - /linux/trunk/drivers/dahdi/xpp/
SVN commits to the DAHDI project
dahdi-commits at lists.digium.com
Thu Jun 19 08:36:15 CDT 2008
Author: tzafrir
Date: Thu Jun 19 08:36:15 2008
New Revision: 4408
URL: http://svn.digium.com/view/dahdi?view=rev&rev=4408
Log:
Further XPP driver adjustments:
* More complete Kconfig.
* Verification of FXO init script moved here from tools.
* Perl init scripts are verified.
* Correct name XppConf*ig*.
* Add the files for xpp_mmap .
Added:
linux/trunk/drivers/dahdi/xpp/mmapbus.c (with props)
linux/trunk/drivers/dahdi/xpp/mmapbus.h (with props)
linux/trunk/drivers/dahdi/xpp/mmapdrv.c (with props)
linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c (with props)
Modified:
linux/trunk/drivers/dahdi/xpp/ (props changed)
linux/trunk/drivers/dahdi/xpp/Kbuild
linux/trunk/drivers/dahdi/xpp/Kconfig
linux/trunk/drivers/dahdi/xpp/XppConfig.pm
linux/trunk/drivers/dahdi/xpp/init_card_1_30
linux/trunk/drivers/dahdi/xpp/init_card_2_30
linux/trunk/drivers/dahdi/xpp/init_card_3_30
linux/trunk/drivers/dahdi/xpp/init_card_4_30
Propchange: linux/trunk/drivers/dahdi/xpp/
------------------------------------------------------------------------------
--- svn:ignore (original)
+++ svn:ignore Thu Jun 19 08:36:15 2008
@@ -1,9 +1,11 @@
*.o
*.ko
-*.o.cmd
-*.ko.cmd
+*.cmd
*.mod.c
.tmp_versions
.*.swp
+*.verified
xpp_version.h
README.Astribank.html
+print_fxo_modes
+init_fxo_modes
Modified: linux/trunk/drivers/dahdi/xpp/Kbuild
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/Kbuild?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/Kbuild (original)
+++ linux/trunk/drivers/dahdi/xpp/Kbuild Thu Jun 19 08:36:15 2008
@@ -1,9 +1,3 @@
-ifdef SUBDIRS
- ZAP_KERNEL = $(SUBDIRS)
-else
- ZAP_KERNEL = $(M)
-endif
-
EXTRA_CFLAGS = $(XPP_LOCAL_CFLAGS) \
-DDEBUG \
-DPOLL_DIGITAL_INPUTS \
@@ -13,20 +7,22 @@
-g
#
+WITH_BRISTUFF := $(shell grep '^[[:space:]]*\#[[:space:]]*define[[:space:]]\+CONFIG_ZAPATA_BRI_DCHANS\>' $(src)/../dahdi_config.h)
+
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPP) += xpp.o
-obj-$(CONFIG_DAHDI_XPP_USB) += xpp_usb.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPD_FXS) += xpd_fxs.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPD_FXO) += xpd_fxo.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPD_PRI) += xpd_pri.o
-
-HAS_BRISTUFF := $(shell grep '^[[:space:]]*\#[[:space:]]*define[[:space:]]\+CONFIG_ZAPATA_BRI_DCHANS\>' $(ZAP_KERNEL)/dahdi_config.h)
+ifneq (,$(WITH_BRISTUFF))
+obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPD_BRI) += xpd_bri.o
+endif
# Build only supported modules
ifneq (,$(filter y m,$(CONFIG_USB)))
-obj-m += xpp_usb.o
+obj-$(DAHDI_BUILD_ALL)$(CONFIG_XPP_USB) += xpp_usb.o
endif
-ifneq (,$(HAS_BRISTUFF))
-obj-m += xpd_bri.o
+ifneq (,$(filter y m,$(CONFIG_BF537)))
+obj-$(DAHDI_BUILD_ALL)$(CONFIG_XPP_MMAP) += xpp_mmap.o
endif
xpp-objs += xbus-core.o xbus-sysfs.o xbus-pcm.o xframe_queue.o xpp_zap.o xproto.o card_global.o zap_debug.o
@@ -34,6 +30,7 @@
xpd_fxo-objs += card_fxo.o
xpd_bri-objs += card_bri.o
xpd_pri-objs += card_pri.o
+xpp_mmap-objs += mmapbus.o mmapdrv.o
ifeq (y,$(PARPORT_DEBUG))
EXTRA_CFLAGS += -DDEBUG_SYNC_PARPORT
@@ -42,7 +39,7 @@
# Handle versioning
XPP_VERSION_STR ?= $(shell if [ -r $(obj)/.version ]; then echo "\"`cat $(obj)/.version`\""; else echo '"Unknown"'; fi)
-clean-files := xpp_version.h
+clean-files += xpp_version.h
$(obj)/card_fxs.o $(obj)/card_fxo.o $(obj)/card_bri.o $(obj)/card_pri.o $(obj)/xpp_usb.o $(obj)/xpp.o: $(obj)/xpp_version.h
@@ -53,5 +50,42 @@
fi
$(Q)rm -f $@.tmp
+# Validations:
+# - Syntactic verification of perl scripts
+# - Handle country table validation for init_card_2_*
+
+XPP_PROTOCOL_VERSION := $(shell grep XPP_PROTOCOL_VERSION $(src)/xproto.h | sed -e 's/^.*XPP_PROTOCOL_VERSION[ \t]*//')
+
+xpp_verifications = \
+ init_card_1_$(XPP_PROTOCOL_VERSION) \
+ init_card_2_$(XPP_PROTOCOL_VERSION) \
+ init_card_3_$(XPP_PROTOCOL_VERSION) \
+ init_card_4_$(XPP_PROTOCOL_VERSION) \
+ init_fxo_modes
+
+xpp_verified = $(foreach file, $(xpp_verifications), $(file).verified)
+
+FXO_MODES = $(src)/../fxo_modes.h
+FXO_VERIFY = $(obj)/init_card_2_$(XPP_PROTOCOL_VERSION) -v $(obj)/init_fxo_modes
+
+hostprogs-y := print_fxo_modes
+always := $(xpp_verified)
+print_fxo_modes-objs := print_fxo_modes.o
+HOSTCFLAGS_print_fxo_modes.o += -include $(FXO_MODES)
+
+clean-files += print_fxo_modes init_fxo_modes $(xpp_verified)
+
+$(obj)/init_fxo_modes: $(obj)/print_fxo_modes
+ @echo ' GEN $@'
+ $(Q)$(obj)/print_fxo_modes >$@ || (rm -f $@; exit 1)
+
+$(obj)/init_fxo_modes.verified: $(obj)/init_card_2_$(XPP_PROTOCOL_VERSION) $(obj)/init_fxo_modes
+ @echo ' CHECK $(obj)/init_card_2_$(XPP_PROTOCOL_VERSION)'
+ $(Q)$(FXO_VERIFY) && touch $@ || (rm -f $@; exit 1)
+
+$(obj)/init_card_%_$(XPP_PROTOCOL_VERSION).verified: $(src)/init_card_%_$(XPP_PROTOCOL_VERSION)
+ @echo ' VERIFY $<'
+ $(Q)perl -c $< 2> $@ || (cat $@; rm -f $@; exit 1)
+
.PHONY: FORCE
FORCE:
Modified: linux/trunk/drivers/dahdi/xpp/Kconfig
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/Kconfig?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/Kconfig (original)
+++ linux/trunk/drivers/dahdi/xpp/Kconfig Thu Jun 19 08:36:15 2008
@@ -4,7 +4,7 @@
menuconfig DAHDI_XPP
tristate "Xorcom Astribank Support"
- depends on DAHDI && USB
+ depends on DAHDI
default DAHDI
---help---
Infrastructure support for Xorcom Astribank products.
@@ -14,16 +14,32 @@
If unsure, say Y.
-if DAHDI_XPP
+config DAHDI_XPP_USB
+ tristate "Astribank USB transport"
+ depends on DAHDI_XPP && USB
+ default DAHDI_XPP
+ ---help---
+ To compile this driver as a module, choose M here: the
+ module will be called xpp_usb.
-config DAHDI_XPP_USB
- tristate
- depends on DAHDI_XPP
+ If unsure, say Y.
+
+config DAHDI_XPP_MMAP
+ tristate "Astribank Blackfin transport"
+ depends on DAHDI_XPP && BF537
default DAHDI_XPP
+ ---help---
+ To compile this driver as a module, choose M here: the
+ module will be called xpp_mmap.
+
+ This module can be compiled only on Blackfin architecture
+ (with uClinux).
+
+ If unsure, say N.
config DAHDI_XPD_FXS
tristate "FXS port Support"
- depends on DAHDI_XPP
+ depends on DAHDI_XPP && (DAHDI_XPP_USB || DAHDI_XPP_MMAP)
default DAHDI_XPP
---help---
To compile this driver as a module, choose M here: the
@@ -33,7 +49,7 @@
config DAHDI_XPD_FXO
tristate "FXO port Support"
- depends on DAHDI_XPP
+ depends on DAHDI_XPP && (DAHDI_XPP_USB || DAHDI_XPP_MMAP)
default DAHDI_XPP
---help---
To compile this driver as a module, choose M here: the
@@ -41,14 +57,26 @@
If unsure, say Y.
+config DAHDI_XPD_BRI
+ tristate "BRI port Support"
+ depends on DAHDI_XPP && (DAHDI_XPP_USB || DAHDI_XPP_MMAP)
+ default DAHDI_XPP
+ ---help---
+ To compile this driver as a module, choose M here: the
+ module will be called xpd_pri.
+
+ Note: this driver will be automatically excluded
+ from compilation if dahdi driver does not
+ contain the "bristuff" patch.
+
+ If unsure, say Y.
+
config DAHDI_XPD_PRI
tristate "PRI port Support"
- depends on DAHDI_XPP
+ depends on DAHDI_XPP && (DAHDI_XPP_USB || DAHDI_XPP_MMAP)
default DAHDI_XPP
---help---
To compile this driver as a module, choose M here: the
module will be called xpd_pri.
If unsure, say Y.
-
-endif # DAHDI_XPP
Modified: linux/trunk/drivers/dahdi/xpp/XppConfig.pm
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/XppConfig.pm?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/XppConfig.pm (original)
+++ linux/trunk/drivers/dahdi/xpp/XppConfig.pm Thu Jun 19 08:36:15 2008
@@ -1,4 +1,4 @@
-package XppConf;
+package XppConfig;
#
# Written by Oron Peled <oron at actcom.co.il>
# Copyright (C) 2008, Xorcom
@@ -10,8 +10,6 @@
use strict;
my $conf_file = "/etc/dahdi/xpp.conf";
-
-$conf_file = $ENV{XPP_CONFIG} if $ENV{XPP_CONFIG};
sub subst_var($$) {
my $lookup = shift;
@@ -55,7 +53,13 @@
return %xpp_config;
}
-my %x = read_config($conf_file);
+sub import {
+ my $pack = shift || die "Import without package?";
+ my $init_dir = shift || die "$pack::import -- missing init_dir parameter";
+ my $local_conf = "$init_dir/xpp.conf";
+ $conf_file = $local_conf if -r $local_conf;
+ my %x = read_config($conf_file);
+}
sub show_vars {
my $assoc = shift;
@@ -79,6 +83,5 @@
return ($conf_file, %result);
}
-source_vars(qw(XPP_PRI_SETUP opermode));
1;
Modified: linux/trunk/drivers/dahdi/xpp/init_card_1_30
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/init_card_1_30?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/init_card_1_30 (original)
+++ linux/trunk/drivers/dahdi/xpp/init_card_1_30 Thu Jun 19 08:36:15 2008
@@ -45,7 +45,7 @@
my $program = basename("$0");
my $init_dir = dirname("$0");
BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir", "$init_dir/zconf"); }
-use XppConfig;
+use XppConfig $init_dir;
my $unit_id;
my %opts;
$ENV{XPP_BASE} = '/proc/xpp';
Modified: linux/trunk/drivers/dahdi/xpp/init_card_2_30
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/init_card_2_30?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/init_card_2_30 (original)
+++ linux/trunk/drivers/dahdi/xpp/init_card_2_30 Thu Jun 19 08:36:15 2008
@@ -45,12 +45,12 @@
my $program = basename("$0");
my $init_dir = dirname("$0");
BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir", "$init_dir/zconf", "$init_dir/utils/zconf"); }
-use XppConfig;
+use XppConfig $init_dir;
my $unit_id;
my %opts;
$ENV{XPP_BASE} = '/proc/xpp';
-getopts('o:', \%opts);
+getopts('o:v:', \%opts);
my $debug;
@@ -127,9 +127,9 @@
CANADA reg16=00 reg26=C0 reg30=00 reg31=20
CHILE reg16=00 reg26=C0 reg30=00 reg31=20
CHINA reg16=00 reg26=30 reg30=0F reg31=20
-COLUMBIA reg16=00 reg26=C0 reg30=00 reg31=20
+COLOMBIA reg16=00 reg26=C0 reg30=00 reg31=20
CROATIA reg16=00 reg26=C2 reg30=02 reg31=20
-CYRPUS reg16=00 reg26=C2 reg30=02 reg31=20
+CYPRUS reg16=00 reg26=C2 reg30=02 reg31=20
CZECH reg16=00 reg26=C2 reg30=02 reg31=20
DENMARK reg16=00 reg26=C2 reg30=02 reg31=28
ECUADOR reg16=00 reg26=C0 reg30=00 reg31=20
@@ -263,6 +263,7 @@
sub opermode_verify($) {
my $input = shift or die;
my %verification_table;
+ my $mismatches = 0;
open(F, $input) or die "$0: Failed opening '$input': $!\n";
while(<F>) {
@@ -281,7 +282,8 @@
foreach my $location (sort keys %verification_table) {
my $mode = $opermode_table{$location};
if(! defined $mode) {
- printf STDERR "Missing $location\n";
+ printf STDERR "Missing from $0: '$location'\n";
+ $mismatches++;
next;
}
my $verify_mode = $verification_table{$location};
@@ -291,16 +293,20 @@
print STDERR "DIFF: $location:\n";
printf STDERR "\t%-20s: %s\n", "program", $str1;
printf STDERR "\t%-20s: %s\n", "verify", $str2;
+ $mismatches++;
}
}
# Second test: check for extra data in our program
foreach my $location (sort keys %opermode_table) {
my $mode = $verification_table{$location};
if(! defined $mode) {
- printf STDERR "Extra $location\n";
+ printf STDERR "Extra in $0 '$location'\n";
+ $mismatches++;
next;
}
}
+ print STDERR "Total $mismatches mismatches\n" if $mismatches;
+ return $mismatches;
}
sub read_defaults() {
@@ -331,11 +337,12 @@
FXO::opermode_preprocess; # Must be first
-if(@ARGV and $ARGV[0] =~ /^verify(.*)/) {
- my $verify_file = $1;
- die "Usage: $0 verify=filename\n" unless $verify_file =~ s/^=//;
+if($opts{v}) {
+ my $verify_file = $opts{v};
+ die "Usage: $0 [-v verify_filename]\n" unless $verify_file;
main::debug "$0: opermode verification (input='$verify_file')";
- FXO::opermode_verify($verify_file);
+ my $mismatches = FXO::opermode_verify($verify_file);
+ die "$0: Verification against $verify_file failed\n" if $mismatches != 0;
exit 0;
}
Modified: linux/trunk/drivers/dahdi/xpp/init_card_3_30
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/init_card_3_30?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/init_card_3_30 (original)
+++ linux/trunk/drivers/dahdi/xpp/init_card_3_30 Thu Jun 19 08:36:15 2008
@@ -57,6 +57,8 @@
my $program = basename("$0");
my $init_dir = dirname("$0");
+BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir", "$init_dir/zconf"); }
+use XppConfig $init_dir;
my $unit_id;
my %opts;
$ENV{XPP_BASE} = '/proc/xpp';
Modified: linux/trunk/drivers/dahdi/xpp/init_card_4_30
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/init_card_4_30?view=diff&rev=4408&r1=4407&r2=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/init_card_4_30 (original)
+++ linux/trunk/drivers/dahdi/xpp/init_card_4_30 Thu Jun 19 08:36:15 2008
@@ -54,6 +54,8 @@
my $program = basename("$0");
my $init_dir = dirname("$0");
+BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir", "$init_dir/zconf"); }
+use XppConfig $init_dir;
my $unit_id;
my %opts;
$ENV{XPP_BASE} = '/proc/xpp';
@@ -344,8 +346,6 @@
}
package main;
-BEGIN { my $dir = dirname($0); unshift(@INC, "$dir", "$dir/zconf"); }
-use XppConfig;
logit "Starting '$0'";
Added: linux/trunk/drivers/dahdi/xpp/mmapbus.c
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/mmapbus.c?view=auto&rev=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/mmapbus.c (added)
+++ linux/trunk/drivers/dahdi/xpp/mmapbus.c Thu Jun 19 08:36:15 2008
@@ -1,0 +1,91 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include "mmapbus.h"
+
+static int mmap_match(struct device *dev, struct device_driver *driver)
+{
+ return !strncmp(dev->bus_id, driver->name, strlen(driver->name));
+}
+static int mmap_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
+{
+ envp[0] = buffer;
+ envp[1] = NULL;
+ return 0;
+}
+
+static void mmap_bus_release(struct device *dev)
+{
+}
+
+static void mmap_dev_release(struct device *dev)
+{
+}
+
+static struct bus_type mmap_bus_type = {
+ .name = "mmap",
+ .match = mmap_match,
+ .uevent = mmap_uevent,
+};
+
+static struct device mmap_bus = {
+ .bus_id = "mmap0",
+ .release = mmap_bus_release,
+};
+
+
+
+int register_mmap_device(struct mmap_device *dev)
+{
+ dev->dev.bus = &mmap_bus_type;
+ dev->dev.parent = &mmap_bus;
+ dev->dev.release = mmap_dev_release;
+ strncpy(dev->dev.bus_id, dev->name, BUS_ID_SIZE);
+ return device_register(&dev->dev);
+}
+
+void unregister_mmap_device(struct mmap_device *dev)
+{
+ device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL(register_mmap_device);
+EXPORT_SYMBOL(unregister_mmap_device);
+
+int register_mmap_driver(struct mmap_driver *driver)
+{
+ driver->driver.bus = &mmap_bus_type;
+ return driver_register(&driver->driver);
+}
+
+void unregister_mmap_driver(struct mmap_driver *driver)
+{
+ driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL(register_mmap_driver);
+EXPORT_SYMBOL(unregister_mmap_driver);
+
+int register_mmap_bus(void)
+{
+ int ret = 0;
+ if ((ret = bus_register(&mmap_bus_type)) < 0)
+ goto bus_type_reg;
+ if ((ret = device_register(&mmap_bus)) < 0)
+ goto bus_reg;
+ return ret;
+
+bus_reg:
+ bus_unregister(&mmap_bus_type);
+bus_type_reg:
+ return ret;
+}
+
+void unregister_mmap_bus(void)
+{
+ device_unregister(&mmap_bus);
+ bus_unregister(&mmap_bus_type);
+}
+EXPORT_SYMBOL(register_mmap_bus);
+EXPORT_SYMBOL(unregister_mmap_bus);
+
+MODULE_AUTHOR("Alexander Landau <landau.alex at gmail.com>");
+MODULE_LICENSE("GPL");
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.c
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.c
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.c
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: linux/trunk/drivers/dahdi/xpp/mmapbus.h
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/mmapbus.h?view=auto&rev=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/mmapbus.h (added)
+++ linux/trunk/drivers/dahdi/xpp/mmapbus.h Thu Jun 19 08:36:15 2008
@@ -1,0 +1,26 @@
+#ifndef MMAPBUS_H
+#define MMAPBUS_H
+
+#include <linux/device.h>
+
+struct mmap_device {
+ char *name;
+ struct mmap_driver *driver;
+ struct device dev;
+};
+#define to_mmap_device(x) container_of(x, struct mmap_device, dev)
+
+struct mmap_driver {
+ struct module *module;
+ struct device_driver driver;
+};
+#define to_mmap_driver(x) container_of(x, struct mmap_driver, driver)
+
+int register_mmap_bus(void);
+void unregister_mmap_bus(void);
+int register_mmap_device(struct mmap_device *dev);
+void unregister_mmap_device(struct mmap_device *dev);
+int register_mmap_driver(struct mmap_driver *driver);
+void unregister_mmap_driver(struct mmap_driver *driver);
+
+#endif
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.h
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.h
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: linux/trunk/drivers/dahdi/xpp/mmapbus.h
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: linux/trunk/drivers/dahdi/xpp/mmapdrv.c
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/mmapdrv.c?view=auto&rev=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/mmapdrv.c (added)
+++ linux/trunk/drivers/dahdi/xpp/mmapdrv.c Thu Jun 19 08:36:15 2008
@@ -1,0 +1,598 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+#include <dahdi.h>
+#include "mmapbus.h"
+#include "xbus-core.h"
+#include "zap_debug.h"
+#include "xdefs.h"
+#include "xproto.h"
+#include "xframe_queue.h"
+
+/* Check at compile time that sizeof(xframe_t) is a multiple of 4 */
+typedef char sizeof_xframe_t_should_be_divisible_by_4[((sizeof(xframe_t) % 4) == 0) * 2 - 1];
+
+#define ssync() __builtin_bfin_ssync()
+
+//#define AB_IN_BUF PF5
+/* firmware pins */
+#define DATA PG8
+#define NCONFIG PG9
+#define CONF_DONE PG10
+#define DCLK PG11
+#define NSTATUS PG12
+
+#ifdef DEBUG_VIA_GPIO
+/*
+ * For debugging we can use the following two pins.
+ * These two pins are not used *after initialization*
+ */
+#define DEBUG_GPIO1 CONF_DONE
+#define DEBUG_GPIO2 NSTATUS
+
+static int rx_intr_counter;
+#endif
+
+#define FPGA_RX_IRQ IRQ_PF7
+#define FPGA_TX_IRQ IRQ_PF4
+#define FPGA_BASE_ADDR ((volatile char __iomem *)0x203FA800)
+
+#define END_OF_FRAME 0x0001
+#define GET_LEN 0x0002
+#define START_RD_BURST 0x0008
+#define AS_BF_MODE 0x0010 //stand alone Astribank without USB (Asterisk BlackFin Mode)
+#define EC_BF_MODE 0x0020 //all data between Astribank and USB routed thru BF(EchoCanceler BlackFin Mode)
+#define NO_BF_MODE 0x0040 //Astribank worke with USB only (no BlackFin Mode)
+#define SET_XA_DIR 0x0080
+#define GET_XPD_STS 0x0100
+#define GET_CHECKSUM 0x0200
+
+static const char rcsid[] = "$Id$";
+
+static DEF_PARM(int, debug, 0, 0644, "Print DBG statements");
+static DEF_PARM(int, notxrx, 0, 0644, "Don't send or receive anything");
+
+struct counter {
+ long intr_min, intr_max;
+ long intr_avg, intr_count;
+};
+
+static xbus_t *global_xbus;
+static bool tx_ready = 1;
+static spinlock_t tx_ready_lock = SPIN_LOCK_UNLOCKED;
+static struct xframe_queue txpool;
+static unsigned int pcm_in_pool_count;
+static bool disconnecting;
+static struct kmem_cache *xframe_cache;
+static struct counter tx_counter, rx_counter;
+static unsigned long pcm_dropped;
+
+static void print_buffer(const char *msg, const char *buf, int len)
+{
+ int i;
+ printk(KERN_ERR "%s", msg);
+ for (i = 0; i < len; i++) {
+ printk("%02X ", (unsigned char)buf[i]);
+ }
+ printk("\n");
+}
+
+static void update_counter(struct counter *c, struct timeval *tv1)
+{
+ struct timeval tv2;
+ long diff;
+ do_gettimeofday(&tv2);
+ diff = usec_diff(&tv2, tv1);
+ if (c->intr_min > diff)
+ c->intr_min = diff;
+ if (c->intr_max < diff)
+ c->intr_max = diff;
+ c->intr_avg = (c->intr_avg*c->intr_count + diff) / (c->intr_count+1);
+ c->intr_count++;
+}
+
+static irqreturn_t xpp_mmap_rx_irq(int irq, void *dev_id)
+{
+ unsigned short rxcnt;
+ xbus_t *xbus;
+ xframe_t *xframe;
+ byte *buf;
+ bool in_use = 0;
+ struct timeval tv1;
+
+ do_gettimeofday(&tv1);
+ if (unlikely(disconnecting))
+ return IRQ_HANDLED;
+
+ xbus = get_xbus(global_xbus->num);
+ BUG_ON(!xbus);
+ if(!XBUS_GET(xbus)) {
+ if (printk_ratelimit())
+ XBUS_ERR(xbus, "Dropping packet. Is shutting down.\n");
+ goto out;
+ }
+ in_use = 1;
+
+ outw(GET_LEN, FPGA_BASE_ADDR + 4);
+ rxcnt = inw(FPGA_BASE_ADDR);
+ if (rxcnt < 3) {
+ if (printk_ratelimit())
+ NOTICE("Got %d bytes\n", rxcnt);
+ goto out;
+ }
+ if(rxcnt >= XFRAME_DATASIZE) {
+ if (printk_ratelimit())
+ ERR("Bad rxcnt=%d\n", rxcnt);
+ goto out;
+ }
+
+ xframe = ALLOC_RECV_XFRAME(xbus);
+ if (!xframe) {
+ if (printk_ratelimit())
+ XBUS_ERR(xbus, "Empty receive_pool\n");
+ goto out;
+ }
+ buf = xframe->packets;
+ atomic_set(&xframe->frame_len, rxcnt);
+ do_gettimeofday(&xframe->tv_received);
+#ifdef DEBUG_VIA_GPIO
+ if (rx_intr_counter & 1)
+ bfin_write_PORTGIO_SET(DEBUG_GPIO1);
+ else
+ bfin_write_PORTGIO_CLEAR(DEBUG_GPIO1);
+#endif
+ outw(START_RD_BURST, FPGA_BASE_ADDR + 4);
+ insw((unsigned long)FPGA_BASE_ADDR, buf, rxcnt / 2);
+#if 0
+ for (count = 0; count < rxcnt; count+=2) {
+ unsigned short v = inw(FPGA_BASE_ADDR);
+ buf[count] = v & 0xFF;
+ buf[count+1] = v >> 8;
+ }
+#endif
+ if (rxcnt & 1)
+ buf[rxcnt-1] = inw(FPGA_BASE_ADDR);
+ /* Sanity check: length of first packet in frame should be no more than the frame length */
+ if (((buf[0] | (buf[1]<<8)) & 0x3FF) > rxcnt) {
+ if (printk_ratelimit()) {
+ ERR("Packet len=%d, frame len=%d\n", (buf[0] | (buf[1]<<8)) & 0x3FF, rxcnt);
+ print_buffer("16 bytes of packet: ", buf, 16);
+ }
+ goto free;
+ }
+ if (debug && buf[2] != 0x12)
+ print_buffer("Received: ", buf, rxcnt);
+ if (!notxrx) {
+ xbus_receive_xframe(xbus, xframe);
+#ifdef DEBUG_VIA_GPIO
+ if (rx_intr_counter & 1)
+ bfin_write_PORTGIO_SET(DEBUG_GPIO2);
+ else
+ bfin_write_PORTGIO_CLEAR(DEBUG_GPIO2);
+#endif
+ goto out;
+ }
+free:
+ FREE_RECV_XFRAME(xbus, xframe);
+out:
+ if (in_use)
+ XBUS_PUT(xbus);
+ put_xbus(xbus);
+#ifdef DEBUG_VIA_GPIO
+ rx_intr_counter++;
+#endif
+ update_counter(&rx_counter, &tv1);
+ return IRQ_HANDLED;
+}
+
+static void send_buffer(unsigned char *buf, unsigned long len)
+{
+ if (debug && len >= 3 && buf[2] != 0x11)
+ print_buffer("Sent: ", buf, len);
+ outsw((unsigned long)FPGA_BASE_ADDR, buf, len / 2);
+ if (len & 1)
+ outw((unsigned short)buf[len-1], FPGA_BASE_ADDR);
+ outw(END_OF_FRAME, FPGA_BASE_ADDR + 4);
+}
+
+static irqreturn_t xpp_mmap_tx_irq(int irq, void *dev_id)
+{
+ unsigned long flags;
+ xbus_t *xbus;
+ xframe_t *xframe;
+ struct timeval tv1;
+
+ do_gettimeofday(&tv1);
+ if (unlikely(disconnecting)) {
+ update_counter(&tx_counter, &tv1);
+ return IRQ_HANDLED;
+ }
+ spin_lock_irqsave(&tx_ready_lock, flags);
+ xframe = xframe_dequeue(&txpool);
+ if (!xframe) {
+ tx_ready = 1;
+ spin_unlock_irqrestore(&tx_ready_lock, flags);
+ update_counter(&tx_counter, &tv1);
+ return IRQ_HANDLED;
+ }
+ tx_ready = 0;
+ if (XPACKET_IS_PCM((xpacket_t *)xframe->packets))
+ pcm_in_pool_count--;
+ spin_unlock_irqrestore(&tx_ready_lock, flags);
+ xbus = (xbus_t *)xframe->priv;
+ BUG_ON(!xbus);
+ xbus = get_xbus(xbus->num);
+ BUG_ON(!xbus);
+ send_buffer(xframe->packets, XFRAME_LEN(xframe));
+ FREE_SEND_XFRAME(xbus, xframe);
+ put_xbus(xbus);
+ update_counter(&tx_counter, &tv1);
+ return IRQ_HANDLED;
+}
+
+static int xframe_send_common(xbus_t *xbus, xframe_t *xframe, bool pcm)
+{
+ unsigned long flags;
+ if (unlikely(disconnecting)) {
+ FREE_SEND_XFRAME(xbus, xframe);
+ return -ENODEV;
+ }
+ if (unlikely(notxrx)) {
+ FREE_SEND_XFRAME(xbus, xframe);
+ return 0;
+ }
+ spin_lock_irqsave(&tx_ready_lock, flags);
+ if (tx_ready) {
+ tx_ready = 0;
+ send_buffer(xframe->packets, XFRAME_LEN(xframe));
+ spin_unlock_irqrestore(&tx_ready_lock, flags);
+ FREE_SEND_XFRAME(xbus, xframe);
+ } else {
+ if (pcm && pcm_in_pool_count >= 1) {
+ static int rate_limit;
+ if ((rate_limit++ % 1000) == 0)
+ XBUS_ERR(xbus, "Dropped PCM xframe (pcm_in_pool_count=%d).\n", pcm_in_pool_count);
+ FREE_SEND_XFRAME(xbus, xframe);
+ pcm_dropped++;
+ } else {
+ if (!xframe_enqueue(&txpool, xframe)) {
+ static int rate_limit;
+ spin_unlock_irqrestore(&tx_ready_lock, flags);
+ if ((rate_limit++ % 1000) == 0)
+ XBUS_ERR(xbus, "Dropped xframe. Cannot enqueue.\n");
+ FREE_SEND_XFRAME(xbus, xframe);
+ return -E2BIG;
+ }
+ if (pcm)
+ pcm_in_pool_count++;
+ }
+ spin_unlock_irqrestore(&tx_ready_lock, flags);
+ }
+ return 0;
+}
+
+static xframe_t *alloc_xframe(xbus_t *xbus, gfp_t gfp_flags)
+{
+ xframe_t *xframe = kmem_cache_alloc(xframe_cache, gfp_flags);
+ if (!xframe) {
+ static int rate_limit;
+ if ((rate_limit++ % 1000) < 5)
+ XBUS_ERR(xbus, "frame allocation failed (%d)\n", rate_limit);
+ return NULL;
+ }
+ xframe_init(xbus, xframe, ((byte*)xframe) + sizeof(xframe_t), XFRAME_DATASIZE, xbus);
+ return xframe;
+}
+
+static void free_xframe(xbus_t *xbus, xframe_t *xframe)
+{
+ memset(xframe, 0, sizeof(*xframe));
+ kmem_cache_free(xframe_cache, xframe);
+}
+
+static int xframe_send_pcm(xbus_t *xbus, xframe_t *xframe)
+{
+ return xframe_send_common(xbus, xframe, 1);
+}
+
+static int xframe_send_cmd(xbus_t *xbus, xframe_t *xframe)
+{
+ return xframe_send_common(xbus, xframe, 0);
+}
+
+static struct xbus_ops xmmap_ops = {
+ .xframe_send_pcm = xframe_send_pcm,
+ .xframe_send_cmd = xframe_send_cmd,
+ .alloc_xframe = alloc_xframe,
+ .free_xframe = free_xframe,
+};
+
+static int fill_proc_queue(char *p, struct xframe_queue *q)
+{
+ int len;
+
+ len = sprintf(p,
+ "%-15s: counts %3d, %3d, %3d worst %3d, overflows %3d worst_lag %02ld.%ld ms\n",
+ q->name,
+ q->steady_state_count,
+ q->count,
+ q->max_count,
+ q->worst_count,
+ q->overflows,
+ q->worst_lag_usec / 1000,
+ q->worst_lag_usec % 1000);
+ xframe_queue_clearstats(q);
+ return len;
+}
+
+static int fill_proc_counter(char *p, struct counter *c)
+{
+ return sprintf(p, "min=%ld\nmax=%ld\navg=%ld\ncount=%ld\n", c->intr_min, c->intr_max, c->intr_avg, c->intr_count);
+}
+
+static int xpp_mmap_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ int len = 0;
+ len += fill_proc_queue(page + len, &txpool);
+ len += sprintf(page + len, "pcm_in_pool_count=%d\n", pcm_in_pool_count);
+ len += sprintf(page + len, "pcm_dropped=%lu\n", pcm_dropped);
+ len += sprintf(page + len, "\nrx_counter:\n");
+ len += fill_proc_counter(page + len, &rx_counter);
+ len += sprintf(page + len, "\ntx_counter:\n");
+ len += fill_proc_counter(page + len, &tx_counter);
+ if (len <= off+count) {
+ *eof = 1;
+ tx_counter.intr_min = rx_counter.intr_min = INT_MAX;
+ tx_counter.intr_max = rx_counter.intr_max = 0;
+ tx_counter.intr_avg = rx_counter.intr_avg = 0;
+ tx_counter.intr_count = rx_counter.intr_count = 0;
+ }
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+}
+
+static int xpp_mmap_proc_write(struct file *file, const char __user *buffer, unsigned long count, void *data)
+{
+ int i = 0;
+ char *txchunk, *p, *endp;
+
+ if (count >= XFRAME_DATASIZE*3+10)
+ return -EINVAL;
+ p = txchunk = kmalloc(count+1, GFP_KERNEL);
+ if (copy_from_user(txchunk, buffer, count)) {
+ count = -EFAULT;
+ goto out;
+ }
+ txchunk[count] = '\0';
+
+ while (*p) {
+ unsigned long value;
+ while (*p == ' ' || *p == '\t' || *p == '\n' || *p == '\r') p++;
+ if (*p == '\0') break;
+ value = simple_strtoul(p, &endp, 16);
+ if (endp == p || value > 0xFF) {
+ INFO("%s: Bad input\n", __FUNCTION__);
+ count = -EINVAL;
+ goto out;
+ }
+ p = endp;
+ txchunk[i++] = (char)value;
+ }
+ send_buffer(txchunk, i);
+out:
+ kfree(txchunk);
+ return count;
+}
+
+static struct mmap_driver astribank_driver = {
+ .module = THIS_MODULE,
+ .driver = {
+ .name = "xpp_mmap",
+ },
+};
+
+static struct mmap_device astribank_dev = {
+ .name = "astribank0",
+ .driver = &astribank_driver,
+};
+
+static int __init xpp_mmap_load_fpga(u8 *data, size_t size)
+{
+ size_t i;
+ bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | DATA | NCONFIG | DCLK); //set data, nconfig and dclk to port out
+ bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~(DATA | NCONFIG | DCLK));
+ bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() & ~(CONF_DONE | NSTATUS));//set conf_done and nstatus to port in
+ bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() & ~(DATA | NCONFIG | DCLK));
+ bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() | CONF_DONE | NSTATUS);
+
+ bfin_write_PORTGIO_CLEAR(NCONFIG); //reset fpga during configuration holds nCONFIG low
+ udelay(40); //Tcfg ~40us delay
+ bfin_write_PORTGIO_SET(NCONFIG); //transition nCONFIG to high - reset end.
+ udelay(40); //Tcf2ck ~40us delay
+ if (!(bfin_read_PORTGIO() & NSTATUS))
+ return -EIO; //report reset faill - Tcf2st1 pass
+
+#if 0
+ if (!(bfin_read_PORTGIO() & CONF_DONE))
+ return -EIO;
+#endif
+ bfin_write_PORTGIO_CLEAR(DCLK);
+ for (i=0; i<size; i++) { // loop EP2OUT buffer data to FPGA
+ int j;
+ u8 byte = data[i];
+ for (j=0; j<8; j++) //send the configuration data through the DATA0 pin one bit at a time.
+ {
+ if (byte & 1)
+ bfin_write_PORTGIO_SET(DATA);
+ else
+ bfin_write_PORTGIO_CLEAR(DATA);
+ byte >>= 1;
+ bfin_write_PORTGIO_SET(DCLK);
+ bfin_write_PORTGIO_CLEAR(DCLK);
+ }
+ if (!(bfin_read_PORTGIO() & NSTATUS))
+ return -EIO; //check the nSTATUS
+ }
+ bfin_write_PORTGIO_CLEAR(DATA);
+ udelay(1);
+ if (!(bfin_read_PORTGIO() & CONF_DONE))
+ return -EIO;
+#ifdef DEBUG_VIA_GPIO
+ /*
+ * Normal initialization is done. Now we can reuse
+ * some pins that were used only during initialization
+ * to be used for debugging from now on.
+ */
+ bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | DEBUG_GPIO1 | DEBUG_GPIO2); //set to port out
+ bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~(DEBUG_GPIO1 | DEBUG_GPIO2));
+ bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() & ~(DEBUG_GPIO1 | DEBUG_GPIO2));
+#endif
+ udelay(40); //tCD2UM - CONF_DONE high to user mode
+ return 0;
+}
+
+static void __exit xpp_mmap_unload_fpga(void)
+{
+ bfin_write_PORTGIO_CLEAR(NCONFIG); //reset fpga during configuration holds nCONFIG low
+ udelay(40); //Tcfg ~40us delay
+ bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() & ~( DATA | NCONFIG | DCLK)); //disable output pin
+ bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() & ~( CONF_DONE | NSTATUS));//disable input buffer
+ INFO("FPGA Firmware unloaded\n");
+}
+
+static int __init xpp_mmap_load_firmware(void)
+{
+ const struct firmware *fw;
+ int ret;
+ if ((ret = request_firmware(&fw, "astribank.bin", &astribank_dev.dev)) < 0)
+ return ret;
+ xpp_mmap_load_fpga(fw->data, fw->size);
+ release_firmware(fw);
+ return ret;
+}
+
+static int __init xpp_mmap_init(void)
+{
+ int ret;
+ struct proc_dir_entry *proc_entry;
+
+ if ((ret = register_mmap_bus()) < 0)
+ goto bus_reg;
+ if ((ret = register_mmap_driver(&astribank_driver)) < 0)
+ goto driver_reg;
+ if ((ret = register_mmap_device(&astribank_dev)) < 0)
+ goto dev_reg;
+ if ((ret = xpp_mmap_load_firmware()) < 0) {
+ ERR("xpp_mmap_load_firmware() failed, errno=%d\n", ret);
+ goto fail_fw;
+ }
+
+ if ((ret = request_irq(FPGA_RX_IRQ, xpp_mmap_rx_irq, IRQF_TRIGGER_RISING, "xpp_mmap_rx", NULL)) < 0) {
+ ERR("Unable to attach to RX interrupt %d\n", FPGA_RX_IRQ);
+ goto fail_irq_rx;
+ }
+ if ((ret = request_irq(FPGA_TX_IRQ, xpp_mmap_tx_irq, IRQF_TRIGGER_RISING, "xpp_mmap_tx", NULL)) < 0) {
+ ERR("Unable to attach to TX interrupt %d\n", FPGA_TX_IRQ);
+ goto fail_irq_tx;
+ }
+ if (!request_region((resource_size_t)FPGA_BASE_ADDR, 8, "xpp_mmap")) {
+ ERR("Unable to request memory region at %p\n", FPGA_BASE_ADDR);
+ goto fail_region;
+ }
+ outw(AS_BF_MODE, FPGA_BASE_ADDR + 4);
+
+ xframe_cache = kmem_cache_create("xframe_cache",
+ sizeof(xframe_t) + XFRAME_DATASIZE,
+ 0, 0,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+ NULL,
+#endif
+ NULL);
+ if(!xframe_cache) {
+ ret = -ENOMEM;
+ goto fail_cache;
+ }
+ /* interface with Zaptel */
+ global_xbus = xbus_new(&xmmap_ops, XFRAME_DATASIZE, NULL);
+ if (!global_xbus) {
+ ret = -ENOMEM;
+ goto fail_xbus;
+ }
+ strncpy(global_xbus->location, "mmap", XBUS_DESCLEN);
+ strncpy(global_xbus->label, "mmap:0", LABEL_SIZE);
+
+ xframe_queue_init(&txpool, 10, 200, "mmap_txpool", global_xbus);
+ if (!(proc_entry = create_proc_entry("xpp_mmap", 0, global_xbus->proc_xbus_dir))) {
+ ERR("create_proc_entry() failed\n");
+ ret = -EINVAL;
+ goto fail_proc;
+ }
+ proc_entry->write_proc = xpp_mmap_proc_write;
+ proc_entry->read_proc = xpp_mmap_proc_read;
+ /* Go xbus, go! */
+ xbus_connect(global_xbus);
+ INFO("xpp_mmap module loaded\n");
+
+ return 0;
+
+fail_proc:
+ xbus_disconnect(global_xbus);
+fail_xbus:
+ kmem_cache_destroy(xframe_cache);
+fail_cache:
+ release_region((resource_size_t)FPGA_BASE_ADDR, 8);
+fail_region:
+ free_irq(FPGA_TX_IRQ, NULL);
+fail_irq_tx:
+ free_irq(FPGA_RX_IRQ, NULL);
+fail_irq_rx:
+fail_fw:
+ unregister_mmap_device(&astribank_dev);
+dev_reg:
+ unregister_mmap_driver(&astribank_driver);
+driver_reg:
+ unregister_mmap_bus();
+bus_reg:
+ return ret;
+}
+
+static void __exit xpp_mmap_exit(void)
+{
+ xbus_t *xbus;
+ DBG(GENERAL, "\n");
+ disconnecting = 1;
+ xbus = get_xbus(global_xbus->num);
+ remove_proc_entry("xpp_mmap", xbus->proc_xbus_dir);
+ xframe_queue_clear(&txpool);
+ xbus_disconnect(xbus); /* xbus_disconnect() calls put_xbus() */
+ kmem_cache_destroy(xframe_cache);
+
+ release_region((resource_size_t)FPGA_BASE_ADDR, 8);
+ free_irq(FPGA_RX_IRQ, NULL);
+ free_irq(FPGA_TX_IRQ, NULL);
+
+ unregister_mmap_device(&astribank_dev);
+ unregister_mmap_driver(&astribank_driver);
+ unregister_mmap_bus();
+ xpp_mmap_unload_fpga();
+ INFO("xpp_mmap module unloaded\n");
+}
+
+module_init(xpp_mmap_init);
+module_exit(xpp_mmap_exit);
+MODULE_AUTHOR("Alexander Landau <landau.alex at gmail.com>");
+MODULE_LICENSE("GPL");
Propchange: linux/trunk/drivers/dahdi/xpp/mmapdrv.c
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: linux/trunk/drivers/dahdi/xpp/mmapdrv.c
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: linux/trunk/drivers/dahdi/xpp/mmapdrv.c
------------------------------------------------------------------------------
svn:mime-type = text/plain
Added: linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c?view=auto&rev=4408
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c (added)
+++ linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c Thu Jun 19 08:36:15 2008
@@ -1,0 +1,32 @@
+#include <stdio.h>
+
+int main(int argc, char *argv[])
+{
+ size_t i;
+
+ for (i=0; i<(sizeof(fxo_modes)/sizeof(struct fxo_mode)); i++) {
+ if (fxo_modes[i].name == NULL) break;
+ int reg16=0, reg26=0, reg30=0, reg31=0x20;
+ char ring_osc[BUFSIZ]="", ring_x[BUFSIZ] = "";
+
+ reg16 |= (fxo_modes[i].ohs << 6);
+ reg16 |= (fxo_modes[i].rz << 1);
+ reg16 |= (fxo_modes[i].rt);
+
+ reg26 |= (fxo_modes[i].dcv << 6);
+ reg26 |= (fxo_modes[i].mini << 4);
+ reg26 |= (fxo_modes[i].ilim << 1);
+
+ reg30 = (fxo_modes[i].acim);
+
+ reg31 |= (fxo_modes[i].ohs2 << 3);
+
+ if (fxo_modes[i].ring_osc)
+ snprintf(ring_osc, BUFSIZ, "ring_osc=%04X", fxo_modes[i].ring_osc);
+ if (fxo_modes[i].ring_x)
+ snprintf(ring_x, BUFSIZ, "ring_x=%04X", fxo_modes[i].ring_x);
+ printf("%-15s\treg16=%02X\treg26=%02X\treg30=%02X\treg31=%02X\t%s\t%s\n",
+ fxo_modes[i].name, reg16, reg26, reg30, reg31, ring_osc, ring_x);
+ }
+ return 0;
+}
Propchange: linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c
------------------------------------------------------------------------------
svn:eol-style = native
Propchange: linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c
------------------------------------------------------------------------------
svn:keywords = Author Date Id Revision
Propchange: linux/trunk/drivers/dahdi/xpp/print_fxo_modes.c
------------------------------------------------------------------------------
svn:mime-type = text/plain
More information about the dahdi-commits
mailing list