<div>Hello,</div><div><br></div><div>You have to use LOCAL Channels to originate a perfect Video Call Outbound, atleast we used the method below and it works perfectly.</div><div><br></div><div>So here is what you need to do :</div>
<div><br></div><div>[outbound]</div><div>exten => _XXXXXXXXXX,1,Set(CHANNEL(transfercapability)=DIGITAL)</div><div>exten => _XXXXXXXXXX,2,Set(CHANNEL(userinformationlayer1)=38)</div><div>exten => _XXXXXXXXXX,3,Set(CALLERID(num)=1234567890)</div>
<div>exten => _XXXXXXXXXX,4,Dial(DAHDI/g0/${EXTEN},30)</div><div>exten => _XXXXXXXXXX,5,Hangup()</div><div><br></div><div>And then Dial out using : Local/9876543210@outbound within your .call or ORIGINATE command.</div>
<div><br></div><div>If you want, you can also check the ${DIALSTATUS} variable to know what happened with the call, but I am not sure if that would tell you if the remote party had 3G or not, there is no way to find that out, atleast i wasnt able to find that out, if anyone has light on the status code to look for in PRI, do let me know,</div>
<div><br></div><div>Hope this solves your problem,</div><div><br></div><div>Regards,<br>Mitul Limbani,<br>Chief Architech & Founder,<br>Enterux Solutions Pvt. Ltd.<br>110 Reena Complex, Opp. Nathani Steel, <br>Vidyavihar (W), Mumbai - 400 086. India<br>
<a href="http://www.enterux.com/" target="_blank">http://www.enterux.com/</a><br><a href="http://www.entvoice.com/" target="_blank">http://www.entvoice.com/</a><br>email: <a href="mailto:mitul@enterux.in" target="_blank">mitul@enterux.in</a><br>
DID: +91-22-61447605<br>Cell: +91-9820332422<br><br></div>