Hi Klaus,<br><br>Below is the response which I am getting while try to make video out bound call,<br><br><br> -- Attempting call on Local/9467000603@3G for 1@video:1 (Retry 1)<br> -- Executing [9467000603@3G:1] System("Local/9467000603@3G-8c88,2", "sh /etc/asterisk/video_callback.sh 9467000603 CALLING") in new stack<br>
-- Executing [9467000603@3G:2] h324m_call("Local/9467000603@3G-8c88,2", "9467000603@3GV") in new stack<br>[Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to find a codec translation path from slin to amr<br>
[Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1143 app_h324m_call: app_h324m_call: Unable to set read format to AMR-NB!<br>[Mar 13 11:56:14] WARNING[16543]: channel.c:2781 set_format: Unable to find a codec translation path from slin to amr<br>
[Mar 13 11:56:14] WARNING[16543]: app_h324m.c:1145 app_h324m_call: app_h324m_call: Unable to set read format to AMR-NB!<br> -- Executing [9467000603@3GV:1] Set("Local/9467000603@3GV-daad,2", "CHANNEL(transfercapability)=VIDEO") in new stack<br>
-- Executing [9467000603@3GV:2] Dial("Local/9467000603@3GV-daad,2", "Zap/g0/9467000603") in new stack<br>-- Making new call for cr 32785<br> -- Requested transfer capability: 0x18 - VIDEO<br>> Protocol Discriminator: Q.931 (8) len=44<br>
> Call Ref: len= 2 (reference 17/0x11) (Originator)<br>> Message type: SETUP (5)<br>> [04 03 88 90 bf]<br>> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8)<br>
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>> User information layer 1: Unknown (63)<br>> [18 03 a9 83 81]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0<br>
> ChanSel: As indicated in following octets<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>> Ext: 1 Channel: 1 ]<br>> [6c 0d 21 80 30 34 30 34 34 33 31 33 30 30 30]<br>
> Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)<br>> Presentation: Presentation permitted, user number not screened (0) '04044313000' ]<br>
> [70 0b c1 39 34 36 37 30 30 30 36 30 33]<br>> Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9467000603' ]<br>> [a1]<br>> Sending Complete (len= 1)<br>
q931.c:3092 q931_setup: call 32785 on channel 1 enters state 1 (Call Initiated)<br> -- Called g0/9467000603<br>< Protocol Discriminator: Q.931 (8) len=10<br>< Call Ref: len= 2 (reference 17/0x11) (Terminator)<br>
< Message type: CALL PROCEEDING (2)<br>< [18 03 a9 83 81]<br>< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0<br>< ChanSel: As indicated in following octets<br>
< Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>< Ext: 1 Channel: 1 ]<br>-- Processing IE 24 (cs0, Channel Identification)<br>q931.c:3641 q931_receive: call 32785 on channel 1 enters state 3 (Outgoing call Proceeding)<br>
-- Zap/1-1 is proceeding passing it to Local/9467000603@3GV-daad,2<br>< Protocol Discriminator: Q.931 (8) len=9<br>< Call Ref: len= 2 (reference 17/0x11) (Terminator)<br>< Message type: DISCONNECT (69)<br>< [08 02 82 83]<br>
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2)<br>< Ext: 1 Cause: No route to destination (3), class = Normal Event (0) ]<br>
-- Processing IE 8 (cs0, Cause)<br>q931.c:3784 q931_receive: call 32785 on channel 1 enters state 12 (Disconnect Indication)<br> -- Channel 0/1, span 1 got hangup request, cause 3<br>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request<br>
q931.c:2925 q931_release: call 32785 on channel 1 enters state 19 (Release Request)<br>> Protocol Discriminator: Q.931 (8) len=9<br>> Call Ref: len= 2 (reference 17/0x11) (Originator)<br>> Message type: RELEASE (77)<br>
> [08 02 81 83]<br>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)<br>> Ext: 1 Cause: No route to destination (3), class = Normal Event (0) ]<br>
-- Hungup 'Zap/1-1'<br> == Everyone is busy/congested at this time (1:0/0/1)<br> == Auto fallthrough, channel 'Local/9467000603@3GV-daad,2' status is 'CHANUNAVAIL'<br> == Auto fallthrough, channel 'Local/9467000603@3G-8c88,2' status is 'UNKNOWN'<br>
[Mar 13 11:56:14] NOTICE[16542]: pbx_spool.c:341 attempt_thread: Call failed to go through, reason (1) Hangup<br>< Protocol Discriminator: Q.931 (8) len=5<br>< Call Ref: len= 2 (reference 17/0x11) (Terminator)<br>< Message type: RELEASE COMPLETE (90)<br>
q931.c:3724 q931_receive: call 32785 on channel 1 enters state 0 (Null)<br>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br><br>
<br><br><br>Could you help me to fix this issue.<br><br><br>Thanks,<br><br>Jack<br><br><br><div class="gmail_quote">On Fri, Mar 13, 2009 at 9:44 AM, jack nicolson <span dir="ltr"><<a href="mailto:jack.nicolson123@gmail.com">jack.nicolson123@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Please ignore the previous message you are right Klaus. There is no zap channel i need to start them.<br>
<br><br>Thanks<br><font color="#888888"><br>Jack</font><div><div></div><div class="h5"><br><br><div class="gmail_quote">On Fri, Mar 13, 2009 at 9:20 AM, jack nicolson <span dir="ltr"><<a href="mailto:jack.nicolson123@gmail.com" target="_blank">jack.nicolson123@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi Klaus,<br><br>My normal audio outbound call works fine.only problem with video outbound call.<br>
<br>My asterisk box is connected to E1 line through Digium card.<br><br><br>Thanks,<br><font color="#888888"><br>Jack</font><div><div></div><div><br><br><div class="gmail_quote">
On Thu, Mar 12, 2009 at 8:30 PM, Klaus Darilion <span dir="ltr"><<a href="mailto:klaus.mailinglists@pernau.at" target="_blank">klaus.mailinglists@pernau.at</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
<br>
jack nicolson schrieb:<br>
<div>> -- Executing [9467000603@3GV:2] Dial("Local/9467000603@3GV-0624,2",<br>
> "Zap/g0/9467000603") in new stack<br>
> [Mar 12 19:15:36] WARNING[9206]: channel.c:3027 ast_request: No channel<br>
> type registered for 'Zap'<br>
> [Mar 12 19:15:36] WARNING[9206]: app_dial.c:1183 dial_exec_full: Unable<br>
> to create channel of type 'Zap' (cause 66 - Channel not implemented)<br>
> == Everyone is busy/congested at this time (1:0/0/1)<br>
<br>
<br>
</div>There is no Zap channel. How are you connected to the PSTN? Zap? Dahdi?<br>
Are normal audio calls work?<br>
<br>
klaus<br>
<br>
_______________________________________________<br>
--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--" target="_blank">http://www.api-digital.com--</a><br>
<br>
asterisk-video mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br>
</blockquote></div><br>
</div></div></blockquote></div><br>
</div></div></blockquote></div><br>