<div>Dear Klaus,</div>
<div> </div>
<div>After changing pridialplan and prilocaldialplan to international and local in zapata.conf everything works!</div>
<div>So you were right about the dialplan error in my pri debug. I can dial to a 3G phone and play a video or make a sip call to it, video works just fine...</div>
<div> </div>
<div>Thanks very much for your help!</div>
<div> </div>
<div>Rene<br><br></div>
<div class="gmail_quote">On Tue, Apr 1, 2008 at 11:11 AM, Klaus Darilion <<a href="mailto:klaus.mailinglists@pernau.at">klaus.mailinglists@pernau.at</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">The SETUP message does not contain LCC. MAybe the patch is not applied<br>properly? Or wrong zaptel.conf config? Check the config of one of the<br>
zap channels in the respective trunk, e.g.:<br><br>videogw*CLI> zap show channel 1<br>Channel: 1I><br>File Descriptor: 17<br>Span: 1<br>Extension: ><br>Dialing: no<br>Context: frompstn<br>Caller ID: 00436648232115<br>
Calling TON: 17<br>Caller ID name:<br>Destroy: 0<br>InAlarm: 0<br>Signalling Type: ISDN PRI<br>Radio: 0<br>Owner: <None><br>Real: <None><br>Callwait: <None><br>Threeway: <None><br>Confno: -1<br>Propagated Conference: -1<br>
Real in conference: 0<br>DSP: no<br>Relax DTMF: no<br>Dialing/CallwaitCAS: 0/0<br>Default law: alaw<br>Fax Handled: no<br>Pulse phone: no<br>Echo Cancellation: 128 taps unless TDM bridged, currently OFF<br>PRI Flags:<br>PRI Logical Span: Implicit<br>
H324M Signalling: use 'Low Layer Compatibility' IE<br>^^^^^^^^^^^^^^^^^^<br><br>1. The line "H324M Signalling" indicates that the patch is applied.<br>2. It should show "use 'Low Layer Compatibility' IE"<br>
<br>Further, as Jose suggested make a proper zaptel config:<br>
<div class="Ih2E3d">Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0)<br><br></div>Unknown Number Type is ok, but I never saw Unknown Number Plan.<br>
<div class="Ih2E3d"><br>regards<br>klaus<br><br><br><br><br><br><br>Rene van Weert schrieb:<br></div>
<div class="Ih2E3d">> Dear Klaus,<br>><br>> I added the line to zapata.conf as you mentioned. However I still get<br>> the same result:<br>><br>> -- Executing [665@from-sip:1] h324m_call("SIP/2000-0823bb08",<br>
</div>> "666@test <mailto:<a href="mailto:666@test">666@test</a>>") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:1] Set("Local/666@test-23e7,2<br></div>> <mailto:<a href="mailto:Local/666@test-23e7">Local/666@test-23e7</a>,2>", "CHANNEL(transfercapability)=VIDEO") in<br>
<div class="Ih2E3d">> new stack<br>> -- Executing [666@test:2] NoOp("Local/666@test-23e7,2<br></div>> <mailto:<a href="mailto:Local/666@test-23e7">Local/666@test-23e7</a>,2>", "transfer=VIDEO") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:3] Set("Local/666@test-23e7,2<br></div>> <mailto:<a href="mailto:Local/666@test-23e7">Local/666@test-23e7</a>,2>", "CHANNEL(userinformationlayer1)=38") in<br>
<div class="Ih2E3d">> new stack<br>> -- Executing [666@test:4] NoOp("Local/666@test-23e7,2<br></div>> <mailto:<a href="mailto:Local/666@test-23e7">Local/666@test-23e7</a>,2>", "ul1=38") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:5] Dial("Local/666@test-23e7,2<br></div>> <mailto:<a href="mailto:Local/666@test-23e7">Local/666@test-23e7</a>,2>", "ZAP/g0/06xxxxxxxx") in new stack<br>
<div>
<div></div>
<div class="Wj3C7c">> -- Making new call for cr 32772<br>> -- digital call, setting user information layer 1 to 38 (0x26)<br>> -- zap call: h324musellc=0, ast->userinformationlayer1=38<br>> -- Requested transfer capability: 0x18 - VIDEO<br>
> > Protocol Discriminator: Q.931 (8) len=37<br>> > Call Ref: len= 2 (reference 4/0x4) (Originator)<br>> > Message type: SETUP (5)<br>> > [04 03 88 90 a6]<br>> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer<br>
> capability: Unrestricted digital information (8)<br>> > Ext: 1 Trans mode/rate: 64kbps,<br>> circuit-mode (16)<br>> > User information layer 1: H.223 and<br>
> H.245 (38)<br>> > [18 03 a9 83 81]<br>> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0<br>> Exclusive Dchan: 0<br>> > ChanSel: Reserved<br>> > Ext: 1 Coding: 0 Number Specified Channel<br>
> Type: 3<br>> > Ext: 1 Channel: 1 ]<br>> > [6c 06 00 80 32 30 30 30]<br>> > Calling Number (len= 8) [ Ext: 0 TON: Unknown Number Type (0) NPI:<br>> Unknown Number Plan (0)<br>
> > Presentation: Presentation permitted, user<br>> number not screened (0) '2000' ]<br>> > [70 0b 80 30 36 31 35 30 36 34 30 38 30]<br>> > Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI:<br>
> Unknown Number Plan (0) '06xxxxxxxx' ]<br>> > [a1]skdev*CLI><br>> > Sending Complete (len= 1)<br>> q931.c:3245 q931_setup: call 32772 on channel 1 enters state 1 (Call<br>> Initiated)<br>
> -- Called g0/06xxxxxxxx<br>> < Protocol Discriminator: Q.931 (8) len=10<br>> < Call Ref: len= 2 (reference 4/0x4) (Terminator)<br>> < Message type: RELEASE COMPLETE (90)<br>> < [08 03 80 e4 04]<br>
> < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0<br>> Location: User (0)<br>> < Ext: 1 Cause: Invalid information element contents<br>> (100), class = Protocol Error (e.g. unknown message) (6) ]<br>
> < Cause data 1: 04 (4)<br>> -- Processing IE 8 (cs0, Cause)<br>> q931.c:3875 q931_receive: call 32772 on channel 1 enters state 0 (Null)<br>> -- Channel 0/1, span 1 got hangup, cause 100<br>
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br>> -- Hungup 'Zap/1-1'<br>> == Everyone is busy/congested at this time (1:0/0/1)<br>
> == Auto fallthrough, channel 'Local/666@test-23e7,2'<br></div></div>> <mailto:'Local/666@test-23e7,2'> status is 'CHANUNAVAIL'<br>
<div class="Ih2E3d">> == Auto fallthrough, channel 'SIP/2000-0823bb08' status is 'UNKNOWN'<br>> Kind regards,<br>><br>> Rene van Weert<br>><br>><br></div>
<div>
<div></div>
<div class="Wj3C7c">> ------------------------------------------------------------------------<br>><br>> _______________________________________________<br>> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>
><br>> asterisk-video mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br>
<br>_______________________________________________<br>--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br><br>asterisk-video mailing list<br>
To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br></div></div></blockquote></div>
<br>