<div>Dear Klaus,</div>
<div> </div>
<div>I added the line to zapata.conf as you mentioned. However I still get the same result:</div>
<div> </div>
<div> -- Executing [665@from-sip:1] h324m_call("SIP/2000-0823bb08", "<a href="mailto:666@test">666@test</a>") in new stack<br> -- Executing [666@test:1] Set("<a href="mailto:Local/666@test-23e7,2">Local/666@test-23e7,2</a>", "CHANNEL(transfercapability)=VIDEO") in new stack<br>
-- Executing [666@test:2] NoOp("<a href="mailto:Local/666@test-23e7,2">Local/666@test-23e7,2</a>", "transfer=VIDEO") in new stack<br> -- Executing [666@test:3] Set("<a href="mailto:Local/666@test-23e7,2">Local/666@test-23e7,2</a>", "CHANNEL(userinformationlayer1)=38") in new stack<br>
-- Executing [666@test:4] NoOp("<a href="mailto:Local/666@test-23e7,2">Local/666@test-23e7,2</a>", "ul1=38") in new stack<br> -- Executing [666@test:5] Dial("<a href="mailto:Local/666@test-23e7,2">Local/666@test-23e7,2</a>", "ZAP/g0/06xxxxxxxx") in new stack<br>
-- Making new call for cr 32772<br> -- digital call, setting user information layer 1 to 38 (0x26)<br> -- zap call: h324musellc=0, ast->userinformationlayer1=38<br> -- Requested transfer capability: 0x18 - VIDEO<br>
> Protocol Discriminator: Q.931 (8) len=37<br>> Call Ref: len= 2 (reference 4/0x4) (Originator)<br>> Message type: SETUP (5)<br>> [04 03 88 90 a6]<br>> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8)<br>
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>> User information layer 1: H.223 and H.245 (38)<br>> [18 03 a9 83 81]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0<br>
> ChanSel: Reserved<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>> Ext: 1 Channel: 1 ]<br>> [6c 06 00 80 32 30 30 30]<br>> Calling Number (len= 8) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0)<br>
> Presentation: Presentation permitted, user number not screened (0) '2000' ]<br>> [70 0b 80 30 36 31 35 30 36 34 30 38 30]<br>> Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '06xxxxxxxx' ]<br>
> [a1]skdev*CLI><br>> Sending Complete (len= 1)<br>q931.c:3245 q931_setup: call 32772 on channel 1 enters state 1 (Call Initiated)<br> -- Called g0/06xxxxxxxx<br>< Protocol Discriminator: Q.931 (8) len=10<br>
< Call Ref: len= 2 (reference 4/0x4) (Terminator)<br>< Message type: RELEASE COMPLETE (90)<br>< [08 03 80 e4 04]<br>< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)<br>
< Ext: 1 Cause: Invalid information element contents (100), class = Protocol Error (e.g. unknown message) (6) ]<br>< Cause data 1: 04 (4)<br>-- Processing IE 8 (cs0, Cause)<br>q931.c:3875 q931_receive: call 32772 on channel 1 enters state 0 (Null)<br>
-- Channel 0/1, span 1 got hangup, cause 100<br>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br> -- Hungup 'Zap/1-1'<br>
== Everyone is busy/congested at this time (1:0/0/1)<br> == Auto fallthrough, channel <a href="mailto:'Local/666@test-23e7,2'">'Local/666@test-23e7,2'</a> status is 'CHANUNAVAIL'<br> == Auto fallthrough, channel 'SIP/2000-0823bb08' status is 'UNKNOWN'<br>
</div>
<div>Kind regards,</div>
<div> </div>
<div>Rene van Weert</div>