<div>Dear Klaus,</div>
<div>Here is a dump of an incoming call:</div>
<div> </div>
<div>< Protocol Discriminator: Q.931 (8) len=46<br>< Call Ref: len= 2 (reference 7928/0x1EF8) (Originator)<br>< Message type: SETUP (5)<br>< [04 03 88 90 a6]<br>< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8)<br>
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>< User information layer 1: H.223 and H.245 (38)<br>< [18 03 a1 83 9f]<br>< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0<br>
< ChanSel: Reserved<br>< Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>< Ext: 1 Channel: 31 ]<br>< [6c 0b 21 83 36 31 35 30 36 34 30 38 30]<br>
< Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)<br>< Presentation: Presentation allowed of network provided number (3) '615064080' ]<br>
< [70 0a a1 33 36 37 35 30 38 31 30 38]<br>< Called Number (len=12) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '367508108' ]<br>< [7c 03 88 90 a6]<br>< Low-layer Compatability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8)<br>
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>< User information layer 1: H.223 and H.245 (38)<br>< [a1]<br>< Sending Complete (len= 1)<br>
-- Making new call for cr 7928<br>-- Processing Q.931 Call Setup<br>-- Processing IE 4 (cs0, Bearer Capability)<br> User layer 1: H.223 and H.245 (38)<br>-- Processing IE 24 (cs0, Channel Identification)<br>-- Processing IE 108 (cs0, Calling Party Number)<br>
-- Processing IE 112 (cs0, Called Party Number)<br>-- Processing IE 124 (cs0, Low-layer Compatibility)<br> receive_low_layer_compatibility<br> octet 3 decoded!<br> octet 4 decoded!<br> len=5, pos=2<br> looking for octet 5!<br>
LLC User layer 1: H.223 and H.245 (38)<br> octet 5 decoded!<br>-- Processing IE 161 (cs0, Sending Complete)<br>q931.c:3670 q931_receive: call 7928 on channel 31 enters state 6 (Call Present)<br>q931.c:2923 q931_call_proceeding: call 7928 on channel 31 enters state 9 (Incoming Call Proceeding)<br>
> Protocol Discriminator: Q.931 (8) len=10<br>> Call Ref: len= 2 (reference 7928/0x1EF8) (Terminator)<br>> Message type: CALL PROCEEDING (2)<br>> [18 03 a9 83 9f]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0<br>
> ChanSel: Reserved<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>> Ext: 1 Channel: 31 ]<br> -- Accepting call from '06xxxxxxxx' to '367508108' on channel 0/31, span 1<br>
-- Executing [367508108@isdn-in:1] GotoIf("Zap/31-1", "1?11:21") in new stack<br> -- Goto (isdn-in,367508108,11)<br> -- Executing [367508108@isdn-in:11] Answer("Zap/31-1", "") in new stack<br>
q931.c:3052 q931_connect: call 7928 on channel 31 enters state 8 (Connect Request)<br>> Protocol Discriminator: Q.931 (8) len=10<br>> Call Ref: len= 2 (reference 7928/0x1EF8) (Terminator)<br>> Message type: CONNECT (7)<br>
> [18 03 a9 83 9f]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0<br>> ChanSel: Reserved<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>
> Ext: 1 Channel: 31 ]<br> -- Executing [367508108@isdn-in:12] h324m_gw("Zap/31-1", "<a href="mailto:s@video">s@video</a>") in new stack<br> -- Executing [s@video:1] h324m_gw_answer("<a href="mailto:Local/s@video-2b16,2">Local/s@video-2b16,2</a>", "") in new stack<br>
< Protocol Discriminator: Q.931 (8) len=5<br>< Call Ref: len= 2 (reference 7928/0x1EF8) (Originator)<br>< Message type: CONNECT ACKNOWLEDGE (15)<br>q931.c:3828 q931_receive: call 7928 on channel 31 enters state 10 (Active)<br>
-- Executing [s@video:2] Dial("<a href="mailto:Local/s@video-2b16,2">Local/s@video-2b16,2</a>", "SIP/2000") in new stack<br>[Mar 31 18:14:45] WARNING[16489]: app_dial.c:1196 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination)<br>
== Everyone is busy/congested at this time (1:0/0/1)<br> == Auto fallthrough, channel <a href="mailto:'Local/s@video-2b16,2'">'Local/s@video-2b16,2'</a> status is 'CHANUNAVAIL'<br>< Protocol Discriminator: Q.931 (8) len=9<br>
< Call Ref: len= 2 (reference 7928/0x1EF8) (Originator)<br>< Message type: DISCONNECT (69)<br>< [08 02 80 90]<br>< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)<br>< Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]<br>
-- Processing IE 8 (cs0, Cause)<br>q931.c:3935 q931_receive: call 7928 on channel 31 enters state 12 (Disconnect Indication)<br> -- Channel 0/31, span 1 got hangup request, cause 16<br> == Spawn extension (isdn-in, 367508108, 12) exited non-zero on 'Zap/31-1'<br>
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request<br>q931.c:3068 q931_release: call 7928 on channel 31 enters state 19 (Release Request)<br>> Protocol Discriminator: Q.931 (8) len=9<br>
> Call Ref: len= 2 (reference 7928/0x1EF8) (Terminator)<br>> Message type: RELEASE (77)<br>> [08 02 81 90]><br>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)<br>
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]<br> -- Hungup 'Zap/31-1'<br>< Protocol Discriminator: Q.931 (8) len=5<br>< Call Ref: len= 2 (reference 7928/0x1EF8) (Originator)<br>
< Message type: RELEASE COMPLETE (90)<br>q931.c:3875 q931_receive: call 7928 on channel 31 enters state 0 (Null)<br>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br>
</div>
<div> </div>
<div>Kind regards,</div>
<div> </div>
<div>Rene<br><br></div>
<div class="gmail_quote">On Mon, Mar 31, 2008 at 4:01 PM, Klaus Darilion <<a href="mailto:klaus.mailinglists@pernau.at">klaus.mailinglists@pernau.at</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi!<br><br>I supsect that the ISDN switch does not like the signaling of H324M -<br>either it wants to have different format or it blocks h324m completely.<br>
<br>Please send the "pri debug" of an incoming SETUP with h324m. Usually<br>switches expect the same format as they send.<br><br>regards<br>klaus<br><br>Rene van Weert schrieb:<br>
<div class="Ih2E3d">> Hi Klaus,<br>><br>> Well the phone doesn't start ringing. The call doesn't get setup at all<br>> in Asterisk, I get the following messages:<br>><br>> -- Executing [665@from-sip:1] h324m_call("SIP/2000-08236c10",<br>
</div>> "666@test <mailto:<a href="mailto:666@test">666@test</a>>") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:1] Set("Local/666@test-1826,2<br></div>> <mailto:<a href="mailto:Local/666@test-1826">Local/666@test-1826</a>,2>", "CHANNEL(transfercapability)=VIDEO") in<br>
<div class="Ih2E3d">> new stack<br>> -- Executing [666@test:2] NoOp("Local/666@test-1826,2<br></div>> <mailto:<a href="mailto:Local/666@test-1826">Local/666@test-1826</a>,2>", "transfer=VIDEO") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:3] Set("Local/666@test-1826,2<br></div>> <mailto:<a href="mailto:Local/666@test-1826">Local/666@test-1826</a>,2>", "CHANNEL(userinformationlayer1)=38") in<br>
<div class="Ih2E3d">> new stack<br>> -- Executing [666@test:4] NoOp("Local/666@test-1826,2<br></div>> <mailto:<a href="mailto:Local/666@test-1826">Local/666@test-1826</a>,2>", "ul1=38") in new stack<br>
<div class="Ih2E3d">> -- Executing [666@test:5] Dial("Local/666@test-1826,2<br></div>> <mailto:<a href="mailto:Local/666@test-1826">Local/666@test-1826</a>,2>", "ZAP/g0/0654566635") in new stack<br>
<div>
<div></div>
<div class="Wj3C7c">> -- Making new call for cr 32784<br>> -- digital call, setting user information layer 1 to 38 (0x26)<br>> -- zap call: h324musellc=0, ast->userinformationlayer1=38<br>> -- Requested transfer capability: 0x18 - VIDEO<br>
> > Protocol Discriminator: Q.931 (8) len=37<br>> > Call Ref: len= 2 (reference 16/0x10) (Originator)<br>> > Message type: SETUP (5)<br>> > [04 03 88 90 a6]<br>> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer<br>
> capability: Unrestricted digital information (8)<br>> > Ext: 1 Trans mode/rate: 64kbps,<br>> circuit-mode (16)<br>> > User information layer 1: H.223 and<br>
> H.245 (38)<br>> > [18 03 a9 83 82]<br>> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0<br>> Exclusive Dchan: 0<br>> > ChanSel: Reserved<br>> > Ext: 1 Coding: 0 Number Specified Channel<br>
> Type: 3<br>> > Ext: 1 Channel: 2 ]<br>> > [6c 06 00 80 32 30 30 30]<br>> > Calling Number (len= 8) [ Ext: 0 TON: Unknown Number Type (0) NPI:<br>> Unknown Number Plan (0)<br>
> > Presentation: Presentation permitted, user<br>> number not screened (0) '2000' ]<br>> > [70 0b 80 30 36 31 35 30 36 34 30 38 30]<br>> > Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI:<br>
> Unknown Number Plan (0) '0654566635']<br>> > [a1]skdev*CLI><br>> > Sending Complete (len= 1)<br>> q931.c:3245 q931_setup: call 32784 on channel 2 enters state 1 (Call<br>> Initiated)<br>
> -- Called g0/0654566635<br>> < Protocol Discriminator: Q.931 (8) len=10<br>> < Call Ref: len= 2 (reference 16/0x10) (Terminator)<br>> < Message type: RELEASE COMPLETE (90)<br>> < [08 03 80 e4 04]<br>
> < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0<br>> Location: User (0)<br>> < Ext: 1 Cause: Invalid information element contents<br>> (100), class = Protocol Error (e.g. unknown message) (6) ]<br>
> < Cause data 1: 04 (4)<br>> -- Processing IE 8 (cs0, Cause)<br>> q931.c:3875 q931_receive: call 32784 on channel 2 enters state 0 (Null)<br>> -- Channel 0/2, span 1 got hangup, cause 100<br>
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br>> -- Hungup 'Zap/2-1'<br>> == Everyone is busy/congested at this time (1:0/0/1)<br>
> == Auto fallthrough, channel 'Local/666@test-1826,2'<br></div></div>> <mailto:'Local/666@test-1826,2'> status is 'CHANUNAVAIL'<br>
<div class="Ih2E3d">> == Auto fallthrough, channel 'SIP/2000-08236c10' status is 'UNKNOWN'<br>><br>> With kind regards,<br>><br>> Rene<br>><br>> On Mon, Mar 31, 2008 at 1:17 PM, Klaus Darilion<br>
</div>
<div class="Ih2E3d">> <<a href="mailto:klaus.mailinglists@pernau.at">klaus.mailinglists@pernau.at</a> <mailto:<a href="mailto:klaus.mailinglists@pernau.at">klaus.mailinglists@pernau.at</a>>> wrote:<br>><br>
><br>><br>> Rene van Weert schrieb:<br>> > Dear Klaus,<br>> ><br>> > I did what you said (remove AST_FORMAT_ULAW from app_h324m.c) but I<br>> > still get exactly the same error...<br>
> > What else do you think could be wrong?<br>><br>><br>> What is the exact problem? Does the mobile phone starts ringing? If yes,<br>> does it indicate an incoming audio or an incoming video call?<br>
><br>> klaus<br>><br>> _______________________________________________<br>> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>
> <<a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--/</a>><br>><br>> asterisk-video mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br>
><br>><br>><br></div>> ------------------------------------------------------------------------<br>
<div>
<div></div>
<div class="Wj3C7c">><br>> _______________________________________________<br>> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br>
><br>> asterisk-video mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br>
<br>_______________________________________________<br>--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--/" target="_blank">http://www.api-digital.com--</a><br><br>asterisk-video mailing list<br>
To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-video" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-video</a><br></div></div></blockquote></div>
<br>