<div>Hello everybody,</div> <div> </div> <div>first of all, please let me apologize for my inexperience in using Asterisk. I became involved with it a few years ago, but most of my knowledge from these days decided to walk away from me.... So if this question may be typical for an Asterisk-beginner, if you will, please let me know.</div> <div> </div> <div>My problem is the following: I am running AsteriskNow beta4 here, with the simple X-Lite 3.0 build 34025 and a Logitech USB Camera installed. Now I want to make video calls to other users on the system, but so far, I have not been successfull. Is it possible, that AsteriskNow does not support video-calls at all?</div> <div> </div> <div>I have added the lines </div> <div>; Added video support<BR>videosupport=yes<BR>allow=h261<BR>allow=h263<BR>allow=h263p</div> <div>to the sip.conf, and did a 'module reload'. Now when I open X-Lite, call someone and click the button 'Start' (sending video), the
video should appear on the other users screen, but it does not (I do see the cameras viewport through my own X-Lite, so that seems all properly set up). According to 'core show codecs', my Asterisk does support both the h.263 and h.263p codec, and these are also set on either X-Lite clients.</div> <div> </div> <div>Could anyone please help me to figure this out? Thanks!!</div><p> 
<hr size=1>Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und viel mehr bietet das <a href="http://de.rd.yahoo.com/evt=40589/*http://de.docs.yahoo.com/ymail/landing.html
" target=_new>neue Yahoo! Mail
</a>.