[Asterisk-video] Asterisk 11.6 h.264 passthrought Polycom VVX 500

[|| dave cantera Mobile]

david,
then you might want to check the module or codec list. perhaps the h.264 
codec is not being loaded, remember new versions of * changed the cmd 
structure, it might be core show codecs now.
daveC

http://www.voip-info.org/wiki/view/Asterisk+codecs

Use this commands in the Asterisk CLI for a detailed listing of the 
actual capabilities:

show codecs **
show translation
show translation recalc 10



      o show codecs Screen output

The 'show codecs' command is deprecated and will be removed in a future 
release. Please use 'core show codecs' instead.

Disclaimer: this command is for informational purposes only.
It does not indicate anything about your configuration.
INT BINARY HEX TYPE NAME DESC
------------------------------------------------------------------------
1 (1 << 0) (0x1) audio g723 (G.723.1)
2 (1 << 1) (0x2) audio gsm (GSM)
4 (1 << 2) (0x4) audio ulaw (G.711 u-law)
8 (1 << 3) (0x8) audio alaw (G.711 A-law)
16 (1 << 4) (0x10) audio g726aal2 (G.726 AAL2)
32 (1 << 5) (0x20) audio adpcm (ADPCM)
64 (1 << 6) (0x40) audio slin (16 bit Signed Linear PCM)
128 (1 << 7) (0x80) audio lpc10 (LPC10)
256 (1 << 8) (0x100) audio g729 (G.729A)
512 (1 << 9) (0x200) audio speex (SpeeX)
1024 (1 << 10) (0x400) audio ilbc (iLBC)
2048 (1 << 11) (0x800) audio g726 (G.726 RFC3551)
4096 (1 << 12) (0x1000) audio g722 (G722)
65536 (1 << 16) (0x10000) image jpeg (JPEG image)
131072 (1 << 17) (0x20000) image png (PNG image)
262144 (1 << 18) (0x40000) video h261 (H.261 Video)
524288 (1 << 19) (0x80000) video h263 (H.263 Video)
1048576 (1 << 20) (0x100000) video h263p (H.263+ Video)
2097152 (1 << 21) (0x200000) video h264 (H.264 Video)




On 11/11/2013 7:12 AM, David Gagnon wrote:
> Hi,
>
> I'm on a local network for the moment, no nat. I can get h.263 to work 
> no problem but not h.264. There is no firewall involved. It'S seem to 
> be related to h.264 for some reason.
>
> David
>
>
> On Sun, Nov 10, 2013 at 12:09 AM, || dave cantera Mobile 
> <davidjcantera at gmail.com <mailto:davidjcantera at gmail.com>> wrote:
>
>     david,
>     check the firewall settings for port blocking tcp/udp open both
>     ways for 10000-20000, sounds like router is not letting traffic
>     through
>
>
>     On 11/9/2013 7:56 PM, David Gagnon wrote:
>>     Hi,
>>
>>     I'm running Asterisk 11.6 and I'm unable to get h.264 to work
>>     with two Polycom VVX  500 running UC 5.0.1. If I enable h263 only
>>     in sip.conf it's working no problem but if I enable h.264 only
>>     it's not worning. I was able to get h.264 to work if I enable
>>     directmedia=yes. In my lab this is working but in production,
>>     both phone will be behind a different NAT. Have anyone been able
>>     to use h.264 passthrought with Asterisk 11 and directmedia=no ?
>>
>>     The problem is that that caller don't get the video from the
>>     callee but the callee get the video of the caller. It's sort of
>>     one-way video.
>>
>>     Thx !
>>
>>
>>
>
>
>     --
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>     asterisk-video mailing list
>     To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20131111/0abf567f/attachment-0001.html>