[Asterisk-video] Compiling the MCU

Khairul Nadzmi Mohd Yusof nadzmi at cybersecurity.my
Wed May 18 09:56:04 CDT 2011


anyone can help me?

Khairul Nadzmi b Mohd Yusof

Analyst, Secure Technology Services (STS)
Cyber Responsive Services
CyberSecurity Malaysia
An Agency Under the Ministry of Science, Technology & Innovation (MOSTI)

General Line : +603 8992 6888
Direct Line  : +603 8992 6967
General Fax  : +603 8945 3205
Mobile       : +601 2249 4416
Email        : nadzmi at cybersecurity.my

Website      : http://www.cybersecurity.my
  _____  

From: Khairul Nadzmi Mohd Yusof [mailto:nadzmi at cybersecurity.my]
To: Development discussion of video media support in Asterisk [mailto:asterisk-video at lists.digium.com]
Sent: Wed, 18 May 2011 08:51:17 +0800
Subject: Re: [Asterisk-video] Compiling the MCU

      Hi All,

While compiling i got another error, it seems that it cannot locate xmlrpc.h and also the xmlrpc-c folder which is being declared inside xmlrpcserver.h



#include <xmlrpc.h>  #include <xmlrpc-c/abyss.h>  #include <xmlrpc-c/server_abyss.h>

This is the compilation error


In file included from /usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:5:
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:3:20: error: xmlrpc.h: No such file or directory
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:4:26: error: xmlrpc_abyss.h: No such file or directory
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:12: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:26: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:27: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:28: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:29: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:30: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:33: error: âTSessionâ has not been declared
/usr/src/asterisk/mcu/media/include/xmlrpcserver.h:38: error: âTServerâ does not name a type
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp: In constructor âXmlRpcServer::XmlRpcServer(int)â:
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:18: error: âDateInitâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:21: error: âMIMETypeInitâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:27: error: âsrvâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:27: error: âDEFAULT_DOCSâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:27: error: âServerCreateâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:33: error: âServerDefaultHandlerâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:36: error: âServerInitâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp: In member function âint XmlRpcServer::Run()â:
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:67: error: âsrvâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:67: error: âServerRunâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp: At global scope:
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:98: error: âint XmlRpcServer::RequestHandlerâ is not a static member of âclass XmlRpcServerâ
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:98: error: âTSessionâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:98: error: expected primary-expression before âconstâ
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:99: error: expected â,â or â;â before â{â token
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:114: error: âint XmlRpcServer::DispatchRequestâ is not a static member of âclass XmlRpcServerâ
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:114: error: âTSessionâ was not declared in this scope
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:114: error: expected primary-expression before âconstâ
/usr/src/asterisk/mcu/media/src/xmlrpcserver.cpp:115: error: expected â,â or â;â before â{â token
make[1]: *** [xmlrpcserver.o] Error 1
make[1]: Leaving directory `/usr/src/asterisk/mcu/media'
make: *** [all] Error 2


Khairul Nadzmi b Mohd Yusof

Analyst, Secure Technology Services (STS)
Cyber Responsive Services
CyberSecurity Malaysia
An Agency Under the Ministry of Science, Technology & Innovation (MOSTI)

General Line : +603 8992 6888
Direct Line  : +603 8992 6967
General Fax  : +603 8945 3205
Mobile       : +601 2249 4416
Email        : nadzmi at cybersecurity.my

Website      : http://www.cybersecurity.my
  _____  

From: Sergio Garcia Murillo [mailto:sergio.garcia at fontventa.com]
To: Development discussion of video media support in Asterisk [mailto:asterisk-video at lists.digium.com]
Sent: Mon, 16 May 2011 18:00:22 +0800
Subject: Re: [Asterisk-video] Compiling the MCU

                                No, leave the FLASHSTREAMER set to "no"
      
      BR
      Sergio
      
      El 16/05/2011 11:48, nadzmi at cybersecurity.my escribió:                                

Thank you. Do gnash is required to be installed?
            - Via blackberry -
                            _____  

          

 ----- Original Message -----
              From: Sergio Garcia Murillo            [sergio.garcia at fontventa.com]
              Sent: 05/16/2011 11:44 AM ZE2
              To: Development discussion of video media support in            Asterisk <asterisk-video at lists.digium.com>
              Subject: Re: [Asterisk-video] Compiling the MCU
                  
        Change the
        
        SRCDIR          = /usr/local/src/mcu
        
        In the config.mk in your mcu directory.
        
        BR
        sergio
        
        El 16/05/2011 11:41, amit anand escribió:        Hi
          
          i dont remember exactly but you need to modify the makefile
          
          
On Mon, May 16, 2011 at 14:59, Khairul            Nadzmi Mohd Yusof <nadzmi at cybersecurity.my>            wrote:
                          
 Hi All,
                
                I was trying to compile the MCU, but i got this                compilation error during make. What did i miss? it seems                that it cannot locate the mcu.cpp to compile it to be                mcu.o . but the file is inside the src file. I'm not sure                what is the requirement for this mcu to be installed
                
                mkdir -p bin
                make -C media
                make[1]: Entering directory `/usr/src/asterisk/mcu/media'
                mkdir -p /usr/local/src/mcu/media/build/debug
                mkdir -p /usr/local/src/mcu/bin//debug
                make[1]: *** No rule to make target `mcu.o', needed by                `mcu'.  Stop.
                make[1]: Leaving directory `/usr/src/asterisk/mcu/media'
                make: *** [all] Error 2
                
                
                Khairul Nadzmi b Mohd Yusof
                
                Analyst, Secure Technology Services (STS)
                Cyber Responsive Services
                CyberSecurity Malaysia
                An Agency Under the Ministry of Science, Technology &                Innovation (MOSTI)
                
                General Line : +603 8992 6888
                Direct Line : +603 8992 6967
                General Fax : +603 8945 3205
                Mobile : +601 2249 4416
                Email : nadzmi at cybersecurity.my
                
                Website : http://www.cybersecurity.my
                
                  _____  

 Disclaimer:
                
  “This email (and any attachment to it) is confidential and intended solely for the use of the individual or entity to whom it is addressed. CyberSecurity Malaysia assumes no liability whatsoever for the content of this email or for the consequences of actions taken based on such content unless it is subsequently confirmed in writing. Unintended recipients are notified that disclosing, copying or distributing of this email, or acting based on its contents, is strictly prohibited; and you are to immediately and permanently delete or destroy this email and notify the sender forthwith.
                            
              --
  _____________________________________________________________________
              -- Bandwidth and Colocation Provided by http://www.api-digital.com --
              
              asterisk-video mailing list
              To UNSUBSCRIBE or update options visit:
                http://lists.digium.com/mailman/listinfo/asterisk-video
                                
          
          
          -- 
          

                    
Amit Anand          

                    
                
 +1 774 264-8024
                        
+91 9013223047          

                    
          

  --  _____________________________________________________________________  -- Bandwidth and Colocation Provided by http://www.api-digital.com --    asterisk-video mailing list  To UNSUBSCRIBE or update options visit:     http://lists.digium.com/mailman/listinfo/asterisk-video                
        
        
          _____  

        Disclaimer:
        
  “This email (and any attachment to it) is confidential and intended solely for the use of the individual or entity to whom it is addressed. CyberSecurity Malaysia assumes no liability whatsoever for the content of this email or for the consequences of actions taken based on such content unless it is subsequently confirmed in writing. Unintended recipients are notified that disclosing, copying or distributing of this email, or acting based on its contents, is strictly prohibited; and you are to immediately and permanently delete or destroy this email and notify the sender forthwith.
        

  --  _____________________________________________________________________  -- Bandwidth and Colocation Provided by http://www.api-digital.com --    asterisk-video mailing list  To UNSUBSCRIBE or update options visit:     http://lists.digium.com/mailman/listinfo/asterisk-video        

  --  _____________________________________________________________________  -- Bandwidth and Colocation Provided by http://www.api-digital.com --    asterisk-video mailing list  To UNSUBSCRIBE or update options visit:     http://lists.digium.com/mailman/listinfo/asterisk-video            
          
  
    _____  

  Disclaimer:
  
  “This email (and any attachment to it) is confidential and intended solely for the use of the individual or entity to whom it is addressed. CyberSecurity Malaysia assumes no liability whatsoever for the content of this email or for the consequences of actions taken based on such content unless it is subsequently confirmed in writing. Unintended recipients are notified that disclosing, copying or distributing of this email, or acting based on its contents, is strictly prohibited; and you are to immediately and permanently delete or destroy this email and notify the sender forthwith.
        


Disclaimer:

“This email (and any attachment to it) is confidential and intended solely for the use of the individual or entity to whom it is addressed. CyberSecurity Malaysia assumes no liability whatsoever for the content of this email or for the consequences of actions taken based on such content unless it is subsequently confirmed in writing. Unintended recipients are notified that disclosing, copying or distributing of this email, or acting based on its contents, is strictly prohibited; and you are to immediately and permanently delete or destroy this email and notify the sender forthwith.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20110518/a10a84bb/attachment-0001.htm>


More information about the asterisk-video mailing list