[Asterisk-video] asterisk-video Digest, Vol 58, Issue 12

pankaj pandey pankaj.niet at yahoo.com
Thu Feb 24 05:19:29 CST 2011


thanks for reply 
Sergio...

please find the attached log






   -- Executing [90xxxxxxxx at 3G:1]
h324m_call("SIP/100-b7421e80", "90xxxxxxxx at 3Gout") in new
stack

    -- Executing [90xxxxxxxx at 3Gout:1]
Set("Local/90xxxxxxxx at 3Gout-f57d,2",
"CHANNEL(transfercapability)=VIDEO") in new stack

    -- Executing [90xxxxxxxx at 3Gout:2]
NoOp("Local/90xxxxxxxx at 3Gout-f57d,2", "transfer=VIDEO") in
new stack

    -- Executing [90xxxxxxxx at 3Gout:3]
Set("Local/90xxxxxxxx at 3Gout-f57d,2",
"CHANNEL(userinformationlayer1)=38") in new stack

    -- Executing [90xxxxxxxx at 3Gout:4]
NoOp("Local/90xxxxxxxx at 3Gout-f57d,2", "ul1=38") in new
stack

    -- Executing [90xxxxxxxx at 3Gout:5]
Dial("Local/90xxxxxxxx at 3Gout-f57d,2", "ZAP/g1/90xxxxxxxx")
in new stack

-- Making new call for cr 32780

    -- digital call,
setting user information layer 1 to 38 (0x26)

    -- Requested
transfer capability: 0x18 - VIDEO

> Protocol Discriminator: Q.931 (8)  len=36

> Call Ref: len= 2 (reference 12/0xC) (Originator)

> Message type: SETUP (5)

> [04 03 88 90 a6]

> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0 
Info transfer capability: Unrestricted digital information (8)

>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)

>                                User
information layer 1: H.223 and H.245 (38)

> [18 03 a9 83 81]

> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI 
Spare: 0  Exclusive  Dchan: 0

>                       
ChanSel: Reserved

>                      
Ext: 1  Coding: 0  Number Specified  Channel Type: 3

>                      
Ext: 1  Channel: 1 ]

> [6c 05 21 80 31 30 30]

> Calling Number (len= 7) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan
(E.164/E.163) (1)

>                           Presentation:
Presentation permitted, user number not screened (0)  '100' ]

> [70 0b 80 39 30 31 33 36 38 34 32 39 33]

> Called Number (len=13) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)  '90xxxxxxxx' ]

> [a1]ost*CLI>

> Sending Complete (len= 1)

q931.c:3245 q931_setup: call 32780 on channel 1 enters state
1 (Call Initiated)

    -- Called g1/90xxxxxxxx

< Protocol Discriminator: Q.931 (8)  len=10

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: CALL PROCEEDING (2)

< [18 03 a9 83 81]

< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI 
Spare: 0  Exclusive  Dchan: 0

<                       
ChanSel: Reserved

<                      
Ext: 1  Coding: 0  Number Specified  Channel Type: 3

<                      
Ext: 1  Channel: 1 ]

-- Processing IE 24 (cs0, Channel Identification)

q931.c:3800 q931_receive: call 32780 on channel 1 enters
state 3 (Outgoing call  Proceeding)

    -- Zap/1-1 is
proceeding passing it to Local/90xxxxxxxx at 3Gout-f57d,2

< Protocol Discriminator: Q.931 (8)  len=9

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: PROGRESS (3)

< [1e 02 8a 84]

< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0 
Location: Network beyond the interworking point (10)

<                               Ext: 1 
Progress Description: Unknown (4) ]

-- Processing IE 30 (cs0, Progress Indicator)

    -- Zap/1-1 is
making progress passing it to Local/90xxxxxxxx at 3Gout-f57d,2

< Protocol Discriminator: Q.931 (8)  len=5

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: ALERTING (1)

q931.c:3715 q931_receive: call 32780 on channel 1 enters
state 4 (Call Delivered)

    -- Zap/1-1 is
ringing

< Protocol Discriminator: Q.931 (8)  len=12

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: CONNECT (7)

< [29 05 0b 02 18 0f 25]

< Time Date (len= 7) [ 11-02-24 15:37 ]

-- Processing IE 41 (cs0, Date/Time)

q931.c:3745 q931_receive: call 32780 on channel 1 enters
state 10 (Active)

> Protocol Discriminator: Q.931 (8)  len=5

> Call Ref: len= 2 (reference 12/0xC) (Originator)

> Message type: CONNECT ACKNOWLEDGE (15)

    -- Zap/1-1
answered Local/90xxxxxxxx at 3Gout-f57d,2

  == Spawn extension
(3Gout, 90xxxxxxxx, 5) exited non-zero on 'Local/90xxxxxxxx at 3Gout-f57d,2'

< Protocol Discriminator: Q.931 (8)  len=9

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: DISCONNECT (69)

< [08 02 80 90]

< Cause (len= 4) [ Ext: 1 
Coding: CCITT (ITU) standard (0) 
Spare: 0  Location: User (0)

<                 
Ext: 1  Cause: Normal Clearing
(16), class = Normal Event (1) ]

-- Processing IE 8 (cs0, Cause)

q931.c:3935 q931_receive: call 32780 on channel 1 enters
state 12 (Disconnect Indication)

    -- Channel 0/1,
span 1 got hangup request, cause 16

NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect
Indication, peerstate Disconnect Request

q931.c:3068 q931_release: call 32780 on channel 1 enters
state 19 (Release Request)

> Protocol Discriminator: Q.931 (8)  len=9

> Call Ref: len= 2 (reference 12/0xC) (Originator)

> Message type: RELEASE (77)

> [08 02 81 90]

> Cause (len= 4) [ Ext: 1 
Coding: CCITT (ITU) standard (0) 
Spare: 0  Location: Private
network serving the local user (1)

>                 
Ext: 1  Cause: Normal Clearing
(16), class = Normal Event (1) ]

    -- Hungup 'Zap/1-1'

  == Auto fallthrough,
channel 'SIP/100-b7421e80' status is 'UNKNOWN'

< Protocol Discriminator: Q.931 (8)  len=5

< Call Ref: len= 2 (reference 12/0xC) (Terminator)

< Message type: RELEASE COMPLETE (90)

q931.c:3875 q931_receive: call 32780 on channel 1 enters
state 0 (Null)

NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null,
peerstate Null

NEW_HANGUP DEBUG: Destroying the call, ourstate Null,
peerstate Null

--- On Thu, 24/2/11, asterisk-video-request at lists.digium.com <asterisk-video-request at lists.digium.com> wrote:

From: asterisk-video-request at lists.digium.com <asterisk-video-request at lists.digium.com>
Subject: asterisk-video Digest, Vol 58, Issue 12
To: asterisk-video at lists.digium.com
Date: Thursday, 24 February, 2011, 3:48 AM

Send asterisk-video mailing list submissions to
    asterisk-video at lists.digium.com

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.digium.com/mailman/listinfo/asterisk-video
or, via email, send a message with subject or body 'help' to
    asterisk-video-request at lists.digium.com

You can reach the person managing the list at
    asterisk-video-owner at lists.digium.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-video digest..."


Today's Topics:

   1. Re: video obd call |h324m gw (sudhir mor)
   2. Re: video obd call |h324m gw (Sergio Garcia Murillo)


----------------------------------------------------------------------

Message: 1
Date: Thu, 24 Feb 2011 13:57:57 +0530 (IST)
From: sudhir mor <sudhir_mor2000 at yahoo.com>
Subject: Re: [Asterisk-video] video obd call |h324m gw
To: Development discussion of video media support in Asterisk
    <asterisk-video at lists.digium.com>
Message-ID: <711770.75556.qm at web94816.mail.in2.yahoo.com>
Content-Type: text/plain; charset="utf-8"

Hi Pankaj,

Please follow help from this link
https://issues.asterisk.org/view.php?id=10189
?
Sudhir Mor
Senior Developer
Voicetap Technologies
Mobile : +91-9891318796 
________________________________





________________________________
From: pankaj pandey <pankaj.niet at yahoo.com>
To: asterisk-video at lists.digium.com
Sent: Thu, 24 February, 2011 1:35:02 PM
Subject: [Asterisk-video] video obd call |h324m gw


Hi everyone,
?
My first scenario 
3G phone -> asterisk(h324m gw)->sip
Is working fine.
?
when I try a video OBD from sip
i.e.
SIP -> asterisk(h324m gw)-> 3G phone
?
Video OBD call is originated at 3G phone end and it is shows as video call, but 
when I picking the call it shows an ?Unknown Error? and call cut with ?hangup 
request, cause 16..
?
below is the dial-plan and cli log.
?
?
please suggest the way forward...
?
?
?
[3G]
exten =>? _X.,1,h324m_call(${EXTEN}@3Gout)
?
[3Gout]
exten =>? _X.,1,Set(CHANNEL(transfercapability)=VIDEO)
exten =>? _X.,2,NoOp(transfer=${CHANNEL(transfercapability)})
exten =>? _X.,3,Set(CHANNEL(userinformationlayer1)=38)
exten =>? _X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)})
exten =>? _X.,n,Dial(ZAP/g1/${EXTEN})
?
?
- Executing [93xxxxxxxx at 3G:1] h324m_call("SIP/100-096dc4a0", "93xxxxxxxx at 3Gout") 
in new stack
??? -- Executing [93xxxxxxxx at 3Gout:1] Set("Local/93xxxxxxxx at 3Gout-ad7c,2", 
"CHANNEL(transfercapability)=VIDEO") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:2] NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", 
"transfer=VIDEO") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:3] Set("Local/93xxxxxxxx at 3Gout-ad7c,2", 
"CHANNEL(userinformationlayer1)=38") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:4] NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", 
"ul1=38") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:5] Dial("Local/93xxxxxxxx at 3Gout-ad7c,2", 
"ZAP/g1/93xxxxxxxx") in new stack
??? -- digital call, setting user information layer 1 to 38 (0x26)
??? -- Requested transfer capability: 0x18 - VIDEO
??? -- Called g1/93xxxxxxxx
??? -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
??? -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
??? -- Zap/1-1 is ringing
??? -- Zap/1-1 answered Local/93xxxxxxxx at 3Gout-ad7c,2
? == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on 
'Local/93xxxxxxxx at 3Gout-ad7c,2'
??? -- Channel 0/1, span 1 got hangup request, cause 16
??? -- Hungup 'Zap/1-1'

Thanks,
Pankaj 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/b6308506/attachment-0001.htm>

------------------------------

Message: 2
Date: Thu, 24 Feb 2011 09:47:00 +0100
From: Sergio Garcia Murillo <sergio.garcia at fontventa.com>
Subject: Re: [Asterisk-video] video obd call |h324m gw
To: Development discussion of video media support in Asterisk
    <asterisk-video at lists.digium.com>
Message-ID: <4D661B04.3080300 at fontventa.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"


Enable debug on asterisk and attach log again

Best regards
Sergio

El 24/02/2011 9:05, pankaj pandey escribi?:
>
> Hi everyone,
>
> My first scenario
>
> 3G phone -> asterisk(h324m gw)->sip
>
> Is working fine.
>
> when I try a video OBD from sip
>
> i.e.
>
> SIP -> asterisk(h324m gw)-> 3G phone
>
> Video OBD call is originated at 3G phone end and it is shows as video 
> call, but when I picking the call it shows an ?Unknown Error? and call 
> cut with hangup request, cause 16..
>
> below is the dial-plan and cli log.
>
> please suggest the way forward...
>
> [3G]
>
> exten =>_X.,1,h324m_call(${EXTEN}@3Gout)
>
> [3Gout]
>
> exten =>_X.,1,Set(CHANNEL(transfercapability)=VIDEO)
>
> exten =>_X.,2,NoOp(transfer=${CHANNEL(transfercapability)})
>
> exten =>_X.,3,Set(CHANNEL(userinformationlayer1)=38)
>
> exten =>_X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)})
>
> exten =>_X.,n,Dial(ZAP/g1/${EXTEN})
>
> - Executing [93xxxxxxxx at 3G:1] h324m_call("SIP/100-096dc4a0", 
> "93xxxxxxxx at 3Gout") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:1] Set("Local/93xxxxxxxx at 3Gout-ad7c,2", 
> "CHANNEL(transfercapability)=VIDEO") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:2] 
> NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", "transfer=VIDEO") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:3] Set("Local/93xxxxxxxx at 3Gout-ad7c,2", 
> "CHANNEL(userinformationlayer1)=38") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:4] 
> NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", "ul1=38") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:5] 
> Dial("Local/93xxxxxxxx at 3Gout-ad7c,2", "ZAP/g1/93xxxxxxxx") in new stack
>
> -- digital call, setting user information layer 1 to 38 (0x26)
>
> -- Requested transfer capability: 0x18 - VIDEO
>
> -- Called g1/93xxxxxxxx
>
> -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
>
> -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
>
> -- Zap/1-1 is ringing
>
> -- Zap/1-1 answered Local/93xxxxxxxx at 3Gout-ad7c,2
>
> == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on 
> 'Local/93xxxxxxxx at 3Gout-ad7c,2'
>
> -- Channel 0/1, span 1 got hangup request, cause 16
>
> -- Hungup 'Zap/1-1'
>
>
>
> Thanks,
> Pankaj
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-video

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/bb14a1fb/attachment.htm>

------------------------------

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video

End of asterisk-video Digest, Vol 58, Issue 12
**********************************************


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/a64d7c0f/attachment-0001.htm>


More information about the asterisk-video mailing list