[Asterisk-video] Simulate a 3G-324M video call

[huu giang]

Hi,

Can you guide me step by step how to create a loopback test or share my any link 
about this topic ?.
I can't google anything about this topic.

Thanks




________________________________
From: Klaus Darilion <klaus.mailinglists at pernau.at>
To: huu giang <huugiang104 at yahoo.com>
Cc: Development discussion of video media support in Asterisk 
<asterisk-video at lists.digium.com>
Sent: Thu, October 14, 2010 2:24:48 PM
Subject: Re: [Asterisk-video] Simulate a 3G-324M video call



Am 14.10.2010 03:20, schrieb huu giang:
> Hi schrieb,
> Do you mean 2 card (earch card one E1 port) on the same server, or just
> a card which have 2 E1 ports ?

Both would work.

> What about an E1 loopback cable ?.

Just google for it - e.g.
http://wiki.sangoma.com/Cablepinouts#t1_e1_cross

klaus


> Thanks
>
>
> ------------------------------------------------------------------------
> *From:* Klaus Darilion <klaus.mailinglists at pernau.at>
> *To:* Development discussion of video media support in Asterisk
> <asterisk-video at lists.digium.com>
> *Cc:* huu giang <huugiang104 at yahoo.com>
> *Sent:* Wed, October 13, 2010 10:40:16 PM
> *Subject:* Re: [Asterisk-video] Simulate a 3G-324M video call
>
>
>
> Am 13.10.2010 09:47, schrieb huu giang:
>  > Hi all,
>  > I want to simulate a 3G-324M video call and want to do as the
> following way:
>  > I plan to use 2 servers, each sever will be installed Asterisk and a
>  > Digium or Sangoma card on its board. And then 2 servers wiil be
>  > connected to each other through an E1 line.
>  > I wiil use a Sip Phone (for examle Xlite or Kapanga), configure it to
>  > use 3G-324M codec and make a video call to Asterisk installed on the
>  > first server, can Asterisk forward the video call to the secondary
>  > server through E1 line, so the Asterisk on the second server will
>  > recevie the call as a 3G-324M video call ?
>  > Is it possible ?. Anyone do it ?
>
> Yes. You do not even need 2 server - you can also use one server with 2
> E1 ports and E1 loopback cable.
>
> regards
> Klaus
>
>  > Many thanks,
>  > Giang.
>  >
>



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20101018/6084feff/attachment.htm