[Asterisk-video] h324m outbound call - no user information layer 1 in bearer

[Klaus Darilion]

Hi Dawid!

I just verified your Dialplan with my running installation and the 
dialplan is OK.

My Asterisk has the following patches applied:

libpri 1.4.4:
http://bugs.digium.com/view.php?id=13055

asterisk 1.4.21.1:
http://bugs.digium.com/view.php?id=10217
http://bugs.digium.com/view.php?id=12134
AMR patch

In zapata.conf use "h324m=" bc (default) or lcc.

regards
Klaus


Am 23.02.2010 16:00, schrieb Dawid:
> I got problem with outbound video calls. There is no 'user information
> layer 1' centent in Bearer Capability header, but i know that should be
> something like this: 'User information layer 1: H.223/H.245 Multimedia
> (38)'.
> The LLC header is unnecessary becouse my GSM operator supports only
> Bearer. Incoming 3g calls working great.
>
> I've got Asterisk 1.4.22 with llc path, llc patched libpri and Sangoma
> A104d QUAD T1/E1 AFT card.
>
>
> My extensions.conf:
>
> [from-local]
> exten =>  _X.,1,h324m_call(${EXTEN}@3Gout)
>
> [3Gout]
> exten =>  _X.,1,Set(CHANNEL(transfercapability)=VIDEO)
> exten =>  _X.,2,NoOp(transfer=${CHANNEL(transfercapability)})
> exten =>  _X.,3,Set(CHANNEL(userinformationlayer1)=38)
> exten =>  _X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)})
> exten =>  _X.,5,Dial(Zap/g0/${EXTEN})
>
> [from-pstn]
> exten =>  _X.,1,h324m_gw(${EXTEN}@video)
>
> [video]
> exten =>  _X.,1,Dial(SIP/${EXTEN})
>
>
> CLI messages:
>
> e1-1*CLI>
>
>
>       -- Executing [534543545 at from-sip:1]
> h324m_call("SIP/21222212-08286f90", "534543545 at 3Gout") in new stack
>
>       -- Executing [534543545 at 3Gout:1]
> Set("Local/534543545 at 3Gout-8419,2", "CHANNEL(transfercapability)=VIDEO")
> in new stack
>       -- Executing [534543545 at 3Gout:2]
> NoOp("Local/534543545 at 3Gout-8419,2", "transfer=VIDEO") in new stack
>
>       -- Executing [534543545 at 3Gout:3]
> Set("Local/534543545 at 3Gout-8419,2", "CHANNEL(userinformationlayer1)=38")
> in new stack
>       -- Executing [534543545 at 3Gout:4]
> NoOp("Local/534543545 at 3Gout-8419,2", "ul1=38") in new stack
>
>       -- Executing [534543545 at 3Gout:5]
> Dial("Local/534543545 at 3Gout-8419,2", "Zap/g0/534543545") in new stack
>
> -- Making new call for cr 32773
>
>
>       -- digital call, setting user information layer 1 to 38 (0x26)
>
>
>       -- dahdi call: h324musellc=0, ast->userinformationlayer1=38
>
>
>       -- Requested transfer capability: 0x18 - VIDEO
>
>
>   >  Protocol Discriminator: Q.931 (8)  len=40
>
>
>   >  Call Ref: len= 2 (reference 5/0x5) (Originator)
>
>
>   >  Message type: SETUP (5)
>
>
>   >  [04 02 88 90]I>
>
>
>   >  Bearer Capability (len= 4) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: Unrestricted digital information (8)
>
>   >                               Ext: 1  Trans mode/rate: 64kbps,
> circuit-mode (16)
>
>   >  [18 03 a9 83 81]
>
>
>   >  Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0
> Exclusive  Dchan: 0
>
>   >                         ChanSel: As indicated in following octets
>
>
>   >                        Ext: 1  Coding: 0  Number Specified  Channel
> Type: 3
>
>   >                        Ext: 1  Channel: 1 ]
>
>
>   >  [6c 0b 21 80 37 32 39 31 30 36 33 36 36]
>
>
>   >  Calling Number (len=13) [ Ext: 0  TON: National Number (2)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>
>   >                            Presentation: Presentation permitted, user
> number not screened (0)  '21222212' ]
>
>   >  [70 0a a1 35 33 34 35 34 33 35 34 35]
>
>
>   >  Called Number (len=12) [ Ext: 1  TON: National Number (2)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '534543545' ]
>
>   >  [a1]e-e1-1*CLI>
>
>
>   >  Sending Complete (len= 1)
> q931.c:3326 q931_setup: call 32773 on channel 1 enters state 1 (Call
> Initiated)
>       -- Called g0/534543545
> <  Protocol Discriminator: Q.931 (8)  len=10
> <  Call Ref: len= 2 (reference 5/0x5) (Terminator)
> <  Message type: CALL PROCEEDING (2)
> <  [18 03 a9 83 81]
> <  Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0
> Exclusive  Dchan: 0
> <                         ChanSel: As indicated in following octets
> <                        Ext: 1  Coding: 0  Number Specified  Channel Type: 3
> <                        Ext: 1  Channel: 1 ]
> -- Processing IE 24 (cs0, Channel Identification)
> q931.c:3883 q931_receive: call 32773 on channel 1 enters state 3
> (Outgoing call  Proceeding)
>       -- Zap/1-1 is proceeding passing it to Local/534543545 at 3Gout-8419,2
> <  Protocol Discriminator: Q.931 (8)  len=9
> <  Call Ref: len= 2 (reference 5/0x5) (Terminator)
> <  Message type: DISCONNECT (69)
>
>
> e1-1*CLI>  dahdi show channel 1
> Channel: 1-1*CLI>
> File Descriptor: 15
> Span: 1
> Extension:
> Dialing: no
> Context: from-pstn
> Caller ID: 732343433
> Calling TON: 33
> Caller ID name:
> Destroy: 0
> InAlarm: 0
> Signalling Type: ISDN PRI
> Radio: 0
> Owner:<None>
> Real:<None>
> Callwait:<None>
> Threeway:<None>
> Confno: -1
> Propagated Conference: -1
> Real in conference: 0
> DSP: no
> Relax DTMF: yes
> Dialing/CallwaitCAS: 0/0
> Default law: alaw
> Fax Handled: no
> Pulse phone: no
> Echo Cancellation: 0 taps unless TDM bridged, currently OFF
> PRI Flags:
> PRI Logical Span: Implicit
> H324M Signalling: use 'Bearer Capability' IE
> Hookstate (FXS only): Onhook
>
>
> ----------------------------------------------------------------------
> Codziennie 11 tys. ofert pracy
> Sprawdz>>>  http://link.interia.pl/f25ac
>
>