[Asterisk-video] Regd: command stops executing

[jack nicolson]

Hi Klaus,

Its working now I can see the video but audio is not coming. In asterisk log
its saying.

"NOTICE[5485]: channel.c:2272 __ast_read: Dropping incompatible voice frame
on Local/1 at vxml-d45b,1 of format ulaw since our native format has changed to
unknown"

my video file codec are as below.
mp4info version 1.5.0.1
xxxx.3gp:
Track   Type    Info
1       audio   G.711 uLaw, 3.640 secs, 64 kbps, 8000 Hz
2       hint    Payload PCMU for track 1
3       video   H.263, 1.234 secs, 200 kbps, 176x144 @ 29.983793 fps
4       hint    Payload H263-2000 for track 3
 Metadata Tool: mp4creator 1.5.0.1



Another issue is I am trying to connect my asterisk server locally with my
nokia N81 (version:v 10.0.0.35 RM-223) using wlan but I am getting
registration failure error.

Below are my sip setting for the mobile as many mentioned in different sites
that it works.
profilename:SIPtest.
serviceprofile:IETF
Default access point: <mywifipoint>
public user name: xxxx@<asteriskserverIP>
use compression: No
Registration: Always on
Use Security: No
  Proxy server
proxy server address:192.168.x.x<asterisk server IP>
Realm: asterisk
UserName:xxxx
Password:xxxx123
Allow loose routing: yes
Transport type: UDP
Port:5060

Registrar server address

registrar server address:192.168.x.x<asterisk serverIP>
Realm: asterisk
UserName:xxxx
Password:xxxx123
Allow loose routing: yes
Transport type: UDP
Port:5060

then I created profile in internet telephone with the above sip setting.

Do I need to install updates for the mobile and software like *SIP*VOIP
setting software.

I am sorry if the above issue not related to the forum. please discard
it.<http://sw.nokia.com/id/d61bd0ec-1304-45dd-9283-63d631cb86b1/SIP_VoIP_Settings_v1_2_en.sis>

Thanks,

Jack




On Thu, Mar 5, 2009 at 3:49 PM, Klaus Darilion <klaus.mailinglists at pernau.at
> wrote:

> post the asterisk console during an incoming call with
>  > pri debug span 1 (or whatever span you use)
>  > set verbose 9
>  > set debug 9
>
>
> regards
> klaus
>
>
> jack nicolson schrieb:
> >     Hi,
> >
> >     Just now in my city 3g service is implemented so I started looking
> >     for IVVR stuff.  Anyway my   asterisk video issue is.
> >
> >
> >     I followed your instruction for video call as given below.
> >
> >
> http://www.allasterisk.com/lists/asterisk-video@lists.digium.com/2007-09/msg00125.html
> >
> >
> >     However I am able to connect to my server the command
> >     h324m_gw_answer when executed. it remain in that state only and not
> >     proceeding to next step. after few minutes I need to hang the call.
> >
> >
> >     below is my asterisk log
> >
> >      Going to extension s|1 because of immediate=yes
> >        -- Accepting call from '9xxxxxxxxx' to 's' on channel 0/11, span 1
> >        -- Executing [s at incoming:1] Answer("Zap/11-1", "") in new stack
> >        -- Executing [s at incoming:2] h324m_gw("Zap/11-1", "1 at vxml") in new
> >     stack
> >        -- Executing [1 at vxml:1] h324m_gw_answer("Local/1 at vxml-768d,2",
> >     "") in new stack
> >
> >
> >
> >     I want to know how long it will take for  3G negotiation or is there
> >     any other issue.
> >
> >
> > I am connected to PRI E1 line
> >
> > Thanks,
> >
> > Jack
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-video
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-video
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20090306/ee285d47/attachment.htm