[Asterisk-video] Fw: Outbound video Calls

[Klaus Darilion]

Asterisk Users schrieb:
> Hi,
> 
> I have applied that patch, and the libpri one as well.
> 
> I did an intense debug on an incoming and outgoing call, neither of them 

please no "intense", only the Q931 is interresting.

> show an LCC, however the incoming call does not have User information layer 
> 1 in bearer capability ?

strange. At least for outgoing calls you need to set UL1 as otherwise 
the mobile (and the mobile operator) does not know that the incoming 
call is an video call.

Use: zap show channel 1 (or any other channel on this trunk). You should 
see a line like:
   H324M Signalling: use 'Low Layer Compatibility' IE

If you do not have the "H324M Signalling" line then the patch is not 
properly applied. If you do have this line but it says "Bearer 
Capability" then you do not have configured it correctly.

If sending H324M in LCC or sending in both then I do not know how to 
solve this issue - then I suspect your telco blocks it somewhere.

regards
klaus