[Asterisk-video] announcing bandwidth in SDP

[Sergio Garcia Murillo]

Great, but does EyeBeam comfom the strictly the traffic to the desired bandwith??

I'll be very interested in knowing the results, if you got a video recorded that way send it to me, I'll try to take a look at the video stream to see how "good" it's for directly using it with the videocall.

Best regards
Sergio

----- Original Message -----
From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
To: asterisk-video at lists.digium.com
Sent: Thu, 17 Jan 2008 12:17:35 +0100
Subject: Re: [Asterisk-video] announcing bandwidth in SDP

Klaus Darilion schrieb:
> Hi!
> 
> Is there an Asterisk version (trunk, videocaps branch ...) which allows 
> to signal the maximum video bandwidth (e.g. b= or a=fmtp:...MaxBR=)


Answering myself: there is maxcallbitrate in sip.conf. It adds b=CS: to 
global section of SDP.

Looks like it is ignored by eyebeam, which uses MaxBr setting in a=ftmp 
line which was defined in a rather old SDP draft.

regards
klaus

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video