[Asterisk-video] Trouble making outbound h324m video call
Klaus Darilion
klaus.mailinglists at pernau.at
Wed Jan 2 04:31:00 CST 2008
Hi Rene!
Do you have a pri debug dump of an incoming H324M call?
klaus
Rene van Weert schrieb:
> Dear Klaus,
>
> Here is the pri debug dump:
>
>
> [Dec 24 16:28:05] VERBOSE[4445] logger.c: NEW_HANGUP DEBUG: Destroying
> the call, ourstate Null, peerstate Null
>
> [Dec 24 16:28:06] VERBOSE[7206] logger.c: -- Executing [665 at from-sip:1]
> h324m_call("SIP/2000-082158d8", "666 at test") in new stack
>
> [Dec 24 16:28:06] DEBUG[7206] app_h324m.c: h324m_call
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:1]
> Set("Local/666 at test-bb08,2", "CHANNEL(transfercapability)=VIDEO") in new
> stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:2]
> Set("Local/666 at test-bb08,2", "CALLERID(NUM)=367111999") in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:3]
> NoOp("Local/666 at test-bb08,2", "transfer=VIDEO") in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:4]
> Set("Local/666 at test-bb08,2", "CHANNEL(userinformationlayer1)=38") in new
> stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:5]
> NoOp("Local/666 at test-bb08,2", "ul1=38") in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666 at test:6]
> Dial("Local/666 at test-bb08,2", "Zap/g1/06150XXXX") in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Making new call for cr 32771
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- digital call, setting user
> information layer 1 to 38 (0x26)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Requested transfer
> capability: 0x18 - VIDEO
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Protocol Discriminator:
> Q.931 (8) len=42
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Call Ref: len= 2 (reference
> 3/0x3) (Originator)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Message type: SETUP (5)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [04 03 88 90 a6]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Bearer Capability (len= 5) [
> Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital
> information (8)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Trans mode/rate:
> 64kbps, circuit-mode (16)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 User information
> layer 1: H.223 and H.245 (38)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [18 03 a9 83 81]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Channel ID (len= 5) [ Ext: 1
> IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > ChanSel: Reserved
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Coding: 0 Number
> Specified Channel Type: 3
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Channel: 1 ]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [6c 0b 41 81 33 36 37 31 31
> 31 39 39 39]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Calling Number (len=13) [
> Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan
> (E.164/E.163) (1)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Presentation: Presentation
> permitted, user number passed network screening (1) '367111999' ]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [70 0b c1 30 36 31 35 30 36
> 34 30 38 30]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Called Number (len=13) [
> Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan
> (E.164/E.163) (1) '061506XXXX' ]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [a1]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Sending Complete (len= 1)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: q931.c:2881 q931_setup: call
> 32771 on channel 1 enters state 1 (Call Initiated)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Called g1/061506XXXX
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Protocol Discriminator:
> Q.931 (8) len=10
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Call Ref: len= 2 (reference
> 3/0x3) (Terminator)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Message type: RELEASE
> COMPLETE (90)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < [08 03 80 e4 04]
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Cause (len= 5) [ Ext: 1
> Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Ext: 1 Cause: Invalid
> information element contents (100), class = Protocol Error (e.g. unknown
> message) (6) ]
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Cause data 1: 04 (4)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: -- Processing IE 8 (cs0, Cause)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: q931.c:3503 q931_receive: call
> 32771 on channel 1 enters state 0 (Null)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: -- Channel 0/1, span 1 got
> hangup, cause 100
>
> [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Set option AUDIO MODE, value:
> ON(1) on Zap/1-1
>
> [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Already hungup... Calling
> hangup once, and clearing call
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: NEW_HANGUP DEBUG: Calling
> q931_hangup, ourstate Null, peerstate Null
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: NEW_HANGUP DEBUG: Destroying
> the call, ourstate Null, peerstate Null
>
> [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Set option AUDIO MODE, value:
> OFF(0) on Zap/1-1
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Hungup 'Zap/1-1'
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: == Everyone is busy/congested
> at this time (1:0/0/1)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: == Auto fallthrough, channel
> 'Local/666 at test-bb08,2' status is 'CHANUNAVAIL'
>
> [Dec 24 16:28:06] VERBOSE[7206] logger.c: == Spawn extension (from-sip,
> 665, 1) exited non-zero on 'SIP/2000-082158d8'
>
> Hope this helps...
> Thanks! Ohw and of course a very happy christmas to you and everyone
> else reading this! Enjoy!
>
> René
>
> On Dec 20, 2007 10:07 AM, Klaus Darilion <klaus.mailinglists at pernau.at
> <mailto:klaus.mailinglists at pernau.at>> wrote:
>
> Hi Rene!
>
> Do incoming h324m call work?
>
> Could you provide q931 dumps of the incoming and the outgoing call?
> (use
> "pri debug span x" x is your span)
>
> regards
> klaus
>
> Rene van Weert schrieb:
> > Hey everyone,
> >
> > I'm trying to make an outbound call using h324m_call but I keep
> getting
> > stuck with the following error:
> >
> > -- Executing [665 at from-sip:1] h324m_call("SIP/2000-08214978",
> > "666 at test <mailto:666 at test <mailto:666 at test>>") in new stack
> > -- Executing [666 at test:1] Set(" Local/666 at test-89ed,2
> > <mailto:Local/666 at test-89ed <mailto:Local/666 at test-89ed>,2>",
> "CHANNEL(transfercapability)=VIDEO") in
> > new stack
> > -- Executing [666 at test:2] NoOp("Local/666 at test-89ed,2
> > <mailto:Local/666 at test-89ed <mailto:Local/666 at test-89ed>,2>",
> "transfer=VIDEO") in new stack
> > -- Executing [666 at test:3] Set("Local/666 at test-89ed,2
> > <mailto:Local/666 at test-89ed <mailto:Local/666 at test-89ed>,2>",
> "CHANNEL(userinformationlayer1)=38") in
> > new stack
> > -- Executing [666 at test:4] NoOp(" Local/666 at test-89ed,2
> > <mailto:Local/666 at test-89ed <mailto:Local/666 at test-89ed>,2>",
> "ul1=38") in new stack
> > -- Executing [666 at test:5] Dial("Local/666 at test-89ed,2
> > <mailto:Local/666 at test-89ed <mailto:Local/666 at test-89ed>,2>",
> "Zap/g1/0x") in new stack
> > -- digital call, setting user information layer 1 to 38 (0x26)
> > -- Requested transfer capability: 0x18 - VIDEO
> > -- Called g1/06xxxx
> > * -- Channel 0/2, span 1 got hangup, cause 100
> > * -- Hungup 'Zap/2-1'
> > Cause 100 means the following on a page of isdn cause codes i found:
> >
> > *Cause No. 100 - Invalid information element contents.*
> > This cause indicates that the equipment sending this cause has
> received
> > and information element which it has implemented; however, one or
> more
> > of the fields in the information element are coded in such a way
> which
> > has not been implemented by the equipment sending this cause.
> >
> > What it means:
> > Like cause 1 and cause 88, this usually indicates that the ISDN
> number
> > being dialed is in a format that is not understood by the equipment
> > processing the call. SPIDs will sometimes fail to initialize with a
> > Cause 100, or a call will fail with this cause.
> >
> > Can anyone help me in resolving this problem?
> > I am running Asterisk 1.4.15 with Digium TE110P 1 span on a KPN (also
> > tried MCI) E1 line.
> >
> > If any more info needed please let me know.
> >
> > Thanks and cheers!
> > René van Weert
> >
> >
> >
> ------------------------------------------------------------------------
>
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by
> http://www.api-digital.com-- <http://www.api-digital.com--/>
> >
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-video
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> <http://www.api-digital.com--/>
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
More information about the asterisk-video
mailing list