[Asterisk-video] (no subject)

[Nico Gundacker]

Here is a part of what eyebeam is logging. I do not know how to check the
sending of RTP in any other way, except using some special
package-analyzing-software, which is analyzing the hole traffic at the
network.

[08-04-30]09:14:00.624 | Info | Conferencing | "Receiving video frame on
stream 00000047" | sua::CVideoConferencingManager::OnIncomingVideoFrame
[08-04-30]09:14:00.624 | Warning | Conferencing | "Unable to locate stream
71" | sua::CVideoConferencingManager::OnIncomingVideoFrame
[08-04-30]09:14:00.624 | Debug | Video | "Drawing I420 secondary surface" |
sua::CDirectXVideoFrameRenderer::DrawI420orIYUVSurface
[08-04-30]09:14:00.624 | Debug | Video | "Result of blit to primary surface
is 0" | sua::CDirectXVideoFrameRenderer::BlitImageToPrimarySurface
[08-04-30]09:14:00.625 | Debug | Jitter | "Packet hold time is: 41 avg
latency: 38.9856 seq: 45686" | sua::CJitterBuffer::DeliverPacket
[08-04-30]09:14:00.625 | Info | Audio | "Adding 160 samples to latency
reducer" | sua::CAudioManager::DeliverIncomingData

-----Ursprüngliche Nachricht-----
Von: asterisk-video-bounces at lists.digium.com
[mailto:asterisk-video-bounces at lists.digium.com] Im Auftrag von Klaus
Darilion
Gesendet: Dienstag, 29. April 2008 16:40
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] (no subject)

Nico Gundacker wrote:
> You are right, when I use express-talk with the same videos there are no
> such error-reports as there are shown with x-lite. But still there is no
> video shown on both sip-phones.

Does Asterisk send video RTP packets to the SIP client?

regards
klaus


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video