[Asterisk-video] Trouble making outbound h324m video call

[Rene van Weert]

Dear Klaus,

I added the line to zapata.conf as you mentioned. However I still get the
same result:

    -- Executing [665 at from-sip:1] h324m_call("SIP/2000-0823bb08", "666 at test")
in new stack
    -- Executing [666 at test:1] Set("Local/666 at test-23e7,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
    -- Executing [666 at test:2] NoOp("Local/666 at test-23e7,2",
"transfer=VIDEO") in new stack
    -- Executing [666 at test:3] Set("Local/666 at test-23e7,2",
"CHANNEL(userinformationlayer1)=38") in new stack
    -- Executing [666 at test:4] NoOp("Local/666 at test-23e7,2", "ul1=38") in new
stack
    -- Executing [666 at test:5] Dial("Local/666 at test-23e7,2",
"ZAP/g0/06xxxxxxxx") in new stack
-- Making new call for cr 32772
    -- digital call, setting user information layer 1 to 38 (0x26)
    -- zap call: h324musellc=0, ast->userinformationlayer1=38
    -- Requested transfer capability: 0x18 - VIDEO
> Protocol Discriminator: Q.931 (8)  len=37
> Call Ref: len= 2 (reference 4/0x4) (Originator)
> Message type: SETUP (5)
> [04 03 88 90 a6]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Unrestricted digital information (8)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
(16)
>                                User information layer 1: H.223 and H.245(38)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Exclusive
Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 1 ]
> [6c 06 00 80 32 30 30 30]
> Calling Number (len= 8) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0)
>                           Presentation: Presentation permitted, user
number not screened (0)  '2000' ]
> [70 0b 80 30 36 31 35 30 36 34 30 38 30]
> Called Number (len=13) [ Ext: 1  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0)  '06xxxxxxxx' ]
> [a1]skdev*CLI>
> Sending Complete (len= 1)
q931.c:3245 q931_setup: call 32772 on channel 1 enters state 1 (Call
Initiated)
    -- Called g0/06xxxxxxxx
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 4/0x4) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 80 e4 04]
< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
Location: User (0)
<                  Ext: 1  Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
<              Cause data 1: 04 (4)
-- Processing IE 8 (cs0, Cause)
q931.c:3875 q931_receive: call 32772 on channel 1 enters state 0 (Null)
    -- Channel 0/1, span 1 got hangup, cause 100
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
    -- Hungup 'Zap/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'Local/666 at test-23e7,2' status is
'CHANUNAVAIL'
  == Auto fallthrough, channel 'SIP/2000-0823bb08' status is 'UNKNOWN'
Kind regards,

Rene van Weert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20080401/85448367/attachment-0001.htm