[Asterisk-video] [spam] Outbound Call / Callout Support
Sergio Garcia Murillo
sergio.garcia at fontventa.com
Wed Nov 21 16:00:16 CST 2007
If I understand what you want you need Asterisk manager API
http://www.voip-info.org/wiki/view/Asterisk+manager+API
or some click-to-call
http://www.voip-info.org/wiki/view/Asterisk+click+to+call
BR
Sergio
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal at viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video at lists.digium.com>
Sent: Wednesday, November 21, 2007 5:03 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Sergio,
I have successfully relayed an inbound video call to another 3G handset
using the following configuration:
[from-pri]
exten => ${PRI}592,1,Dial(Zap/g1/162...)
exten => ${PRI}592,n,h324m_gw(cp3 at test)
exten => ${PRI}592,n,Hangup()
[test]
exten => cp3,1,h324m_call()
Any ideas how to trigger an outbound video call and connecting it with an
extension to stream or record videos?
Best Regards,
Cihan
-----Ursprüngliche Nachricht-----
Von: asterisk-video-bounces at lists.digium.com
[mailto:asterisk-video-bounces at lists.digium.com] Im Auftrag von Sergio
Garcia Murillo
Gesendet: Dienstag, 13. November 2007 23:57
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Cihan,
In your case you should use or plain Dial comand instead of the h324m_call
or answer the call with h324m_gw and later pass it to h324m_call.
In the first case you'll have asterisk bridging two 3g calls and in the
second you'll have asterisk answering a 3g call and creating a 3g call and
bridge the audio and video between both.
BR
Sergio
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal at viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video at lists.digium.com>
Sent: Tuesday, November 13, 2007 2:41 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
> Hi,
>
> We have made some mistakes patching asterisk. Now I can initiate a
> outbound video call.
>
> I tried to use asterisk as a relay making a inbound call and forwarding
> it with a outbound call to a other device. But I get a hangup after
> accepting the outbound call.
>
> The logs and conf are attached.
>
> Has anybody successfully made a 3G-324M outbound call and connected two
> mobile phones with each other? Or has anybody played a video to a device
> connected with a outbound call?
>
> Regards,
> Cihan
>
> *** extensions.conf:
>
> [from-pri]
> exten => ${PRI}500,1,Noop(Answered connection from ${CALLERID(all)} to
> context: ${CONTEXT})
> exten => ${PRI}500,n,Answer
> exten => ${PRI}500,n,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
> exten => ${PRI}500,n,h324m_call(666 at test)
>
> [test]
> exten => 666,1,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
> exten => 666,n,Set(CHANNEL(transfercapability)=VIDEO)
> exten => 666,n,NoOp(transfer=${CHANNEL(transfercapability)})
> exten => 666,n,Set(CHANNEL(userinformationlayer1)=38)
> exten => 666,n,NoOp(ul1=${CHANNEL(userinformationlayer1)})
> exten => 666,n,Dial,Zap/g1/1727054530
>
>
> *** Asterisk-LOG:
>
> BlnAst02*CLI>
> < Protocol Discriminator: Q.931 (8) len=49
> < Call Ref: len= 2 (reference 884/0x374) (Originator)
> < Message type: SETUP (5)
> < [a1]02*CLI>
> < Sending Complete (len= 1)
> < [04 03 88 90 a6]
> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Unrestricted digital information (8)
> < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> < Ext: 1 User information layer 1: H.223
> and H.245 (38)
> < [18 03 a9 83 82]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> < Ext: 1 Channel: 2 ]
> < [6c 0d 21 83 31 37 36 32 31 30 30 37 39 35 39]
> < Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> < Presentation: Presentation allowed of
> network provided number (3) '17621007959' ]
> < [70 0a c1 32 32 31 39 34 33 35 30 30]
> < Called Number (len=12) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '221943500' ]
> < [7c 04 88 90 26 90]
> < IE: Low-layer Compatibility (len = 6)
> -- Making new call for cr 884
> -- Processing Q.931 Call Setup
> -- Processing IE 161 (cs0, Sending Complete)
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 108 (cs0, Calling Party Number)
> -- Processing IE 112 (cs0, Called Party Number)
> -- Processing IE 124 (cs0, Low-layer Compatibility)
> q931.c:3297 q931_receive: call 884 on channel 2 enters state 6 (Call
> Present)
> q931.c:2571 q931_call_proceeding: call 884 on channel 2 enters state 9
> (Incoming Call Proceeding)
> > Protocol Discriminator: Q.931 (8) len=10
> > Call Ref: len= 2 (reference 884/0x374) (Terminator)
> > Message type: CALL PROCEEDING (2)
> > [18 03 a9 83 82]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 2 ]
> -- Accepting call from '017621007959' to '221943500' on channel 0/2,
> span 1
> -- Executing [221943500 at from-pri:1] NoOp("Zap/2-1", "Answered
> connection from "" <017621007959> to context: from-pri") in new stack
> -- Executing [221943500 at from-pri:2] Answer("Zap/2-1", "") in new
> stack
> q931.c:2700 q931_connect: call 884 on channel 2 enters state 8 (Connect
> Request)
> > Protocol Discriminator: Q.931 (8) len=10
> > Call Ref: len= 2 (reference 884/0x374) (Terminator)
> > Message type: CONNECT (7)
> > [18 03 a9 83 82]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 2 ]
> -- Executing [221943500 at from-pri:3] NoOp("Zap/2-1", "ul1 is 38") in
> new stack
> -- Executing [221943500 at from-pri:4] h324m_call("Zap/2-1",
> "666 at test") in new stack
> -- Executing [666 at test:1] NoOp("Local/666 at test-fee3,2", "ul1 is 0")
> in new stack
> -- Executing [666 at test:2] Set("Local/666 at test-fee3,2",
> "CHANNEL(transfercapability)=VIDEO") in new stack
> -- Executing [666 at test:3] NoOp("Local/666 at test-fee3,2",
> "transfer=VIDEO") in new stack
> -- Executing [666 at test:4] Set("Local/666 at test-fee3,2",
> "CHANNEL(userinformationlayer1)=38") in new stack
> -- Executing [666 at test:5] NoOp("Local/666 at test-fee3,2", "ul1=38") in
> new stack
> -- Executing [666 at test:6] Dial("Local/666 at test-fee3,2",
> "Zap/g1/1727054530") in new stack
> -- Making new call for cr 32772
> -- digital call, setting user information layer 1 to 38 (0x26)
> -- Requested transfer capability: 0x18 - VIDEO
> > Protocol Discriminator: Q.931 (8) len=44
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: SETUP (5)
> > [04 03 88 90 a6]
> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Unrestricted digital information (8)
> > Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> > Ext: 1 User information layer 1: H.223
> and H.245 (38)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 1 ]
> > [6c 0e 21 80 30 31 37 36 32 31 30 30 37 39 35 39]
> > Calling Number (len=16) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user
> number not screened (0) '017621007959' ]
> > [70 0b a1 31 37 32 37 30 35 34 35 33 30]
> > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1727054530' ]
> q931.c:2880 q931_setup: call 32772 on channel 1 enters state 1 (Call
> Initiated)
> -- Called g1/1727054530
> < Protocol Discriminator: Q.931 (8) len=10
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: SETUP ACKNOWLEDGE (13)
> < [18 03 a9 83 81]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> < Ext: 1 Channel: 1 ]
> -- Processing IE 24 (cs0, Channel Identification)
> q931.c:3621 q931_receive: call 32772 on channel 1 enters state 2
> (Overlap sending)
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 884/0x374) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
> q931.c:3455 q931_receive: call 884 on channel 2 enters state 10 (Active)
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: ALERTING (1)
> q931.c:3342 q931_receive: call 32772 on channel 1 enters state 4 (Call
> Delivered)
> -- Zap/1-1 is ringing
> < Protocol Discriminator: Q.931 (8) len=16
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: CONNECT (7)
> < [29 05 07 0b 06 10 0b]
> < Time Date (len= 7) [ 07-11-06 16:11 ]
> < [4c 02 00 a3]
> < Connected Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI:
> Unknown Number Plan (0)
> < Ext: 1 Presentation: Presentation
> prohibited of network provided number (35) '' ]
> -- Processing IE 41 (cs0, Date/Time)
> -- Processing IE 76 (cs0, Connected Number)
> q931.c:3372 q931_receive: call 32772 on channel 1 enters state 10
> (Active)
> > Protocol Discriminator: Q.931 (8) len=5
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: CONNECT ACKNOWLEDGE (15)
> -- Zap/1-1 answered Local/666 at test-fee3,2
> == Spawn extension (test, 666, 6) exited non-zero on
> 'Local/666 at test-fee3,2'
> < Protocol Discriminator: Q.931 (8) len=29
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: FACILITY (98)
> < [1c 16 91 a1 13 02 02 42 89 02 01 22 30 0a a1 05 30 03 02 01 01 82 01
> 00]
> < Facility (len=24, codeset=0) [ 0x91, 0xA1, 0x13, 0x02, 0x02, 'B',
> 0x89, 0x02, 0x01, '"0', 0x0A, 0xA1, 0x05, '0', 0x03, 0x02, 0x01, 0x01,
> 0x82, 0x01, 0x00 ]
> PROTOCOL 11
> A1 0013 (CONTEXT SPECIFIC [1])
> 02 0002 42 89 (INTEGER: 17033)
> 02 0001 22 (INTEGER: 34)
> 30 000A (SEQUENCE)
> A1 0005 (CONTEXT SPECIFIC [1])
> 30 0003 (SEQUENCE)
> 02 0001 01 (INTEGER: 1)
> 82 0001 00 (CONTEXT SPECIFIC [2])
> -- Processing IE 28 (cs0, Facility)
> Handle Q.932 ROSE Invoke component
> [ Handling operation 34 ]
> ROSE 34: AOC-D Charging Unit - not handled! [ 30 0A A1 05 30 03 02 01 01
> 82 01 00 ] - [0...0.......]
> < Protocol Discriminator: Q.931 (8) len=18
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: INFORMATION (123)
> < [28 0b 31 20 45 69 6e 68 65 69 74 65 6e]
> < Display (len=11) [ 1 Einheiten ]
> -- Processing IE 40 (cs0, Display)
> < Protocol Discriminator: Q.931 (8) len=9
> < Call Ref: len= 2 (reference 884/0x374) (Originator)
> < Message type: DISCONNECT (69)
> < [08 02 80 90]
> < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: User (0)
> < Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> -- Processing IE 8 (cs0, Cause)
> q931.c:3562 q931_receive: call 884 on channel 2 enters state 12
> (Disconnect Indication)
> -- Channel 0/2, span 1 got hangup request, cause 16
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate
> Connect Request
> q931.c:2764 q931_disconnect: call 32772 on channel 1 enters state 11
> (Disconnect Request)
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: DISCONNECT (69)
> > [08 02 81 90]
> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> -- Hungup 'Zap/1-1'
> == Spawn extension (from-pri, 221943500, 4) exited non-zero on
> 'Zap/2-1'
> -- Executing [h at from-pri:1] NoOp("Zap/2-1", "Channel got hung up")
> in new stack
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
> q931.c:2716 q931_release: call 884 on channel 2 enters state 19 (Release
> Request)
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 884/0x374) (Terminator)
> > Message type: RELEASE (77)
> > [08 02 81 90]
> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> -- Hungup 'Zap/2-1'
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 884/0x374) (Originator)
> < Message type: RELEASE COMPLETE (90)
> q931.c:3502 q931_receive: call 884 on channel 2 enters state 0 (Null)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> < Protocol Discriminator: Q.931 (8) len=41
> < Call Ref: len= 2 (reference 4/0x4) (Terminator)
> < Message type: RELEASE (77)
> < [1c 15 91 a1 12 02 02 42 8a 02 01 24 30 09 30 07 a1 05 30 03 02 01 02]
> < Facility (len=23, codeset=0) [ 0x91, 0xA1, 0x12, 0x02, 0x02, 'B',
> 0x8A, 0x02, 0x01, '$0', 0x09, '0', 0x07, 0xA1, 0x05, '0', 0x03, 0x02,
> 0x01, 0x02 ]
> PROTOCOL 11I>
> A1 0012 (CONTEXT SPECIFIC [1])
> 02 0002 42 8A (INTEGER: 17034)
> 02 0001 24 (INTEGER: 36)
> 30 0009 (SEQUENCE)
> 30 0007 (SEQUENCE)
> A1 0005 (CONTEXT SPECIFIC [1])
> 30 0003 (SEQUENCE)
> 02 0001 02 (INTEGER: 2)
> < [28 0b 32 20 45 69 6e 68 65 69 74 65 6e]
> < Display (len=11) [ 2 Einheiten ]
> -- Processing IE 28 (cs0, Facility)
> Handle Q.932 ROSE Invoke component
> [ Handling operation 36 ]
> -- Processing IE 40 (cs0, Display)
> q931.c:3537 q931_receive: call 32772 on channel 1 enters state 0 (Null)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
> Request
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: RELEASE COMPLETE (90)
> > [08 02 81 90]
> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> -- Channel 0/1, span 1 received AOC-E charging 2 units
> BlnAst02*CLI>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-video
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-video
More information about the asterisk-video
mailing list