[Asterisk-video] Video with AsteriskNow and X-Lite

[tech at i6net.com]

Selon Benedikt Franz <antimony_solder at yahoo.de>:

The x-Lite generate reinvites when you press the "start" bouton I think...
Have you the "canreinvite" sip parameter set to yes ?

Enable the SIP traces and check the call flow.


Tech

> Hello everybody,
>
>   first of all, please let me apologize for my inexperience in using
> Asterisk. I became involved with it a few years ago, but most of my knowledge
> from these days decided to walk away from me.... So if this question may be
> typical for an Asterisk-beginner, if you will, please let me know.
>
>   My problem is the following: I am running AsteriskNow beta4 here, with the
> simple X-Lite 3.0 build 34025 and a Logitech USB Camera installed. Now I want
> to make video calls to other users on the system, but so far, I have not been
> successfull. Is it possible, that AsteriskNow does not support video-calls at
> all?
>
>   I have added the lines
>   ; Added video support
> videosupport=yes
> allow=h261
> allow=h263
> allow=h263p
>   to the sip.conf, and did a 'module reload'. Now when I open X-Lite, call
> someone and click the button 'Start' (sending video), the video should appear
> on the other users screen, but it does not (I do see the cameras viewport
> through my own X-Lite, so that seems all properly set up). According to 'core
> show codecs', my Asterisk does support both the h.263 and h.263p codec, and
> these are also set on either X-Lite clients.
>
>   Could anyone please help me to figure this out? Thanks!!
>
>
> ---------------------------------
> Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und viel mehr
> bietet das  neue Yahoo! Mail .