[Asterisk-video] Re: app_h324m does not compile

[Andreas Anderson]

Hi,

thanks to both of you, i was indeed using trunk, with your patches it now 
compiles fine. So the next problem ;-)

When i dial with a normal phone to the loopback app, i can hear the 
fast-beeping-like noise, so it seems to work. But if i'm dialing in with a 
videocall, misdn does not seem to recognize the call:

P[ 0] Got empty Msg..
P[ 1] handle_frm: frm->addr:42000103 frm->prim:36282
P[ 1] *HOLDER: find ffff0001
P[ 1] *HOLDER: find nothing
P[ 1]  --> Didn't find BC so temporarly creating dummy BC (l3id:ffff0001) on 
this port.
P[ 1] Decoding FACILITY failed! (-1)
P[ 1] lib Got Prim: Addr 42000103 prim 36282 dinfo ffff0001
P[ 1] $$$ find_chan: No channel found for oad: dad:
P[ 1] I IND :FACILITY oad: dad: pid:0 state:none
P[ 1]  --> channel:0 mode:TE cause:0 ocause:0 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:0 l3id:ffff0001 b_stid:0 layer_id:0
P[ 1]  --> facility:Fac_None out_facility:unknown
P[ 1]  --> urate:0 rate:0 mode:0 user1:0
P[ 1]  --> bc:23c7e84 h:0 sh:0
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> unknown
P[ 1]  --> not yet handled: facility type:0xffff
P[ 1] Freeing Msg on prim:36282
P[ 0] MGMT: Short status dinfo 2000001
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
P[ 1] handle_frm: frm->addr:42000103 frm->prim:36282
P[ 1] *HOLDER: find ffff0001
P[ 1] *HOLDER: find nothing
P[ 1]  --> Didn't find BC so temporarly creating dummy BC (l3id:ffff0001) on 
this port.
P[ 1] Decoding FACILITY failed! (-1)
P[ 1] lib Got Prim: Addr 42000103 prim 36282 dinfo ffff0001
P[ 1] $$$ find_chan: No channel found for oad: dad:
P[ 1] I IND :FACILITY oad: dad: pid:0 state:none
P[ 1]  --> channel:0 mode:TE cause:0 ocause:0 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:0 l3id:ffff0001 b_stid:0 layer_id:0
P[ 1]  --> facility:Fac_None out_facility:unknown
P[ 1]  --> urate:0 rate:0 mode:0 user1:0
P[ 1]  --> bc:23c7e84 h:0 sh:0
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> unknown
P[ 1]  --> not yet handled: facility type:0xffff
P[ 1] Freeing Msg on prim:36282
P[ 0] Got empty Msg..
P[ 0] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED

bearer compatibilty is set to "all". Do i need some patch for it to work or 
did i get the part wrong that it should work with misdn?

Thanks for your great work!

Regards,

Andreas

_________________________________________________________________
Become a fitness fanatic @  http://xtramsn.co.nz/health