[Asterisk-video] how to setup SIP-324M gateway

[Arnold P. Siboro]

Actually the instruction does not mention the Answer line, so I fixed
the configuration to as follows:

[from-zaptel]
exten => s,1,h324m_gw(s at threegvideo)

[threegvideo]
exten => s,1,Dial(SIP/1002)

But the caller keeps ringing while callee (1002) receives nothing, as
follows:

Connected to Asterisk 1.4.7.1-BRIstuffed-0.4.0-test2 currently running on asterisk1 (pid = 22790)
ionerisk1*CLI>
Verbosity is at least 3
    -- Going to extension s|1 because of immediate=yes
    -- Accepting voice call from '0948523078' to 's' on channel 0/1, span 1
    -- Executing [s at from-zaptel:1] h324m_gw("Zap/1-1", "s at threegvideo") in new stack
    -- Executing [s at threegvideo:1] Dial("Local/s at threegvideo-3a33,2", "SIP/1002") in new stack
    -- Couldn't call 1002
  == Everyone is busy/congested at this time (0:0/0/0)
  == Auto fallthrough, channel 'Local/s at threegvideo-3a33,2' status is 'CHANUNAVAIL'
  == Spawn extension (from-zaptel, s, 1) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'


Pada Mon, 23 Jul 2007 14:54:08 +0900
si "Arnold P. Siboro" <asiboro at maltech.jp> bilang:

> 
> I got my Asterisk box running and tested with ISDN line. Furthermore, h324m_loopback()
> also worked perfectly. I want to setup a SIP-324M gateway, following the
> instruction on libh324m gateway, I set it as follows:
> 
> [from-zaptel]
> exten => _.,1,Answer
> ;exten => s,10,h324m_gw(SIP/1002)
> exten => _X.,1,h324m_gw(s at threegvideo)
> 
> [threegvideo]
> exten => s,1,Dial(SIP/1002)
> 
> However, it does not work (caller keeps ringing but callee does not get
> does not response), giving the following message:
> 
> 
> Connected to Asterisk 1.4.7.1-BRIstuffed-0.4.0-test2 currently running on asterisk1 (pid = 22790)
> ionerisk1*CLI>
> Verbosity is at least 3
>   == Parsing '/etc/asterisk/manager.conf': Found
>   == Parsing '/etc/asterisk/manager_custom.conf': Found
>   == Manager 'admin' logged on from 127.0.0.1
>     -- Going to extension s|1 because of immediate=yes
>     -- Accepting voice call from '0948523078' to 's' on channel 0/1, span 1
>     -- Executing [s at from-zaptel:1] Answer("Zap/1-1", "") in new stack
>   == Auto fallthrough, channel 'Zap/1-1' status is 'UNKNOWN'
>     -- Executing [h at from-zaptel:1] Answer("Zap/1-1", "") in new stack
>     -- Hungup 'Zap/1-1'
> 
> Is it codec problem? I was kind of expecting some message if it's about
> codec. BTW, on the SIP end I am using X-Lite, which I think does not
> have the right audio codec to talk with h324m endpoint.
> 
> 
> Arnold P. Siboro (asiboro at maltech.jp)
> 
> "Imagination is more important than knowledge." 
>                                  --Albert Einstein.
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video
> 


Arnold P. Siboro (asiboro at maltech.jp)

The opinions expressed herein are not necessarily those of my employer, 
not necessarily mine, and probably not necessary.