[Asterisk-video] Trouble making outbound h324m video call

Klaus Darilion klaus.mailinglists at pernau.at
Thu Dec 20 03:07:57 CST 2007


Hi Rene!

Do incoming h324m call work?

Could you provide q931 dumps of the incoming and the outgoing call? (use 
"pri debug span x"  x is your span)

regards
klaus

Rene van Weert schrieb:
> Hey everyone,
>  
> I'm trying to make an outbound call using h324m_call but I keep getting 
> stuck with the following error:
>  
>     -- Executing [665 at from-sip:1] h324m_call("SIP/2000-08214978", 
> "666 at test <mailto:666 at test>") in new stack
>     -- Executing [666 at test:1] Set(" Local/666 at test-89ed,2 
> <mailto:Local/666 at test-89ed,2>", "CHANNEL(transfercapability)=VIDEO") in 
> new stack
>     -- Executing [666 at test:2] NoOp("Local/666 at test-89ed,2 
> <mailto:Local/666 at test-89ed,2>", "transfer=VIDEO") in new stack
>     -- Executing [666 at test:3] Set("Local/666 at test-89ed,2 
> <mailto:Local/666 at test-89ed,2>", "CHANNEL(userinformationlayer1)=38") in 
> new stack
>     -- Executing [666 at test:4] NoOp(" Local/666 at test-89ed,2 
> <mailto:Local/666 at test-89ed,2>", "ul1=38") in new stack
>     -- Executing [666 at test:5] Dial("Local/666 at test-89ed,2 
> <mailto:Local/666 at test-89ed,2>", "Zap/g1/0x") in new stack
>     -- digital call, setting user information layer 1 to 38 (0x26)
>     -- Requested transfer capability: 0x18 - VIDEO
>     -- Called g1/06xxxx
> *    -- Channel 0/2, span 1 got hangup, cause 100
> *    -- Hungup 'Zap/2-1'
> Cause 100 means the following on a page of isdn cause codes i found:
> 
> *Cause No. 100 - Invalid information element contents.*
> This cause indicates that the equipment sending this cause has received 
> and information element which it has implemented; however, one or more 
> of the fields in the information element are coded in such a way which 
> has not been implemented by the equipment sending this cause.
> 
> What it means:
> Like cause 1 and cause 88, this usually indicates that the ISDN number 
> being dialed is in a format that is not understood by the equipment 
> processing the call. SPIDs will sometimes fail to initialize with a 
> Cause 100, or a call will fail with this cause.
>  
> Can anyone help me in resolving this problem?
> I am running Asterisk 1.4.15 with Digium TE110P 1 span on a KPN (also 
> tried MCI) E1 line.
>  
> If any more info needed please let me know.
>  
> Thanks and cheers!
> René van Weert
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video



More information about the asterisk-video mailing list