[Asterisk-video] Counterpath

[Christian Krützfeldt]

John,

Here is the section from my sip.conf file.

[christian]
type=friend
username=christian
callerid=Christian Kruetzfeldt <xxxx>
mailbox=911 at default
secret=xxxx
qualify=1000
nat=no
host=dynamic
canreinvite=yes
context=local-dial-out
language=en
disallow=all
allow=gsm
allow=ulaw
allow=alaw
allow=h263 

And yes, I do get incomming and outgoing video.

If you want to test call, or something like that, we can do that, but not today, I am in Germany (GMT+1)


Christian


-----Original Message-----
From: asterisk-video-bounces at lists.digium.com [mailto:asterisk-video-bounces at lists.digium.com] On Behalf Of John Martin
Sent: Dienstag, 6. Juni 2006 18:03
To: Discussion of video media support in Asterisk
Subject: RE: [Asterisk-video] Counterpath

Christian, can you tell me which video codecs you have enabled on Asterisk? My problems seem to relate to h263 and h264 at the same time.

Thanks, John

John Martin
John.Martin at AuPix.com
http://www.AuPix.com


-----Original Message-----
From: asterisk-video-bounces at lists.digium.com [mailto:asterisk-video-bounces at lists.digium.com] On Behalf Of Christian Krützfeldt
Sent: 06 June 2006 16:57
To: Discussion of video media support in Asterisk
Subject: RE: [Asterisk-video] Counterpath

Hi,

Yes, I have eyebeam working with Asterisk 1.2.7.1 (yes, I know, I should update it) My eyeBeam version is 1.5.5 build 29115

It works fine, as far as I can tell. 
I just tried calling a video-voicemail box and all I get are a couple of:

Jun  6 15:55:21 NOTICE[5309]: rtp.c:815 ast_rtp_read: Unknown RTP codec 126 received

Other then the log message above it works.

Christian


-----Original Message-----
From: asterisk-video-bounces at lists.digium.com [mailto:asterisk-video-bounces at lists.digium.com] On Behalf Of John Martin
Sent: Dienstag, 6. Juni 2006 17:26
To: asterisk-video at lists.digium.com
Subject: [Asterisk-video] Counterpath

Has anyone got the Counterpath eyebeam PC client working with video on Asterisk?

The problem I'm seeing seems to be with fast-update-requests, if the eyebeam is sent a SIP info fast-update-request it'll send a 488 back.
Now, if the eyebeam was the receiver of the call then Asterisk will drop the call to the calling party once it sees the 488. If the eyebeam makes the call then it just sits there sending 488's every time it sees a SIP INFO FUR.

I can get video working if I use fast update requests via H.261 RTCP, but this isn't in a mainline version of asterisk at the moment.

This behaviour happens in sdpcleanup and 1.2.

John Martin


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video