<p dir="ltr">Hmmm.. So if you are sure that the poke packets leave the network interface (I would still check with tcpdump as well, maybe a firewall issue?) then it makes sense to check the other side to make sure the poke packets reach other servers. <br>
I mean with tcpdump you may see if there are incoming packets from your peers on the interface. If there are, then they are dropped or ignored by your servers. If no, then it's better to check the other side.<br>
you may try smth like 'tcpdump -npi <ethN> host <your peer> and port 4569' <br>
Do you have a firewall configured on this server?<br>
</p>
<br><div class="gmail_quote"><div dir="ltr">On Fri, Apr 21, 2017, 12:36 AM Carlos Chavez <<a href="mailto:cursor@telecomab.mx">cursor@telecomab.mx</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div bgcolor="#FFFFFF" text="#000000">
    <p>On 4/20/17 2:37 PM, Kseniya Blashchuk wrote:<br>
    </p>
    <blockquote type="cite">
      <div dir="ltr">If SIP goes to the same provider then yes. Still I
        would check a packet capture for better understanding. BTW, did
        you try iax debug? </div>
      <br>
      <div class="gmail_quote">
        <div dir="ltr">чт, 20 апр. 2017 г. в 19:46, Carlos Chavez <<a href="mailto:cursor@telecomab.mx" target="_blank">cursor@telecomab.mx</a>>:<br>
        </div>
        <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
          <div bgcolor="#FFFFFF" text="#000000">
            <p>On 4/20/17 12:45 AM, Kseniya Blashchuk wrote:<br>
            </p>
            <blockquote type="cite">
              <p dir="ltr">Can it happen that the routes lead the
                traffic through another interface? Did you try a packet
                capture with tcpdump? Do the packets really leave the
                usb adapter? Can asymmetric routing be in effect? <br>
                Maybe there were some static routes that disappeared
                when the adapter was unplugged...</p>
              <br>
              <div class="gmail_quote">
                <div dir="ltr">On Thu, Apr 20, 2017, 12:41 AM Antony
                  Stone <<a href="mailto:Antony.Stone@asterisk.open.source.it" target="_blank">Antony.Stone@asterisk.open.source.it</a>>
                  wrote:<br>
                </div>
                <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On
                  Wednesday 19 April 2017 at 23:35:24, Carlos Chavez
                  wrote:<br>
                  <br>
                  > On 4/19/17 4:23 PM, Antony Stone wrote:<br>
                  > ><br>
                  > > You say the USB ethernet adapter got
                  unplugged and then reconnected...<br>
                  > ><br>
                  > > 1. What's the name of the network device for
                  this adapter?  Is it the<br>
                  > > same name as it previously had?<br>
                  > ><br>
                  > > 2. What does 'ifconfig' say the IP address
                  is for this adapter?<br>
                  > ><br>
                  > > 3. What do you have in
                  /etc/asterisk/iax.conf for 'bindaddr' and<br>
                  > > 'bindport'?<br>
                  > ><br>
                  > > 4. Do you have SIP connections on the same
                  network interface, and are<br>
                  > > those working as normal?<br>
                  > ><br>
                  > ><br>
                  > > Antony.<br>
                  ><br>
                  > 1- No changes to device names.  eth0 is the main
                  link to the network,<br>
                  > eth1 (also internal) goes to a SIP provider and
                  eth2 (the USB adapter)<br>
                  > goes to another SIP provider.  All IAX trunks use
                  eth0<br>
                  ><br>
                  > 2- ifconfig gives the proper IP and netmask for
                  all interfaces<br>
                  ><br>
                  > 3- We do not specify bindaddr or bindport in the
                  config file as the<br>
                  > default is to bind to 0.0.0.0<br>
                  ><br>
                  > 4- We had to make new SIP trunks to replace the
                  IAX2 trunks to all<br>
                  > servers.  The SIP trunk is working with no
                  problems.  Except for two SIP<br>
                  > links to PSTN all internal extensions use the
                  same network interface.<br>
                  <br>
                  Ugh :(<br>
                  <br>
                  Sorry, I have no more ideas, then.<br>
                  <br>
                  I hope someone else comes into this thread with a
                  helpful suggestion.<br>
                  <br>
                  <br>
                </blockquote>
              </div>
            </blockquote>
          </div>
          <div bgcolor="#FFFFFF" text="#000000">     If routing was the
            problem then the SIP trunk would not work.  Usually IAX2 is
            a little more forgiving about routing than SIP.</div>
          <div bgcolor="#FFFFFF" text="#000000"><br>
          </div>
        </blockquote>
      </div>
    </blockquote></div><div bgcolor="#FFFFFF" text="#000000">
        The new SIP trunks are replacing the IAX2 trunks to our other
    Asterisk servers and use exactly the same network paths, that is why
    I know it is not a network infrastructure issue.  We did turn on IAX
    debug and we only se the server trying to poke the other servers but
    there is not response or any incoming traffic.</div><div bgcolor="#FFFFFF" text="#000000"><br>
    <pre class="m_1099640358496395613moz-signature" cols="72">-- 
Telecomunicaciones Abiertas de México S.A. de C.V.
Carlos Chávez
+52 (55)8116-9161</pre>
  </div>

--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" rel="noreferrer" target="_blank">http://www.api-digital.com</a> --<br>
<br>
Check out the new Asterisk community forum at: <a href="https://community.asterisk.org/" rel="noreferrer" target="_blank">https://community.asterisk.org/</a><br>
<br>
New to Asterisk? Start here:<br>
      <a href="https://wiki.asterisk.org/wiki/display/AST/Getting+Started" rel="noreferrer" target="_blank">https://wiki.asterisk.org/wiki/display/AST/Getting+Started</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
   <a href="http://lists.digium.com/mailman/listinfo/asterisk-users" rel="noreferrer" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a></blockquote></div>