<div dir="ltr"><br><div class="gmail_extra"><div class="gmail_quote"><br>On Tue, Jun 24, 2014 at 5:25 AM, arun kumar <span dir="ltr"><<a href="mailto:arunvsadnikov@gmail.com" target="_blank">arunvsadnikov@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hello All,<br><br>    I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is?<br>

    <br>    Here are my configuration<br>    /etc/zaptel.conf<br>    span=1,1,0,esf,b8zs<br>    bchan=1-23<br>    dchan=24<br>    <br>    Zaptel Configuration<br>    ======================<br>    SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)<br>

    24 channels configured<br>    <br>Thanks<span class="HOEnZb"><font color="#888888"><br>~Arun<br></font></span></div><br></blockquote></div><br></div><div class="gmail_extra">It could still be some sort of system config issue, even if you think everything is configured the same.  Have you tried moving the T1 card from the "Bad" system to the "good" system?  That will at least help narrow down if it's a bad card / port, or a config issue.<br>
<br></div><div class="gmail_extra">-Josh<br></div></div>