<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    <div class="moz-cite-prefix">you have already listed the two config
      files for using zaptel.<br>
      on first sight, they look ok to me (did not use zaptel for years
      now)<br>
      maybe you should definitely comment out any span that is not in
      use... or do the opposite.<br>
      i&acute;ve seen this warning several times, but i cant remember it had
      anything to do with spans<br>
      being configured but not used.<br>
      it always had something to do with timing or even defective cards
      or cabling or even wrong<br>
      settings on providers&acute; site.<br>
      <br>
      what changes were made to the system so that these warnings occur?
      or have they been <br>
      visible from the very start? do they affect telefony (e.g. loss of
      calls, one side audio only etc.)?<br>
      how much load (concurrent calls) is on the asterisk, does the
      warning occur periodically or<br>
      only a few times?<br>
      these are all questions you should ask yourself to help you find
      the answer yourself... it can<br>
      be very frustrating sometimes, but for me, thats all i can tell
      about.<br>
      <br>
      regards,<br>
      yves<br>
      <br>
      Am 27.03.2013 13:06, schrieb Salaheddine Elharit:<br>
    </div>
    <blockquote
cite="mid:CAHexamtyFeyqRk0nn2Dcs+fFvMQhmLj43wcrFq9f1xUNVRKWDg@mail.gmail.com"
      type="cite">
      <div dir="ltr">thank you for your help ,but which configure script
        and when i can find this script &nbsp;? in etc/asterisk
        <div><br>
          <div><br>
          </div>
          <div>best regards &nbsp;<br>
            <br>
            <div class="gmail_quote">2013/3/27 Thorsten G&ouml;llner <span
                dir="ltr">&lt;<a moz-do-not-send="true"
                  href="mailto:tg@ovm-group.com" target="_blank">tg@ovm-group.com</a>&gt;</span><br>
              <blockquote class="gmail_quote" style="margin:0 0 0
                .8ex;border-left:1px #ccc solid;padding-left:1ex">
                <div text="#000000" bgcolor="#FFFFFF"> You do use only
                  span 1 and 6? So the other ports are not plugged? That
                  is the cause for the warnings. I use a Sangoma
                  E1-Card. The configure script gives me the option
                  "unused" for any port. Maybe your configure script
                  offers you the same option.<br>
                  <br>
                  <div>Am 27.03.2013 11:54, schrieb Salaheddine Elharit:<br>
                  </div>
                  <div>
                    <div>
                      <blockquote type="cite">
                        <div dir="ltr">Hi&nbsp;
                          <div><br>
                          </div>
                          <div>i use 2 digium cards 1 card with 2 ports
                            and the second card with 4 ports</div>
                          <div>
                            <p class="MsoNormal"> </p>
                            <p class="MsoNormal"><span lang="EN-US">&nbsp;</span></p>
                            <p class="MsoNormal"><span lang="EN-US">but
                                actually i use just the span 1 and span
                                6 </span></p>
                            <p class="MsoNormal"><span lang="EN-US">&nbsp;</span></p>
                            <p class="MsoNormal"><span lang="EN-US">Asterisk

                                1.4-r110474M</span></p>
                            <p class="MsoNormal"><span lang="EN-US">&nbsp;</span></p>
                            <p class="MsoNormal"><span lang="EN-US">i
                                use E1 ports</span></p>
                            <p class="MsoNormal"><span lang="EN-US"><br>
                              </span></p>
                            <p class="MsoNormal">zaptel.conf</p>
                            <p class="MsoNormal"><span lang="EN-US">&nbsp;</span></p>
                            <p class="MsoNormal"><span lang="EN-US"></span></p>
                            <p class="MsoNormal"># Autogenerated by
                              /usr/sbin/zapconf on Wed Feb 20 10:13:17
                              2013 -- do not hand edit</p>
                            <p class="MsoNormal"> # Zaptel Configuration
                              File</p>
                            <p class="MsoNormal">#</p>
                            <p class="MsoNormal"># This file is parsed
                              by the Zaptel Configurator, ztcfg</p>
                            <p class="MsoNormal">#</p>
                            <p class="MsoNormal"># Span 1: TE4/0/1
                              "T4XXP (PCI) Card 0 Span 1" (MASTER)
                              HDB3/CCS RED</p>
                            <p class="MsoNormal">span=1,1,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal">bchan=1-15,17-31</p>
                            <p class="MsoNormal">dchan=16</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Span 2: TE4/0/2
                              "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED</p>
                            <p class="MsoNormal">span=2,2,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal">bchan=32-46,48-62</p>
                            <p class="MsoNormal">dchan=47</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Span 3: TE4/0/3
                              "T4XXP (PCI) Card 0 Span 3"&nbsp;</p>
                            <p class="MsoNormal"># span=3,3,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal"># bchan=63-77,79-93</p>
                            <p class="MsoNormal"># dchan=78</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Span 4: TE4/0/4
                              "T4XXP (PCI) Card 0 Span 4"&nbsp;</p>
                            <p class="MsoNormal"># span=4,4,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal"># bchan=94-108,110-124</p>
                            <p class="MsoNormal"># dchan=109</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Span 5: TE2/1/1
                              "T2XXP (PCI) Card 1 Span 1"&nbsp;</p>
                            <p class="MsoNormal">span=5,5,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal">bchan=125-139,141-155</p>
                            <p class="MsoNormal">dchan=140</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Span 6: TE2/1/2
                              "T2XXP (PCI) Card 1 Span 2"&nbsp;</p>
                            <p class="MsoNormal">span=6,6,0,ccs,hdb3</p>
                            <p class="MsoNormal"># termtype: te</p>
                            <p class="MsoNormal">bchan=156-170,172-186</p>
                            <p class="MsoNormal">dchan=171</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"># Global data</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">loadzone<span
                                style="white-space:pre-wrap"> </span>=
                              us</p>
                            <p class="MsoNormal">defaultzone<span
                                style="white-space:pre-wrap"> </span>=
                              us</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">etc/asterisk/zapata.conf</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">[channels]</p>
                            <p class="MsoNormal">context=default</p>
                            <p class="MsoNormal">hidecallerid=no</p>
                            <p class="MsoNormal">callwaiting=yes</p>
                            <p class="MsoNormal">usecallingpres=yes</p>
                            <p class="MsoNormal">callwaitingcallerid=yes</p>
                            <p class="MsoNormal"> threewaycalling=yes</p>
                            <p class="MsoNormal">transfer=yes</p>
                            <p class="MsoNormal">canpark=yes</p>
                            <p class="MsoNormal">cancallforward=yes</p>
                            <p class="MsoNormal">callreturn=yes</p>
                            <p class="MsoNormal">rxgain=0.0</p>
                            <p class="MsoNormal"> txgain=0.0</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">group=1</p>
                            <p class="MsoNormal">switchtype=euroisdn</p>
                            <p class="MsoNormal">signalling=pri_cpe</p>
                            <p class="MsoNormal">callgroup=1</p>
                            <p class="MsoNormal">pickupgroup=1</p>
                            <p class="MsoNormal">immediate=no</p>
                            <p class="MsoNormal">channel =&gt;
                              1-15,17-31</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">group=2</p>
                            <p class="MsoNormal">callgroup=2</p>
                            <p class="MsoNormal">switchtype=qsig</p>
                            <p class="MsoNormal">signalling=pri_net</p>
                            <p class="MsoNormal">callerid=mycallerid</p>
                            <p class="MsoNormal">immediate=no</p>
                            <p class="MsoNormal">channel =&gt; 156-170</p>
                            <p class="MsoNormal">channel =&gt; 172-176</p>
                            <p class="MsoNormal"> channel =&gt; 125-139</p>
                            <p class="MsoNormal">channel =&gt; 141-155</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <p class="MsoNormal">thanks and regards</p>
                            <p class="MsoNormal"><br>
                            </p>
                            <br>
                            <div class="gmail_quote">2013/3/27 Yves A. <span
                                dir="ltr">&lt;<a moz-do-not-send="true"
                                  href="mailto:yves030@gmx.de"
                                  target="_blank">yves030@gmx.de</a>&gt;</span><br>
                              <blockquote class="gmail_quote"
                                style="margin:0 0 0 .8ex;border-left:1px
                                #ccc solid;padding-left:1ex">
                                <div text="#000000" bgcolor="#FFFFFF">
                                  <div>
                                    <div>Am 26.03.2013 17:57, schrieb
                                      Salaheddine Elharit:<br>
                                    </div>
                                  </div>
                                  <blockquote type="cite">
                                    <div dir="ltr">Hello,
                                      <div>
                                        <div>
                                          <div><br>
                                          </div>
                                          <div>&nbsp;i have all the time this
                                            warning i use asterisk 1.4
                                            all works without issue i
                                            don't have any problem (i
                                            can use the inbound and
                                            outbound calls without
                                            issue)</div>
                                          <div>
                                            <div><br>
                                            </div>
                                            <div>i just want to know
                                              what is this WARNING</div>
                                            <div><br>
                                            </div>
                                            <div>thanks and regards</div>
                                            <div><br>
                                            </div>
                                            <div><br>
                                            </div>
                                            <div>&nbsp;WARNING[28151]:
                                              chan_zap.c:2404
                                              pri_find_dchan: No
                                              D-channels available!
                                              &nbsp;Using Primary channel 140
                                              as D-channel anyway!</div>
                                          </div>
                                        </div>
                                      </div>
                                    </div>
                                  </blockquote>
                                  <br>
                                  this can have different causes...
                                  mostly a wrong setting in your zaptel
                                  configuration file... this could be
                                  e.g.<br>
                                  mixing american / european settings
                                  (e1/t1), <br>
                                  wrong timing settings,<br>
                                  wrong master / source clock setting,<br>
                                  [...]<br>
                                  post more details... what span (e1 or
                                  t1), which hardware, driver version,
                                  asterisk version, config files...<br>
                                  <br>
                                  <br>
                                  regards,</div>
                              </blockquote>
                            </div>
                          </div>
                        </div>
                      </blockquote>
                      <br>
                    </div>
                  </div>
                </div>
              </blockquote>
            </div>
            <br>
          </div>
        </div>
      </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by <a class="moz-txt-link-freetext" href="http://www.api-digital.com">http://www.api-digital.com</a> --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               <a class="moz-txt-link-freetext" href="http://www.asterisk.org/hello">http://www.asterisk.org/hello</a>

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   <a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a></pre>
    </blockquote>
    <br>
  </body>
</html>