<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <font face="Helvetica, Arial, sans-serif">Hello,<br>
      <br>
      I don't really see anything when pressing '0' (zero). It's like
      the '0' (zero) does not reach Asterisk.<br>
      <br>
      However the password to enter the conference does reach Asterisk
      well.<br>
      <br>
      <br>
      <br>
      Kind regards,<br>
      <br>
      Jonas.</font><br>
    <br>
    <div class="moz-cite-prefix">On 02/20/2013 03:32 PM, Rusty Newton
      wrote:<br>
    </div>
    <blockquote cite="mid:8dbafdad-d7fd-41ec-a7db-2a37ed74dd35@zimbra"
      type="cite">
      <pre wrap="">----- Original Message -----
</pre>
      <blockquote type="cite">
        <pre wrap="">From: "Jonas Kellens" <a class="moz-txt-link-rfc2396E" href="mailto:jonas.kellens@telenet.be">&lt;jonas.kellens@telenet.be&gt;</a>
</pre>
      </blockquote>
      <pre wrap="">
</pre>
      <blockquote type="cite">
        <pre wrap="">But nothing happens when pressing 0 (zero).
</pre>
      </blockquote>
      <pre wrap="">
Why not check the logs in /var/log/asterisk/full ?.  Make sure you have the full log enabled in logger.conf and that you have VERBOSE,DEBUG,DTMF type messages going to it.  You can also push those to the console and watch what happens when you press zero. On the console be sure to turn up verbosity with "core set verbose 5"

If you can't tell what is happening, post a pastebin link to the log and point out (via timestamp or otherwise) where you would expect to see the DTMF digit. Maybe someone will be able to take a look.

I'd also really recommend using ConfBridge which is newer than MeetMe. If you switch to ConfBridge I'd recommend an upgrade to the latest 1.8.X as well.


</pre>
    </blockquote>
    <br>
  </body>
</html>