Hi,<div><br></div><div>As Eric mentioned I made my zapata.conf and zaptel.conf to match each other. </div><div><br></div><div>My <b>zapata.conf </b>was </div><div><br></div><div><i>group=1</i></div><div><i>switchtype=euroisdn</i></div>
<div><i>signalling=pri_cpe</i></div><div><i>callerid=asreceived</i></div><div><i>usecallerid=yes</i></div><div><i>cidsignalling=dtmf</i></div><div><i>cidstart=ring</i></div><div><i>context=TEST_EXTERNAL</i></div><div><i>channel=>1-15</i></div>
<div><i>channel=>17-24</i></div><div><br></div><div>This was the error message I was getting when I do "<b>module load chan_zap.so</b>"</div><div><br></div><div><div><i>[Oct 1 04:29:46] WARNING[17448]: chan_zap.c:905 zt_open: Unable to specify channel 24: Device o r resource busy</i></div>
<div><i>[Oct 1 04:29:46] ERROR[17448]: chan_zap.c:7219 mkintf: Unable to open channel 24: Device or res ource busy</i></div><div><i>here = 0, tmp->channel = 24, channel = 24</i></div><div><i>[Oct 1 04:29:46] ERROR[17448]: chan_zap.c:10582 build_channels: Unable to register channel '17- 24'</i></div>
</div><div><br></div><div><br></div><div>Now I changed <b>zapata.conf</b> to</div><div><i><br></i></div><div><div><i>group=1</i></div><div><i>switchtype=euroisdn</i></div><div><i>signalling=pri_cpe</i></div><div><i>callerid=asreceived</i></div>
<div><i>usecallerid=yes</i></div><div><i>cidsignalling=dtmf</i></div><div><i>cidstart=ring</i></div><div><i>context=TEST_EXTERNAL</i></div><div><i style="background-color: rgb(255, 255, 0); ">channel=>1-23</i></div></div>
<div><br></div><div>Now the error is </div><div><br></div><div><div><i>[Oct 1 04:33:03] ERROR[17612]: chan_zap.c:9470 start_pri: Unable to open D-channel 24 (Device o r resource busy)</i></div><div><i>[Oct 1 04:33:03] ERROR[17612]: chan_zap.c:11382 setup_zap: Unable to start D-channel on span 1</i></div>
<div><br></div><div>Do I need to mention the Data channel in zapata.conf?? </div><div><br></div><div><br></div><div>My <b>zaptel.conf</b> is below. This was auto generated with <i><b>genzaptelconf -svdM</b></i></div><div>
<i><br></i></div><div><div><i># Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)</i></div><div><i>span=1,1,0,esf,b8zs</i></div><div><i># termtype: te</i></div><div><i style="background-color: rgb(255, 255, 0);">bchan=1-23</i></div>
<div><i style="background-color: rgb(255, 255, 51);">dchan=24</i></div></div><div><br></div><div>I am using a <b>Digium TE122 Card</b> . But when I do "<i><b>dmesg | wcte12xp</b></i>" I get the following</div>
<div>
<br></div><div><div><i># dmesg | wcte12xp</i></div><div><i><br></i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21</i></div><div><i>wcte12xp: Setting up global serial parameters for T1</i></div>
<div><i>wcte12xp: Found a Wildcard TE122</i></div><div><i>wcte12xp: Span configured for ESF/B8ZS</i></div><div><i>wcte12xp: Setting yellow alarm</i></div><div><i>wcte12xp0: Missed interrupt. Increasing latency to 4 ms in order to compensate.</i></div>
<div><i>wcte12xp 0000:04:00.0: PCI INT A disabled</i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21</i></div><div><i>wcte12xp: Setting up global serial parameters for T1</i></div><div>
<i>wcte12xp: Found a Wildcard TE122</i></div><div><i>wcte12xp: Span configured for ESF/B8ZS</i></div><div><i>wcte12xp: Setting yellow alarm</i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A disabled</i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21</i></div>
<div><i>wcte12xp: Setting up global serial parameters for T1</i></div><div><i>wcte12xp: Found a Wildcard TE122</i></div><div><i>wcte12xp: Span configured for ESF/B8ZS</i></div><div><i>wcte12xp: Setting yellow alarm<span></span></i></div>
<div><i>wcte12xp: Span configured for ESF/B8ZS</i></div><div><i>wcte12xp: Span configured for ESF/B8ZS</i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A disabled</i></div><div><i>wcte12xp 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21</i></div>
<div><span class="Apple-style-span" style="background-color: rgb(255, 255, 0); "><i>wcte12xp: Setting up global serial parameters for T1</i></span></div><div><i>wcte12xp: Found a Wildcard TE122</i></div><div><i>wcte12xp: Span configured for ESF/B8ZS</i></div>
<div><i>wcte12xp: Setting yellow alarm</i></div></div><div><br></div><div>Does the highlighted part mean that the card is setup in T1 mode. ?? </div><div>( I do not have physical access to the server. But my support in the remote office says that card is in E1 mode itself.. )</div>
<div><br></div><div>Thanks again for the help.</div><div>Najim</div><div><i><br></i></div><div><br></div><div><br></div></div><br><div class="gmail_quote">On Fri, Sep 30, 2011 at 1:40 PM, A J Stiles <span dir="ltr"><<a href="mailto:asterisk_list@earthshod.co.uk">asterisk_list@earthshod.co.uk</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="im">On Friday 30 September 2011, NaJIm wrote:<br>
> Am I getting these error messages due to wrong configurations in my<br>
> zapata.conf. ??<br>
><br>
> I have got the following configurations in my zapata-channels.conf.<br>
><br>
> ; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) B8ZS/ESF RED<br>
> group=0,11<br>
> context=from-pstn<br>
> switchtype = national<br>
> signalling = pri_cpe<br>
> channel => 1-23<br>
> group=<br>
> context=default<br>
<br>
</div>Your Bearer channels should be 1 to 15 and 17 to 31 (or as high as they go,<br>
depending whether or not you paid for a full set of 30 lines), with 16 as the<br>
Data channel.<br>
<font color="#888888"><br>
--<br>
AJS<br>
<br>
Answers come *after* questions.<br>
</font><div><div></div><div class="h5"><br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</div></div></blockquote></div><br>