Hi Everyone,<div><br></div><div>I am using pfSense to do firewall and NAT on an Asterisk server. I have ports 5060 TCP/UDP and 10k-20k UDP forwarded to the Asterisk server local IP 192.168.5.5. However, when a user from outside using Linksys WRP400 ata connects to the Asterisk server and registers I see them as 192.168.1.1 in the "sip show peers" command. In face, all many different of the Linksys WRP400 show the same. It seems that pfsense does something to the packets that when they reach Asterisk it thinks they are sent from the Gateway rather than the actual endpoint hence the calls are not reaching the other side but registration is made.</div>
<div><br></div><div>Any experience with this?</div><div><br></div><div>Thanks</div>