<br><br><div class="gmail_quote">2010/12/5 Administrator TOOTAI <span dir="ltr"><<a href="mailto:admin@tootai.net">admin@tootai.net</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi,<br>
<br>
I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines<br>
(mISDN) connected on it, everything runs fine.<br>
<br>
I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1<br>
module of 4 lines. Already had with this machine an RMA on both cards as<br>
they was faulty and crashed the server.<br>
<br>
What happends is that when I connect cables on the HA8 modules (those<br>
cables are unpluged from working server and connected to the new one)<br>
nothing happend on the dahdi status, alarm is RED. Two days ago one<br>
cable changed his staus to YELLOW (?) and then became again RED.<br>
<br>
Below are relevant outputs. I created those config files with one of the<br>
previous card which worked a short time and it was OK.<br>
<br>
Could it be possible that modules have also to go for RMA?<br>
<br>
Thanks for any hint.<br>
<br>
SrvPhone2:/etc/asterisk# cat chan_dahdi.conf<br>
;<br>
; DAHDI telephony interface<br>
;<br>
; Configuration file<br>
;<br>
; You need to restart Asterisk to re-configure the DAHDI channels<br>
; CLI> reload chan_dahdi.so<br>
; will reload the configuration file,<br>
; but not all configuration options are<br>
; re-configured during a reload.<br>
<br>
<br>
<br>
[channels]<br>
;<br>
; Default language<br>
;<br>
language=fr<br>
;<br>
; Default context<br>
;<br>
context=isdn<br>
internationalprefix = 00<br>
nationalprefix = 0<br>
usecallerid=yes<br>
hidecallerid=no<br>
callwaiting=yes<br>
callwaitingcallerid=yes<br>
threewaycalling=yes<br>
transfer=yes<br>
switchtype=euroisdn<br>
<br>
;<br>
; Allow call parking<br>
; ('canpark=no' is overridden by 'transfer=yes')<br>
;<br>
canpark=yes<br>
cancallforward=yes<br>
callreturn=yes<br>
echocancel=yes<br>
echocancelwhenbridged=yes<br>
;<br>
; If you are having trouble with DTMF detection, you can relax the DTMF<br>
; detection parameters. Relaxing them may make the DTMF detector more<br>
likely<br>
; to have "talkoff" where DTMF is detected when it shouldn't be.<br>
;<br>
;relaxdtmf=yes<br>
;<br>
; You may also set the default receive and transmit gains (in dB)<br>
;<br>
rxgain=0.0<br>
txgain=0.0<br>
callgroup=1<br>
pickupgroup=1<br>
immediate=no<br>
; This feature can also easily detect false hangups. The symptoms of this is<br>
; being disconnected in the middle of a call for no reason.<br>
;<br>
callprogress=yes<br>
progzone=be<br>
<br>
; For fax detection, uncomment one of the following lines. The default<br>
is *OFF*<br>
; We use NVFaxDetect stuff for this<br>
;<br>
;faxdetect=both<br>
;faxdetect=incoming<br>
;faxdetect=outgoing<br>
;faxdetect=no<br>
<br>
group=1<br>
signalling=bri_cpe<br>
context=isdn<br>
channel => 1,2,4,5,7,8,10,11,13,14,16,17,19,20,22,23<br>
<br>
<br>
<br>
<br>
<br>
SrvPhone2:/etc/dahdi# cat system.conf<br>
loadzone = be<br>
defaultzone = be<br>
<br>
span = 1,1,0,ccs,ami<br>
bchan = 1,2<br>
hardhdlc = 3<br>
<br>
span = 2,2,0,ccs,ami<br>
bchan = 4,5<br>
hardhdlc = 6<br>
<br>
span = 3,3,0,ccs,ami<br>
bchan = 7,8<br>
hardhdlc = 9<br>
<br>
span = 4,4,0,ccs,ami<br>
bchan = 10,11<br>
hardhdlc = 12<br>
<br>
span = 5,5,0,ccs,ami<br>
bchan = 13,14<br>
hardhdlc=15<br>
<br>
span = 6,6,0,ccs,ami<br>
bchan = 16,17<br>
hardhdlc = 18<br>
<br>
span = 7,7,0,ccs,ami<br>
bchan = 19,20<br>
hardhdlc = 21<br>
<br>
span = 8,8,0,ccs,ami<br>
bchan = 22,23<br>
hardhdlc = 24<br>
<br>
<br>
<br>
SrvPhone2*CLI> dahdi show status<br>
Description Alarms IRQ bpviol CRC4<br>
Fra Codi Options LBO<br>
HB8-0000 Board 1 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 1 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 1 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 1 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 2 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 2 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 2 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
HB8-0000 Board 2 RED 0 0 0<br>
CCS AMI 0 db (CSU)/0-133 feet (DSX-1)<br>
<br>
--<br>
Daniel<br>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</blockquote></div><br>Which Dahdi version ?<br>I had to use latest trunk to have mine working.<br>