<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
Hi,<BR>
<BR>
(I have install trixbox2.8 with asterisk 1.6)<BR>I am using speex codec for my Inter asterisk communication<BR><BR>Question1: I want to configure speex on 2.15kbs and packetization of 60ms seconds for that is have configured "codecs.conf" for desired result and also placed a line in general section of "sip.conf" allow=speex:60 after disallow=all line . <BR><BR>I have also configure SIP trunk between two asterisk to use speex:60<BR>During debugging I have checked that both side accept speex as a codec for call and ptime:60 but<BR><BR>I am facing following unexpected results<BR><BR>1-> When I check the packet rate from one asterisk to other asterisk for one call its not (1000/60 == 17)?<BR><BR>2-> When ever I change the softphone result changes i.e. data ratae chages ?<BR><BR>3-> How can I use my own codec "xyz" in asterisk to place calls ?<BR><BR>4->if I change the codecs.conf then no results appears in packet size which is comming out of asterisk?<BR><BR><BR> </body>
</html>