Hi Guys,<div><br></div><div>This is such an annoying issue whenever it comes up. The sender and receive always receive the source public IP no matter what in the IP packets but then SIP packets go out with something like 192.168.0.20. </div>
<div><br></div><div>In this instance, a Bell Canada DSL modem is installed and I saw the SPA-2102 register properly but only to fail later on due to sending it's LAN IP to the Asterisk server.</div><div><br></div><div>
So, I put NAT=yes and NAT_ALIVE=yes but that didn't help at all. I also put the device on DMZ in the Bell Canada DSL modem and still the same issue.</div><div><br></div><div>I am wondering when would manufacturers finally fully comply the SIP RFC?!</div>
<div><br></div><div>I don't have the luxury to put SIP proxy, do a VPN, install a server or anything on client site.</div><div><br></div><div>Diagram:</div><div><br></div><div>Asterisk Server <= Internet = Bell Canada Modem => SPA2102</div>
<div><br></div><div>Please send me your suggestions on how to fix this if you have this type of experience with SPA-2102</div><div><br></div><div>Thanks for the input,</div><div>Bruce</div><div><br></div>