Hello Ron..<div><br></div><div>The answer that i see here is only a trying to a Register...means the REGISTRATION procedures are taking a significant amount of time.</div><div><br></div><div>You should get a 200 OK</div><div>
<br></div><div>Can you lease make a simple draw of your architecture? seems to be a NAT problem, that's for sure</div><div><br></div><div>REgards!<br><br><div class="gmail_quote">2010/9/28 Ron <span dir="ltr"><<a href="mailto:nhadie@gmail.com">nhadie@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Hi Danny<br>
<br>
On the pap2 by default it is set to 3600 and i have not change that.<br>
by the way, is the NAT keep-alive same with the NOTIFY message? coz i am<br>
seeing my asterisk respond to those as bad event could that be causing<br>
it to loose the registration?<br>
<br>
here's the registration from ngrep:<br>
<br>
U <a href="http://78.65.34.12:5094" target="_blank">78.65.34.12:5094</a> -> <a href="http://12.34.56.78:5060" target="_blank">12.34.56.78:5060</a><br>
REGISTER sip:<a href="http://sip.mydomain.com" target="_blank">sip.mydomain.com</a> SIP/2.0.<br>
Via: SIP/2.0/UDP 78.65.34.12:5094;branch=z9hG4bK-25a5eec4;rport.<br>
From: Kristine <<a href="mailto:sip%3A456789@sip.mydomain.com">sip:456789@sip.mydomain.com</a>>;tag=68fc368d164925e0o0.<br>
To: Kristine <<a href="mailto:sip%3A456789@sip.mydomain.com">sip:456789@sip.mydomain.com</a>>.<br>
Call-ID: <a href="mailto:c9bd8b57-f7bdc794@192.168.1.52">c9bd8b57-f7bdc794@192.168.1.52</a>.<br>
CSeq: 116228 REGISTER.<br>
Max-Forwards: 70.<br>
Contact: Kristine <<a href="http://sip:456789@78.65.34.12:5094" target="_blank">sip:456789@78.65.34.12:5094</a>>;expires=3600.<br>
User-Agent: Linksys/PAP2T-3.1.15(LS).<br>
Content-Length: 0.<br>
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER.<br>
Supported: x-sipura.<br>
.<br>
<br>
<br>
U <a href="http://12.34.56.78:5060" target="_blank">12.34.56.78:5060</a> -> <a href="http://78.65.34.12:5094" target="_blank">78.65.34.12:5094</a><br>
SIP/2.0 100 Trying.<br>
Via: SIP/2.0/UDP<br>
78.65.34.12:5094;branch=z9hG4bK-25a5eec4;received=78.65.34.12;rport=5094.<br>
From: Kristine <<a href="mailto:sip%3A456789@sip.mydomain.com">sip:456789@sip.mydomain.com</a>>;tag=68fc368d164925e0o0.<br>
To: Kristine <<a href="mailto:sip%3A456789@sip.mydomain.com">sip:456789@sip.mydomain.com</a>>.<br>
Call-ID: <a href="mailto:c9bd8b57-f7bdc794@192.168.1.52">c9bd8b57-f7bdc794@192.168.1.52</a>.<br>
CSeq: 116228 REGISTER.<br>
User-Agent: Asterisk PBX.<br>
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO.<br>
Supported: replaces.<br>
Content-Length: 0.<br>
<div><div></div><div class="h5"><br>
<br>
On 9/28/10 7:24 PM, Danny Dias wrote:<br>
> You have to increase the time of expiration for the Register...on linksys<br>
> devices is located on Proxy and Registration section under the EXTN: (Where<br>
> N is the extension number)<br>
><br>
> Try putting this to: 3600<br>
><br>
> To check wheter or not is loosing Register, try with ngrep-sip and check it:<br>
><br>
> ngrep -p -q -W byline port 5060>register.pkt<br>
><br>
> Then post here the content of register.pkt; but please, after issuing the<br>
> change explained above!<br>
><br>
> Regards!<br>
><br>
> 2010/9/28 Ron<<a href="mailto:nhadie@gmail.com">nhadie@gmail.com</a>><br>
><br>
>> Hi All.<br>
>><br>
>> got this problem that IP phones could not re-register to my server. even<br>
>> if device is power cycled it still would not register. the solution i<br>
>> found was to change the SIP port settings on the phone and it will<br>
>> register. but after registration expires and its time to re-register the<br>
>> same thing will happen, so i have to update the port settings again just<br>
>> to make it work which is troublesome.<br>
>><br>
>> i'm using Asterisk 1.4.31 with the following realtime config:<br>
>><br>
>> rtcachefriends=yes<br>
>> rtsavesysname=yes<br>
>> rtupdate=yes<br>
>> rtautoclear=no<br>
>><br>
>> one thing i noticed is that it only seems to happen on linksys devices<br>
>> e.g. PAP2 and SPA's. another phone i'm using is yealink and so far no<br>
>> client has complain about it.<br>
>><br>
>> hope anyone can help. thank you.<br>
>><br>
>> regards<br>
>> Ron<br>
>><br>
>><br>
>> --<br>
>> _____________________________________________________________________<br>
>> -- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
>> New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
>> <a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
>><br>
>> asterisk-users mailing list<br>
>> To UNSUBSCRIBE or update options visit:<br>
>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
>><br>
><br>
<br>
</div></div>--<br>
<div><div></div><div class="h5">_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
<a href="http://www.asterisk.org/hello" target="_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</div></div></blockquote></div><br></div>