<div><br></div><div><br></div><div><br><div class="gmail_quote">On Wed, Sep 22, 2010 at 10:46 AM, Adam Moffett <span dir="ltr"><<a href="mailto:adam@plexicomm.net">adam@plexicomm.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
That's probably what I'm going to have to do. Thanks.<br>
<div class="im"><br>
> I suppose that merely removing ATA and asterisk from the middle, and<br>
> plugging a pots line into a fax machine is out of the question.<br>
><br>
><br>
<br><br></div></blockquote><div><br></div>If you are running 1.6, you can try this - <a href="https://issues.asterisk.org/view.php?id=13405">https://issues.asterisk.org/view.php?id=13405</a> I have this implemented on our production system but I personally get hit and miss results with it. Sometimes it doesn;t seem to detect its a fax call. The fax typically goes through fine over g.711u though as long as you have good network links. My setup previously included a couple of lan-extensions over DSL and it was pretty unreliable on them if there was other network traffic going on even with QoS on the edge routers heavily favoring the phone traffic.<div>
<br></div><div><a href="https://issues.asterisk.org/view.php?id=13405"></a>If you are running 1.4 you can try this - <a href="http://www.zoiper.com/foip/">http://www.zoiper.com/foip/</a> I used this back before zoiper acquired the company that owned it and it worked absolutely perfect. I haven;t tried it since its been open sourced and had 3rd party people patch it current versions of asterisk though.</div>
<div><br></div><div> </div></div><br></div>