<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Mark Michelson escribió:
<blockquote cite="mid:49D27FEA.8080108@digium.com" type="cite">
<pre wrap="">Gabriel Ortiz Lour wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi all,
After * starts the command "queue show" would not show any of the
realtime queues, but just the ones that are in the queues.conf file. In
this state de AMI would not send any "QueueMemberStatus" for that queues
until a call is received by that realtime queue.
Anyone knows any whay to load this information in *'s memory without
the need of the queue receiving a call?
Thanks,
Gabriel Ortiz
</pre>
</blockquote>
<pre wrap=""><!---->
There is a bit of a hack you can use. If you instead use the command "queue show
<some_specific_queue_name>" then Asterisk will load from realtime. Then type
"queue show" again and you'll see all the queues. I'm not sure why it was
written this way. If you use any 1.6 version of Asterisk, you will find that it
does not behave this way. "queue show" will always show all queues.
Mark Michelson
</pre>
</blockquote>
I was noticing the same behavior with 1.4 realtime queues. I thought
this was the standard, but it's good to know that 1.6 behaves well, no
matter if the queue is static from the queues.conf file or defined in
realtime way. Some of this little improvements makes 1.6 a bit more
attractive to try for us (1.4 users). Moreover, some of the changes
made to trunk to improve IAX2 performance, and some other "big" changes
are just awesome.<br>
<br>
Thanks.<br>
<br>
<pre class="moz-signature" cols="72">--
Ing. Miguel Molina
Grupo de Tecnología
Millenium Phone Center
PBX: (+57 1)6500800 ext. 1201
Fax: (+57 1)6500816
Móvil: (+57)3138873587
</pre>
</body>
</html>