<br><br><div class="gmail_quote">2009/3/8 Marco <span dir="ltr"><<a href="mailto:marcotasto@libero.it">marcotasto@libero.it</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi List,<br>
I've been using PSTN-ATA + Asterisk + IAXModem + Hylafax since three years<br>
on my lab test setup and I appreciate it. Moreover the global quantity of<br>
fax handled by this setup is not very high.<br>
<br>
I'll be involved in a more complex system for a customer and I would like<br>
to ask to All of you if you have experiences and/or statistical results on<br>
faxing success and failure rate.<br>
<br>
The system I have to deploy will operate in the following context:<br>
<br>
- It will be interfaced to an E1 PRI<br>
- It will be able to send and receive faxes (by e-mail and/or virtual<br>
printers)<br>
- It will be able to send faxes from a normal fax machine.<br>
<br>
The system will be placed on the same building, i.e. only private ethernet<br>
trunks.<br>
<br>
I'm thinking to this type of solution:<br>
- Patton external unit for E1<br>
- Asterisk 1.4 + IAXModem + Hylafax<br>
- An external ATA for the fax machine<br>
but I'm open to any other possible solution (I'm thinking to have a<br>
demodulation on Patton and talk T38 with Asterisk 1.6).<br>
<br>
The fax volume will be high because actually the customer has a ZFax<br>
software system with 12 fax-modem installed (that will be replaced by the<br>
system).<br>
<br>
I know that this was already asked in this list in the past, but I would<br>
like to know if someone has experience on this and could share their<br>
opinion, tricks and/or statistical results on failure/success rate when<br>
faxing. I think that this could be useful to other people have to realize<br>
a system like that one depicted.<br>
<br>
<br>
Thank you in advance.<br>
Marco Signorini<br>
<br>
===========================<br>
INGEGNI Tech S.r.l.<br>
<a href="http://www.ingegnitech.com" target="_blank">http://www.ingegnitech.com</a><br>
<br>
</blockquote><div><br>I had a very good success rate with multitech modems connected to fxs card and calling out with T0 (bri) I had 3 modems in total, - 1 receiveing 2 sending, they were heavily loaded and i had very low failure rate 20 000 faxes and only 3 failed (!) from 3 only one due to incompatibility (brother model know issue) and 2 bad line. I dont inclide here wrong numbers. <br>
</div></div><br>