Hi,<br><br>I've just installed DAHDI at two PBXs as follows:<br><br><b>PBX-1 PBX-2</b><br>FXO ------------- FXS<br><br>When I try to send calls from PBX-1 to PBX-2 I just receive the message: "Starting simple switch on 'DAHDI/1-1"<br>
<br>It seems like if PBX-1 couldn't send DTMFs, but when I set immediate=yes at chan_dahdi.conf at PBX-2 dialplan is executed at PBX-2 but nothing is heard at PBX-1<br><br>I'm using a TDM400P card, configuration files bellow<br>
<br><u><b>chan_dahdi.conf</b></u><br>[channels]<br>usecallerid=yes<br>hidecallerid=yes<br>callwaiting=yes<br>threewaycalling=yes<br>transfer=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>rxgain=0.0<br>txgain=0.0<br>
<br>group=1<br>signalling=fxo_ks<br>context=local<br>channel=>1-2<br><br>group=2<br>signalling=fxs_ks<br>context=local<br>channel=>3-4<br><br><br><u><b>system.conf</b></u><br>fxoks=1,2<br>fxsks=3,4<br><br>echocanceller=mg2,1-4<br>
<br>loadzone = fr<br>defaultzone = fr<br><br><br>Thanks by your help<br><br>Elder Arohuanca Lagos<br>t. +51 1 994149553<br>