<br><blockquote><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">> lspci can detect the card: 03:08.0 Communication controller: Digium, Inc.<br>
> Device 0220 (rev 02)<br>> dahdi_hardware also:<br>> astpbx ~ # dahdi_hardware<br>> pci:0000:03:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen)<br><br>Fine. The card is indeed handled by the module (+). <br>
<br>> astpbx ~ #<br>> But dahdi_tool does not show the card and dahdi_cfg gives DAHDI_SPANCONFIG<br>> failed on span 1: Invalid argument (22)<br><br>Next: are you sure that it is configured for E1 and not for T1? What is<br>
the output of:<br><br> cat /proc/dahdi/1<br></blockquote></blockquote>Please see what's there:<br><br>NET: Registered protocol family 10<br>lo: Disabled Privacy Extensions<br>eth0: no IPv6 routers present<br>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16<br>
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16<br>Found TE2XXP at base address f5100000, remapped to f8d64000<br>TE2XXP version c01a016a, burst ON<br>Octasic optimized!<br>FALC version: 00000005, Board ID: 09<br>
Reg 0: 0x2b817400<br>Reg 1: 0x2b817000<br>Reg 2: 0xffffffff<br>Reg 3: 0x00000000<br>Reg 4: 0x00000001<br>Reg 5: 0x00000000<br>Reg 6: 0xc01a016a<br>Reg 7: 0x90001300<br>Reg 8: 0x00000000<br>Reg 9: 0x00ff0000<br>Reg 10: 0x0000004a<br>
Found a Wildcard: Wildcard TE220 (4th Gen)<br>astpbx dahdi # cat /proc/dahdi/1 <br>Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) <br><br>astpbx dahdi # <br>astpbx dahdi # ls /proc/dahdi/1 <br>/proc/dahdi/1<br>
astpbx dahdi # <br><br><br>